With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
And can you help me with step 2? Like, add more pictures or take it apart. Thanks!
In step 1 pic 1, is that red connector at the muzzle behind or broken? And in step 1 pic 1 too, is that a flex blue rod? And if you have time, can you make a magazine/mod for receiver that uses 1 or no broken pieces? And let the mag stick in, not just by gravity, but by ball-and-joint connectors or something. Thanks so much! Favorited.
Also, can you help me with the handle in step 2? As in, take top, bottom, and front pictures or even take it apart. Finally, where is the ram? I didn't even see a picture of it.
In step 1 pic 1, is that red connector at the muzzle behind or broken? And in step 1 pic 1 too, is that a flex blue rod? And if you have time, can you make a magazine/mod for receiver that lets the mag use 1 or no broken pieces? And let the mag stick in, not just by friction and tape, but by ball-and-joint connectors or something. I would be ever so thankful, and I'd tell all my knexing friends (0)! Favorited.
Yeah, I'll favorite and tell you if I made it. I'll be your biggest fan if you managed to make it shoot AND decreased the amount of broken pieces (they're really pissing me off -_-)
K'NEX RLSW V.1 (Red's Light Support Weapon) (Build)
No problem :)However, it takes a lot of tools and other not easily found stuff, so I suggest, as a V3, a modification to the lighter case itself so you don't have to remove the striker wheel and add copper pipe; the empty butane cartridge would be the tinder holder. Don't forget to credit me if you do make it :P
When exactly? It's been 2 years...Also, can you explain how the bullet barrel on the tommygun works? I'm just so confused by how this cylinder shoots...
Great and great-looking machine pistol! Can I use it as my secondary gun in my K'nex vs Nerf battle? It'll go on Youtube... please :)
No problem. Thanks for clearing the tape thing up. :)
Definitely K'nex guns. I cannot see what the point of a ball is (no pun intended XD) that just zips around on a track.
Guns, guns, guns. Especially CorgiCritter's guns... :) I cannot see what the point of a ball is (no pun intended XD) that just zips around on a track.
What was the weatherproofing tape for again? Because it only looks like a tiny strip of Velcro right at the front of each side...Also, the right side's litter mat shouldn't be necessary if there's an entire half of the IKEA shelf dedicated to pooping. XDOtherwise, looks great! I like how you usefd baking soda to mask the odors. You can put baking soda in a can, too (with a ventilated cap of course :P), and that helps absorb the odors just as well as baking soda on the floor; plus, it helps keep the cat from lapping it up.
OK, thanks! It's reassuring to see you active again.
I just got my boom cannon, HQ 12. Nice job, looks realistic!
How does the mag on this gun work? This secret magazine is a little *too* secret... :P
Does this have a magazine?
I agree entirely. This is a useful, comprehensive Instructable. The only problem is it's not really *trash* to treasure, but it's treasure for campers... :P Good job; keep at it! :D~ TCR
Make that 6 years... :P
build a 2-wheel cargo bike
I mean, how long does it take to crank?
I've read somewhere in some book: "The crossbow could fire 305 metres or more, but the bolt had to be cranked slowly back. Normal archers were so skilled, they could turn the crossbow-man into a pincushion in to time - unless he bolted first." Funny, but is the first sentence correct, in relation to your crossbow?
I have no idea what a walker is or where to find it... of the fact that it even exists at all :P
By the way, what holds that stock in? It looks like it might fall out at any awkward moment.
Great job, but what are you going to use it on?
Lucas teamed with Blue Mullet to make that... it's amazing how it can take 2 types of mags... O.o XD
How to make a K'nex solar alarm clock with built in small electronics charger and lockbox.
Well, I mean KSC is good at both weapons and not... Great job on this alarm clock! (And your EAP, might make it for my secondary!) So useful!
Woh. I'd be interested in doing the same thing. XD What rubberband(s) size and amount did you use?
Oh, NVM. It's a big pushbutton sort of thing on the outside of the handle loop thingy, cool! Wait, is it? I answered my own question :P
Well done, @travw. (I never understood how people could make instructions out of pics... :P) Crank up the brightness and resolution a bit, tho. 5* and subscribe to both @TheDunkis and @travw, nice job!
Where's the trigger? O.o
BTW, does it have a tactical rail?
I agree. Up with Windows, down with Linux, and Apple is only good for its iPhones and iPads. But if you know some good programming, Linux is probably the best!
Er... this is a little off topic... XD
The Z35? O.o That's even better than this gun. Trust me, I personally built the Z35 with all its features; it was AMAZING!!!! Anyway, great job Alien Terminator!
RIP... roasted to a crisp XD. I agree with both tho...
Good question. O.o The video doesn't work, and then it seems like the white rods have to go through that tan clip! (If they're the ones meant to shoot...)
IKR? Great job, but add instructions. Too bad all the best guns have no instructions...
YOUR zkar? I don't think so O.o
I agree with Oblivitus, but that might break a few pieces like his Z35 when I had fun with attaching/detaching the mags... XD
Me 2 XD
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.