Sebastiaan Mollema

Hi all, I hope you enjoyed this project. Let me know what you think or what you would do differently!

Thank you!

Oh yeah that would make a cool design!

That would be a good one, reading the time will easier :p

Thank you!

Hi all, I hope you can enjoy this little clock making project! Let me know what you think. Enjoy!

happy to do so!

hi thanks!

haha you should! right after the steak or burgers!

thank you!

Hi all, I hope you could enjoy this project. Let me know what you think!

Great Project! Might try it out!

It's at 24 VDC

Hi Tsanabe! thanks! Ok cool project! do you have any pictures? Is the weight still manageable? My bike is heavy in my opinion.

Hi all, I hope you can enjoy this instructable. Let me know what you think!

Hi Yolo pigeon, thanks for sharing. I hope there were no permanent damage or problems for you?

Hi thanks, for the input.So far it didn't break with me standing on it. The 4 screws can hold multiple persons if you only look on the shear strength of the steel. The holding capability of the wood isn't even taken in account here.

Hi all, this is little small tool or project. very handy and you don't need much tools. If anybody is helped with it I have free plans available.

Thank you! I'll give him some extra love today.

Hi all, this is a small and quick projcet I have been up to lately. I hope you can enjoy and inspire you!

Hi yeah thanks! ofcourse the board could be better, thanks for the tips!

Thanks! ok cool! Sounds like a solid base for a paddle board. We don't have that everywhere. I had to go to a specific EPS foam manufacturer if i wanted to organize something like that.

Hi jayed! thanks for the comment! To answer your questions:yeah as i said in the instructable. the goal for the project was using simple materials you can easily organize. And buying the a adequate amount of epoxy and glassfiber would make the project as expensive as a board you can buy. At least here in NL. So the design differentiates on using simpler materials and methods. Usign carbon fibre instead of glassfiber would yield more stiffness but that matererial is even more exotic and expensive than epoxy/glassfiberIn my case adding shape wouldn't add any function because the board ony has to float. Adding shape to the foam would only deduct material and give less 'floating' capacity.The swallow tail has no function.Don't get me wrong, I think my design and project goal were just diffe...

Hi jayed! thanks for the comment! To answer your questions:yeah as i said in the instructable. the goal for the project was using simple materials you can easily organize. And buying the a adequate amount of epoxy and glassfiber would make the project as expensive as a board you can buy. At least here in NL. So the design differentiates on using simpler materials and methods. Usign carbon fibre instead of glassfiber would yield more stiffness but that matererial is even more exotic and expensive than epoxy/glassfiberIn my case adding shape wouldn't add any function because the board ony has to float. Adding shape to the foam would only deduct material and give less 'floating' capacity.The swallow tail has no function.Don't get me wrong, I think my design and project goal were just different from making an board via normal materials and methods. Thanks for the great questions.

Your welcome! As david is saying, an epoxy resin work great with EPS foam but polyester resin will eat it away.

Thanks david, the board could certainly be better if it was longer and wider.

Oh yeah that would certainly be better. thanks!

Hi Alexei. thanks man! I am 63 kg and 1.72 m tall. Not that lage :p here in NL the prices are high aswell. They start from 350 euro's.

Haha Hi seamster, i know how it goes. Thanks!

Hi all, I had a lot of fun making this SUP board. I hope it might inspire you! let me know what your thoughs are?

Hi thanks! well the filter cost me 10 euro's and i can make two sheets out of that for this build. I made a few of these for a customer factory, and they change the filters every 2 two weeks so about a good 80 hours of 'on' time.

Hi Perilla, Thank you! sometimes simple solutions are right in front of us!It took me 3 to 4 times of rethinking what kind of fans would be suitable.

Hi james thanks! those additions could be very useful thank you fro sharing! yeah the filter material is quite cheap, ofcourse filter could give more flow and more filter capacity but both options will do the job.

Hey thanks, it's about 70 euro's.

ok cool, yeah the whole thing is quite simple, only a box with a filter.

Hey thanks!

Hi all, This is another project. In my opinion a smart combination. Usually fume extrator and dust filter aren't combined. Let me know what you think. Happy to hear feedback !

hi man, thanks! adding color i think is a cool idea! Yeah please share your work when you did it!

Hi guys, great looking project! I saw you were in the finals of the Home Improvement contest aswell. Good luck!

Hi Everyone, I hope this project might inspire you to make a Wall art piece out of waste material! Let my know what your thoughs are and Enjoy!

Hi man, well the particular bird I made this for likes to have this kind of (half)opening. So far I haven't seen those bird in my garden anymore, it isn't occupied. Maybe next year if i put some bird food inside it they will come.

He thanks! Oh yea you should go for it! It could be even done simpler or quicker than my process!

Hi Tinkerer, Thanks for the compliment! Oh man that's not making life easier. Overhere not everything is perfect, I did had to spend some time taking a careful look at the lumber in the store.

hey thanks for the support, raising one side is a good suggestion Thanks!

Hi All,This is a little instructable on making a modern birdhouse.Let me know what you think or if you have suggestions, I am happy to hear them!Enjoy!

He thanks, the layer held the insulation up aswell.

Hi Chris, thanks! yeah this was small enough for a permit here. Its about 10 m^2.

They are about 18mm, 3/4".

Thanks for the heads-up! The only animal which gets underneath is our own cat. Luckely there are no other real critters here. But It's a good point, I'll add it to the article. Don't want anyone having to deal with that.

Thanks! I will pass it on!

thank you Muthaf, the roof slope could be steeper. Then there would be less chance of wind and water blowing underneath.

Hi yeah, it could be, It can handle some weight, maybe 50 kg per m^2. But the snowfall the last winters were not that heavy, maybe 10 cm. If i lived more land inwards it would be a different story.