Tell us about yourself!
Hi Amanda,Witch slicer using because the STL generat is big and CURA crash. Coold you tel me witch software use to have de gcode.
Thank for your reply
Hi, thanks for your project.Do you have a link to buy 10kΩ resistors (SMD version)I'm looking for 10kΩ resistors (SMD version) on google and they are a diferente products.Thanks
Raspberry Pi Class
Hello Amanda,The vinyl 3D generate with record generator as somme error.when i repair the STL with Slic3r there are a probleme of layer. How resolve this probleme and use the STL to gcode.Do you have this probleme to print the STL?
Hello Amanda,I resolve my probleme and i made it.Could you tel me de good parameter for a rmp 33.3I have take the following parametter an i have a little disque. 11.8 m x 11.8 mrpm = 33.3;//rev per minfloat secPerMin = 60;//seconds per minutefloat rateDivisor = 4;//how much we are downsampling byfloat theta;//angle variablefloat thetaIter = (samplingRate*secPerMin)/(rateDivisor*rpm);//how many values of theta per cyclefloat radius;//variable to calculate radius of groovesfloat diameter = 11.8;//diameter of record in inchesfloat innerHole = 0.286;//diameter of center hole in inchesfloat innerRad = 2.35;//radius of innermost groove in inchesfloat outerRad = 5.75many thanks.
Hello Amanda,I resolve my problem and i made it.But i have a little disque 11,8 mm x 11,8 mm.How to make a 3d Printed Record with the good dimention ?
Hi, When i execute the file 'wavtotext.py' python give me the error message:Traceback (most recent call last):File "C:\users\sylva\Documents\projet LABFAB\enregistrer un disque 33T\3DPrintedRecord-master\Processing3DPrintedRecord\wavtotext.py", line 34, in <module>frameOneChannel[i] = frameInt[4*i+1]*2**8+frameInt[4*i]#separate channels and store one channel in new listTypeError: 'map' object is not subscriptableCould you help me refering my error.
thank for your repy
Hi It is possible to have the code to make 33 45 78 rpm? It is possible to have in stereo the 45 and 33 rpm?
Hi,I have the same probleme of Koos007I using the software Processing 3;1.2 64 bit on w10 because Processing 3.2.1 don't work correctly on W10.Witch version of Proccesing work correctry with CuttingRecordGenerator.pde?
Good projectI did not find the program or code to do the following (i download the processing 3 softwar):- draw record and groove geometry- export model in STL format (the link is break)could you help me to made your project,
I love it. This is a great project.
oh no your very crazy to make it on your body.
yes thi is a very amazing work. But how do you have it this idear?
thanks a lot for this information but how to made it?
good jobge refering your project.But how to manage the different colour with your 3d printer?
Good work.what print 3d ussed to add this one?
Good job. Could you tell us witch sort of softwer do you us with the different tools (pen, spindle, cutting end engraving,).Sorry refering my english, i'm a french guy.
Hi,Many thing to have explaine this project.