bradsprojects
Instructables 
Achievements
Patches
Best Answers
Comments 1-10 of 119(view all)
» Hi, these different part numbers are all the same chip, however just built into a diffe…
» Hi, check out this link: http://www.microchipdirect.com/productdetails.aspx?mid=10&…
» Hi, you can find the schematic on step 2 of the project. (it is a PNG compressed in a z…
» Unfortunately I won't be able to do it because I am just too busy.You can have a look o…
» Yes, those are the ones that I use.
» You just need to cut them so that the copper is removed, leaving just a channel of pcb.…
» check out this image:http://www.ianstedman.co.uk/Projects/TK3_PICKit2_adaptor/tk3_picki…
» Yep, check it all out here: http://www.bradsprojects.com/electronics/Bradsprojects-Sup…
» You could do that although just as you say, you would need a high power darlington pair…
» Good work!There are certainly some digital pins not used. In the revised version of the…
» Hi, check out this link: http://www.microchipdirect.com/productdetails.aspx?mid=10&…
» Hi, you can find the schematic on step 2 of the project. (it is a PNG compressed in a z…
» Unfortunately I won't be able to do it because I am just too busy.You can have a look o…
» Yes, those are the ones that I use.
» You just need to cut them so that the copper is removed, leaving just a channel of pcb.…
» check out this image:http://www.ianstedman.co.uk/Projects/TK3_PICKit2_adaptor/tk3_picki…
» Yep, check it all out here: http://www.bradsprojects.com/electronics/Bradsprojects-Sup…
» You could do that although just as you say, you would need a high power darlington pair…
» Good work!There are certainly some digital pins not used. In the revised version of the…
Orangeboard
10
comments
|
Add Comment
|
Nov 7, 2011. 5:10 PMhrodriguez7
says:
hey Brad,
you said in the video of super pixel bros. that you'd send people a free kit
I wouldn't mind getting one
what do I have to do?
you said in the video of super pixel bros. that you'd send people a free kit
I wouldn't mind getting one
what do I have to do?
Jun 4, 2011. 11:09 AMnbsrujan
says:
hello brad
i've started my project of rgb pov display showing video. Iam facing lot of problems in writing data in eeprom. Will you please suggest me code of interface between atmega 16 and eeprom 24c1024 as soon as possible.
thanking you
i've started my project of rgb pov display showing video. Iam facing lot of problems in writing data in eeprom. Will you please suggest me code of interface between atmega 16 and eeprom 24c1024 as soon as possible.
thanking you
Hi, unfortunately I can't help you with that because I only program pic microcontrollers, not atmel.
The programming is different between the two.
But to write data to eprom, you will need an eprom programmer (search for one on ebay) and also an eprom eraser. Your best option is to get EEPROMS because you don't need a special eraser for them.
The programming is different between the two.
But to write data to eprom, you will need an eprom programmer (search for one on ebay) and also an eprom eraser. Your best option is to get EEPROMS because you don't need a special eraser for them.
Thanks very much = )
I certainly will get around to posting the LEDBOY. I was programming it in assembly but have now moved onto a different programming language so I need to port the code over.
I certainly will get around to posting the LEDBOY. I was programming it in assembly but have now moved onto a different programming language so I need to port the code over.
Mar 1, 2010. 10:10 PMGeekmandude
says:
Hey brad!
I would like to make your Christmas Card game, I went to bradsprojects.com and there doesn't seem to be any content. The forum works and if you search it gets results, but if you click on any of the projects or search results you get nada. Does this happen to you?
Thanks.
I would like to make your Christmas Card game, I went to bradsprojects.com and there doesn't seem to be any content. The forum works and if you search it gets results, but if you click on any of the projects or search results you get nada. Does this happen to you?
Thanks.
Hi,
I just checked the site also and it does look to be messed up. I will have to get around to fixing it. All the content is still there (when I go into the admin section) but for some reason it is just not being displayed...
The forum has been strange also for a while?
I just checked the site also and it does look to be messed up. I will have to get around to fixing it. All the content is still there (when I go into the admin section) but for some reason it is just not being displayed...
The forum has been strange also for a while?
Sep 27, 2009. 5:31 AMInstructables Robot
says:
Hello! Welcome to Instructables!
I am the Instructables Robot. My job is to alert you whenever someone leaves you a comment or sends you a private message. I spend most of my day sending email. I like sending email.
You probably want to upload an image to your profile. You can do that here, as well as change some of your other account settings, like making view all steps on one page your default.
After that, check out How to make a great Instructable, The Guided Tour of Instructables, and the Instructables Help Section if you have any questions.
Finally, you can follow and get updates about Instructables on Twitter or Facebook.
I am the Instructables Robot. My job is to alert you whenever someone leaves you a comment or sends you a private message. I spend most of my day sending email. I like sending email.
You probably want to upload an image to your profile. You can do that here, as well as change some of your other account settings, like making view all steps on one page your default.
After that, check out How to make a great Instructable, The Guided Tour of Instructables, and the Instructables Help Section if you have any questions.
Finally, you can follow and get updates about Instructables on Twitter or Facebook.
 |
