Tell us about yourself!
I did not read, went straight to the vid... first I wondered what the heck!?!? But only after realized you were feeding 1$ and getting 5$ out. (That darn monochrome US money, pref the monopoly/multicolore Canadian) Any how, really cleaver, I like!!!
Hi, did really similar in my garage, just one little thing my ceiling tape mark (or screw holes) were where strapping are, which should be standard. There are not giving any indication as were the joist/trust are, they are usually perpendicular to the strapping. Strapping is not as strong as the joist themselves (usually 2x1). I had access to the attic, so went in it and punched a hole thru the gypsum so my 2x4 got connected to the trust/joist.
Controlling Motor Speed
Leather Hardware: Rivets
Leather Hardware: Snaps
Simple Leather Wallet: Layout and Trace
Leather Tools and Supplies
Yes you could put the jack on top.This layout (jack under) makes the spout at a nice height to place a glass under it.With jack on top, you need a riser which make the jack handle higher. But end result will be the same.
Tools & Supplies
Flexible Block Molds
Introduction to Mold Making & Casting
Mold Making & Casting Class
Metalworking Tools and Materials
Build a foundry and sand-cast aluminum.