Tell us about yourself!

Complete Your Profile
  • anwaralgacemy commented on Sardau's instructable Build a 30$ Laser Scanner8 months ago
    Build a 30$ Laser Scanner

    thank you for your cooperation.. which file format you suggest me to export from sardauscan??that help me to get the color information in meshlab thank you

    thank you really i solved the problem , my arduino nano was damaged i replace with new one and it work perfect.thank you again

    Hiplease i need help:: how to recover the color of my model.I uploaded my model in .xyz in to meshlab and i got good result , but there no color how i recover the color of my model please any suggestion or guidance i will really appropriate thank you

    View Instructable »
  • DIY: How to Make a Low Cost 3D Scanner

    Hello John Really it great job that you did , thank you sharing really it helps me a lot ...I have some problems :: 1. How can I recover the color of the object that am scanning using meshlab ...2. " is it possible to controller meshlab server from matlab,, I want to build GUI in matlab that can able to open and run meshlab from matlab"Please any help or guidance or any suggestion will be really approtiated Thank you

    View Instructable »
  • anwaralgacemy commented on Sardau's instructable Build a 30$ Laser Scanner8 months ago
    Build a 30$ Laser Scanner

    Hi dear MichalR23did you fixed the problem because i facing the same problemsplease guide me how to solve this problemthank you

    View Instructable »
  • anwaralgacemy commented on Sardau's instructable Build a 30$ laser Scanner8 months ago
    Build a 30$ laser Scanner

    hiii sardau I am using I have arduino NANO boardmy stepper motor is rotating only counter clock wise when i adjust from the turning table, it does not rotate in clock wise.and when i start to scan the stepper motor does not rotate...please help me

    View Instructable »
  • DIY: How to make a Low Cost 3D Scanner

    Dear johnl375really grateful job it will helpful for all,I have some question regarding using MeshLab for enhancing the result... how you fill up the hols at the top side and bottom of the object that undergoes the scanning process? what algorithm you use to fill the holes?thank you

    View Instructable »
  • anwaralgacemy commented on Sardau's instructable Build a 30$ laser Scanner11 months ago
    Build a 30$ laser Scanner

    Dear SardauReally thank you for your best cooperation and your kindness thank you very much

    View Instructable »
  • anwaralgacemy commented on Sardau's instructable Build a 30$ laser Scanner11 months ago
    Build a 30$ laser Scanner

    hello SardauI am willing to use sardauscan laser Scanner, kindly may asked how to get the turning table (table_AXLE.stl), I all the STL files of the design is available except the file for table_AXLE. stl.Also I want to build the circuit in schematic, what software you recommended me as I need to show my lecturer that project circuit function well in software first before I build the hardware part, I tried to use Proteus for building the circuit, unfortunately I didn't find the liner laser in the Proteus library and the type of stepper motor that you use for this project any suggestion or guidance is highly appropriated thank you

    View Instructable »