3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Apr 7, 2012
67,385
%28%
%0%
Visit Our Store »
Go Pro Today »
Comment: If you don't mind me asking were did you see this page? I have been getting like 1 -0 v…
Comment: Thanks,it's nice to know people actually read these, and use them.
Comment: I just saw this http://www.boostedboards.com/ I also saw an article about using the s…
Comment: How'd you do?
Comment: Scarlett Fortress
Comment: Olympic Oval Calgary Alberta Canada.
Comment: Yeah the place to put those comments was you're orangeboard.
Comment: I'm "Beetle" brox. I spelled it wrong.
Comment: That's good, I was expecting they'd be pretty slow like 100 or something. Great project…
Comment: thats were I ran into problems designing a case for my own phone, the edges and top are…
Comment: How fast do they go?
Comment: Thanks, I was hoping it would be less.
Comment: How much does all the stuff cost ?
Comment: I like this allot, too bad I don't have an I Phone. Any chance you will be making this …
Comment: in the top right of you're instructable there should be a little edit button. Then you …
Comment: How do the shells work? (ie. what makes the bbs shoot)
Comment: This is great, I had the same idea when I saw what 3D printers could do. Unfortunetly t…
Comment: Are there special rules to the game or is it normal chess with pieces that you have to …
Comment: That's great, bet it took a while to clean the printer out.
Comment: I don't know about most of the people in the world, but I think rain,snow,sleet, any ot…
Comment: Studded in the future? (i.e could you incorporate studs, and would they be able stay in…
Comment: A programmed translator is available from here. just type in what you want said and it …
Comment: I don't know that you will be able to calibrate the aim, my experience is that the BB's…
Comment: That would probably be better, but it's too late for me to change. Vary interested to s…
Comment: I don't think so, the holes are just bellow the rail. I think I left enough room. We'll…
Comment: Thanks great to see him(it) in action.
Comment: I second the video
Comment: or have a backup like some strong rope or something.
Comment: Sometimes the old tech is not a great idea, high performance riders need (at least some…
Comment: The best combo of bike building and ease of doing so, is probably ordering a bike.Like …
Comment: As I said above please DON'T use it online. Play against your friends or the cpu. Besid…
Comment: I saw the same one in The Source (electronics not snowboard) at the front of the store.
Comment: No, I don't have one at least not one powerful enough to do anything. So I don't know …
Comment: Thanks, Ill post pics when it gets here. Do you like it enough to vote for it?
Comment: The answer to Life, The Universe, and Everything. Do you know what the question is?
Comment: All else you need is some coconuts and pigeons! Well done, you have my vote.
Comment: Hi, Instructables is now awarding free 3D prints. The bounds are 3" by 3" by 3". Do you…
Comment: Why did you put the rods through the parts?
Comment: Well than its just a coincident.
Comment: This lines up almost perfectly with the real instructables site changing. I wonder if y…
Comment: Sorry I don't know were I got the flashlight, I've had it for a long time.
Comment: I was told how I've posted it.
Comment: Thanks for all the help. I'll upload the .stl.
Comment: BN?
Comment: Thanks I'll use flashes I guess.
Comment: Could you use a potato peeler or does it not work on watermelons.
Comment: With my experience 123D Catch hates flashes. It's suggested that you don't use them.
Comment: Your welcome.
Comment: Apparently not, how about a .dwg? Unless you know how to export a .stl from inventor, c…
Comment: Depends on how long it is cooked, the longer the more brittle it is. Take small amounts…
Comment: It's called Vulcanizing Cement. You can find it in automotive stores (I think).
Comment: Was this featured? I saw it in the featured section of 3D printing in the technology se…
Comment: Thanks i'll do that.
Comment: Now all you need is a "Don't Panic" button.
Comment: Ok never mind, I get an HTTP error every time I try and upload the assembly. Any thoug…
Comment: I haven't attached the two yet because they are in different formats. Will post the fil…
Comment: Here it is, sort of
Comment: Win a contest no mater how small.
Comment: I'll see what I can do. But I'm new to modeling so it might take a while.
Comment: Wow, I totally din't see that button. Really feel dumb now.
Comment: How do I submit an Instructable to the group?
Comment: I though you meant Magazines as in the clip that holds the bullets. I was really surpri…
Comment: Thanks, took allot of work, but it's worth it.
Comment: Is it jailbroken?
Comment: If you have a jailbroken ipod you can put it onto your own device easily. Or you should…
Comment: Thanks for showing me the software
Comment: Thanks used it and posted the pics,
Comment: How do you recommend digitally doing a schematic, I know there are sites but I've never…
Comment: Idk but I know that it only has an edge on one side, it's designed for a left handed pe…
Comment: That ironable tape sound like a great idea. The large beach towel is preferable, howev…
Comment: I wont don't worry
Comment: Really want to see how you did the Spirograph stuff, please reply once you complete tha…
Comment: Thanks for your tips.
