With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
I used a piece of plexiglass. To cut the zero clearance slot I reversed the blade. This reduced the amount of debris flying all over. I used a straight cut router to cut the rough shape and then sanded it down using fine sand paper for metal finishing.
I've found that a drop of super glue on the tip of the small screw driver will make it easy to extract those small screws. It is a tedious operation as you will have to "snap" the screw off the tip and re-apply the glue for every screw but it works.
Pasta Making Class
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.