With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
DIY Lead Acid Battery Charger
After a LOT of searching, I found these two motors at surplus center. I'll have to gear down the final drive speed, but they are cheap and have so much maximum torque that they'll have plenty of reserves for bumpier ground. As a bonus, their form factor should hide well inside a horse leg.http://www.surpluscenter.com/Electric-Motors/DC-Gearmotors/DC-Gearmotors/500-RPM-12-VDC-GEARMOTOR-5-1754.axd (8.5in-lbs@220rpm, @$9.99)http://www.surpluscenter.com/Electric-Motors/DC-Gearmotors/DC-Gearmotors/500-RPM-12-VOLT-DC-RIGHT-ANGLE-GEARMOTOR-5-1816.axd (16in-lbs@220rpm, @$14.99)
I would try and find a couple of wheel chair motors or electric golf caddie motors, you can pick them up cheap or free
I would try to email this group who is always at Maker Faire showing off their wheeled creations and would probably have some good advice.http://miters.mit.edu/about.phpGood luck.
Choosing drive motors for kids riding toy
convention is like a Revolver. Maybe make an automatic, except holes go up And Down.
https://svapodmaking.wordpress.com/2014/09/14/bubb...The are some other videos you can find but it seems when you pull the trigger, it moves the bubble hoop(with rough surfaces on the ring to create a film) up across what I think is a diverter piece for the bubble solution output. It is just a flat bar which creates a curtain flow for the bubble hoop to pass through. That seems to spread out the bubble solution on the hoop without it being dipped into a bucket or really squeegeeing it on. Good luck.
Compact bubble gun mechanism?
ESP8266 12e with GPS & OLED display
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.