Comment: Had new pads, used automotive brake cleaner too. Taken it to a mechanic, he couldn't fi…
Comment: Good idea. I'm just wondering did you have any troubles entering in this contest, It t…
Comment: three?
Comment: You could either use the blur/smudge tool or a option from the top that trims a little …
Comment: Illustrator's pen tool works differently (in my opinion better). The way I make tentacl…
Comment: Some flash stuff is vectored and some Photoshop stuff is (vector drawing tools) however…
Comment: I imagine the ride would be much bumpyer.
Comment: So far my contact cement patches are holding up. After a year I think you should be abl…
Comment: Thanks
Comment: I never experimented with slowing it down but I would recommend putting resistors on th…
Comment: LDRs are light dependent resistors right? Take a simple program that reports the value…
Comment: Thanks again, we didn't bleed the system and its working fine. It is a good idea to pum…
Comment: Thanks, I didn't know that.
Comment: Thank you for all your tips, I called them saddle bags because I wasn't sure people wou…
Comment: Ok I get it., I guess that would work, but sandpaper (or just sand) is lighter and smal…
Comment: Congrats you're the 42nd entry in the bike contest (If you have no idea why thats impor…
Comment: Just like to let you know that I built one of these and that it works as a vary unique …
Comment: I'm not sure what you mean. (probably my fault). What do you mean as a buffer?
Comment: Thanks, It was.
Comment: I made my own mostly because I had the materials lying around. btw my dollar stores don…
Comment: That would work well for this.
Comment: Sorry for my grammar, the plastic bags are Ziplocs they have an air tight zipper like c…
Comment: Thanks for the tip, I just rolled mine like a dry sack.
Comment: Good to know, next time I find myself crossing the Nubian Desert I'll make sure I pack…
Comment: Yes
Comment: Either Contact cement (see materials step), or vulcanizing fluid (I don't know what tha…
Comment: Thanks
Comment: I haven't seen any, mind you I haven't looked. Maybe that will be your next ible.
Comment: It's nice to know that contact cement does have some benefits.
Comment: Never thought of that, but isn't it easier to just open the can the way it was meant to…
Comment: Thanks, I've never had a can last that long usually only 2-3 years.
Comment: Thanks, helpful critism is good.
Comment: Thanks i forgot to add that (will do). I always take the chance and clean my tire out a…
Comment: They make it a little heavier good luck.
Comment: Thats a good idea, I personally don't have nail polish bottles.
Comment: The stuff from the patch kits is vulcanizing fluid, I don't know what the differences a…
Comment: Maybe it's not the best but it has worked quite well for me and my family and friends.
Comment: That would be vary upset.
Comment: Once you get the email saying that you won a3d print send it back telling them you want…
Comment: Not that I can find on instructables, but shapeways and other 3 d printing sites have m…
Comment: Ok cool, I didn't know that for the print that I won. But I think you guys would have c…
Comment: If you win a 3d print do you get to choose the material?
Comment: Electronic tips and tricks contest gave away three dee prints and so did the make it re…
Comment: The only time i needed to patch a tire like you mentioned was on a wheel barrow, I did …
Comment: Sorry the chisel I used was a cold chisel not a sharp one meant for cutting wood. It's …
Comment: Much better than my attempts with a wood usb drive, nice work.
Comment: Thank you forgot to write that up, it's in the ible now.
Comment: Your right I should have had a mold or something.
Comment: The lolipop was an accident the candy cooled while we were working the other one, so i …
Comment: If I do it again and I can find some female connectors I will defiantly do that, as it …
Comment: Thanks for the link but I prefer to scavenge my parts from old electronics.
Comment: IF only I'd know a little earlier I wouldn't have bought an Uno, Thanks for sharing.
Comment: I tried to use pvc because it would be lighter than wood and cheaper.
Comment: The metal pipe we used was about 5 feet but it is used as a lever, I think a foot or so…
Comment: I'll take that as a complement, Thanks.
Comment: If you do make it please reply to this comment as I would like to see how you did it. H…
Comment: K, it worked for me. But I'm using a smaller DSLR and go pros mainly. No battery pack.
Comment: Could you do a similar thing but with the light on the inside so it projects a big imag…
Comment: For even cheaper this would work.
Comment: I haven't seen it yet but, I heard it was good. If you build enough eventually you'll h…
Comment: LOl, Thats how most of my circuits turn out. Thanks
Comment: If you take one set of lenses and put them back in the completely wrong way you get a …
Comment: Defiantly have my vote for the fashion contest. Maybe you could use plaster of paris f…
Comment: Nice project. I like how the scissors and can migrate in the first video, did you do th…
Comment: Nice work,However maybe you should just add multiple pictures to one step rather than h…
Comment: Oh now I see what you mean. "duh" Yeah we might try this with a couple of go-pro's if …
Comment: I've also never looked for tankards. I liked wax because I could reuse it over and over…
Comment: Oh whats a 3d photo? Like 123d catch?
