chantling
- Date Joined:Jul 25, 2007
- Instructables:1
- Total Views:44,415
- Featured %:100%
- Subscribers:7
- Topics:1
- Comments:8
Instructables 
Patches
chantling has not received any patches yet... send chantling a patch!
Forum Topics
last post by chantling
4 years ago
3
replies
Filtering out certain categories while browsing
posted 4 years ago
in Tech
Comments
» This is absolutely amazing. I'm always impressed when somebody builds up some incredibl…
» Not sure. I used some that I had lying around the workbench. They're high intensity, …
» Hmm, not sure what's happening here if the glasses blink properly otherwise. You're sa…
» The acid is 31.45%. I've since tried etching a 3"x4" piece of scrap pcb (double-sided, …
» I made a batch and tried it out on a few tiny (1"x1.5") boards; it went through the fir…
» Made a couple of changes. Had the wrong price for the 7805 from Digikey; added links t…
» That's a good idea; I might consider it if battery life turns out to be an issue. I'd …
» Not sure. I used some that I had lying around the workbench. They're high intensity, …
» Hmm, not sure what's happening here if the glasses blink properly otherwise. You're sa…
» The acid is 31.45%. I've since tried etching a 3"x4" piece of scrap pcb (double-sided, …
» I made a batch and tried it out on a few tiny (1"x1.5") boards; it went through the fir…
» Made a couple of changes. Had the wrong price for the 7805 from Digikey; added links t…
» That's a good idea; I might consider it if battery life turns out to be an issue. I'd …
Favorites
Orangeboard
3
comments
|
Add Comment
|
Apr 30, 2010. 4:14 AMmcgiwer
says:
Could you re-add the documents with better quality of the pics? the schematic and boards are quite readable
Oct 25, 2007. 2:52 AMdrewb0y
says:
I have built this circuit using your instructions plus a few embellishments. I added the switched power input jack, the potentiometers from the original schematics, and a second channel for left/right, also on the glasses i used 2 lead bipolar red/green leds and added a set of dpdt switches to switch eithr left/right to red or green. So far I have only tried it with BWGen and your test file and it seems to work. However when you run the setup on BWGen and it goes through the audiostrobe device testing, nothing happens. When using BWGen or the test file, the lights do blink when the potentiometers are adjusted properly. Have not tried Gnaural or any premade mp3s yet. Do you have any idea what the BWGen testing is looking for in order to pass the testing thst is missing? Thanks and great project.
Thanks for sharing your project, and welcome to Instructables!
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't seen these, here's a guided tour of Instructables and an Instructable for making Instructables.
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't seen these, here's a guided tour of Instructables and an Instructable for making Instructables.
 |