Comment: Thanks for your ideas, however I don't think I've ever seen those pewter tankerds you a…
Comment: Thats cool, I never knew that 3d scanning with photographs was so precise. You could do…
Comment: Yeah I guess you could, You could use it to take multiple shots and stitch them togethe…
Comment: The knob was made from bought lead free solder. The other objects that I made (usb stic…
Comment: or polyurinthane if you want the metal to be seen
Comment: Good luck. Even this one is much to complicated for me. Really like to see the one with…
Comment: Thank you.
Comment: Thats the best geocahe I've seen, on your intro step you still have INSERT STEP NUMBER …
Comment: I was going to add that and many other things today last night I was too tired to stay …
Comment: If only you'd enter in the speed challenges too.
Comment: Thats cool. Maybe you could 3d print/laser cut the cams so there sturdier, they looked …
Comment: Thanks. Considering using this.
Comment: Thats good to know I'm glad I don't have to compete against you guys.
Comment: I'm interested in building a go kart over the summer. Could you post a video to show th…
Comment: Just wondering are the instructables staff able to win the contest(s)?
Comment: You could enter this in the green tech contest (i think).
Comment: sweet the one you sent me before was pretty good maybe a bit thin. Anywase I'll invest …
Comment: btw do pms show up in you're instructables inbox? if so your message hasn't reached me…
Comment: Thanks
Comment: Is there any way to export it as an .obj instead I am much more comfortable working in …
Comment: Thanks hope it's real world scaled and not just trying to look good. Guess I'll have to…
Comment: Do have any tips for modeling a phone case, I'm having a hard time trying to get a dece…
Comment: Thank you vary much. Vary glad to get to see this stuff.
Comment: Nice work, just wondering do all 3D printers require a pressure wash afterwards or just…
Comment: I think 123d Make by autodesk has a folded paper option that you could use instead of p…
Comment: K guess I'll save some money.
Comment: Sweet, I'm stuck on what batteries to use and how to charge them.
Comment: Cool.
Comment: I got the email telling me that I won a free print, answered that I wanted to print my …
Comment: Just wondering did you win a free 3d print for being featured in The Make It real Conte…
Comment: Just wondering did you win a print for being featured in The Make It Real Contest
Comment: Just an idea looked like you had a good black background to shoot against.
Comment: Will do. Still waiting on the weather to model the rest of the family.
Comment: Here is the real two headed version of me: Link Great work with the floppys, do you th…
Comment: Sketch up just doesn't compare, hope you have fun with blender.
Comment: Congrats you're my 42nd comment. If you have no idea what I'm on about read Hitchhikers…
Comment: Have you tried blender
Comment: too bad thinking about making a go cart, guess I'll have to look else ware for motors.
Comment: Cool
Comment: will a couple/four move a person?
Comment: Thanks. I am currently mutating the rest of my family, if I get a free print I'll post…
Comment: That's cool
Comment: What happened to it to turn it red (pic 1) or did you print it that way?
Comment: K I looked at my board, when you say it has 222 on it is that on the component or the P…
Comment: Congrats on winning the Arduino contest!
Comment: As I said above I have entered it. How will I know if I won a 3D print?
Comment: I have entered this in the make it real contest. Maybe it wasn't accepted when you guys…
Comment: Give me a day or so. I have to find my car and find out what it is then I'll reply back…
Comment: at the time it was dark seeking because my house was mostly vary bright so I switched i…
Comment: too bad
Comment: more of a joke because of the way it looked. But ya I see how throwing it would't work.
Comment: have you thought about doing something sneaky with this and entering it in the spy chal…
Comment: Does it throw well? Either way nice knife been thinking of making my own custom knife,…
Comment: Still be sweet. to bad I only have 1 floppy so i don't think I'll be making it but I'd …
Comment: Like to see it. Full on death star?
Comment: Yay Spinal tap references you have my vote for the metal challenge.
Comment: K just wondering if it was extra strong or something, mine's bright orange.
Comment: What country did you get you're duck tape in, its a different color from mine. Or is it…
Comment: Thanks post a pic if you do.
Comment: Glad I could help "His head sends his apologies."
Comment: Make It real challenge
Comment: Thanks. I'll think about it.
Comment: I don't have the funds. But hopefully I can win the judges prize and maybe get my own. …
Comment: Thanks. saved me some experimenting. If I get one working I'll post a pic.
Comment: I wonder if it work with a pop can. Or would the hole be to big.
Comment: Good to know they sound perfect for my project. (see what I did there they "sound" p…
Comment: Thanks for the warning.
Comment: Thanks glad you like it. please vote for it in the contest.
Comment: Yeah probably could have done better but I don't have a teeny. If I win the contest I w…
Comment: wow didn't know they were so cheap. Considering building a larger robot in the summer t…
Comment: Site?. Only place near me is solarbotics they have good stuff i think. I was more inter…
Comment: Thanks.
Comment: I'm in Canada so i think I'd have to order them
Comment: Nice. Just wondering were did you get the motors?
Comment: Thanks will do
Comment: Thanks hope you have fun building it.