chevy62
Instructables 
Patches
chevy62 has not received any patches yet... send chevy62 a patch!
Forum Topics
last post by lemonie
1 year ago
2
replies
how do you make a slide show for my instructables
posted 1 year ago
in knex vehicle
Comments 1-10 of 254(view all)
» Thanks
» No promisises I want to get to it but I might not
» I might improve it but most likely not I don't have it anymore and I and trying to sell…
» I have built pcs not gaming ones but they ran great
» nice you should make a slide show on it.
» yeah it looked cool but i didn't work so well i had to re design my steering and got ri…
» I have a scooter with skateboard trucks on front and back and has longboard wheels on i…
» Good job to danymw and CRAZYCREATOR187 but that suspension and steering was over board …
» no, i am leaving it rear wheel drive for now but i want steering and suspension on the …
» i have plenty of parts but i am going to put a motor to your suspension and steering so…
» No promisises I want to get to it but I might not
» I might improve it but most likely not I don't have it anymore and I and trying to sell…
» I have built pcs not gaming ones but they ran great
» nice you should make a slide show on it.
» yeah it looked cool but i didn't work so well i had to re design my steering and got ri…
» I have a scooter with skateboard trucks on front and back and has longboard wheels on i…
» Good job to danymw and CRAZYCREATOR187 but that suspension and steering was over board …
» no, i am leaving it rear wheel drive for now but i want steering and suspension on the …
» i have plenty of parts but i am going to put a motor to your suspension and steering so…
Groups
Orangeboard
119
comments
|
Add Comment
|
| 1-100 of 119 | next » |
Jun 22, 2010. 3:47 PMchevy62 (author)
says:
thanks i am proud of my stuff. i am going to post a motorized truck and it is really fast. i will post some pics of it sometime tomorrow. so if you want some pics of it they will be on some time tomorrow.
Jun 25, 2010. 6:33 AMchevy62 (author)
says:
i can't get the pics on for a little bit longer they shouldd be on by next saturday not the 26 the nex.t wekkend if that is okay
Jun 25, 2010. 1:27 PMchevy62 (author)
says:
do you know of any good knex motorized knex vehicals if so leave a link please and thank you
I made a knex front end loader that I put a motor on here is a side show link http://www.instructables.com/id/Front-end-loader-made-out-of-Knex/!!
Jun 28, 2010. 1:29 PMchevy62 (author)
says:
just saying i need somthing that is realy fast light wheight and is good for raceing agenst friends. but i did like your front end loader good job.
Jun 29, 2010. 9:40 AMchevy62 (author)
says:
do you know of any good motorized racecars that are fast realy light weghit if you do could you please leave me a link of it thanks.
Jul 11, 2011. 11:54 AMchevy62 (author)
says:
can i have a link to the instructions to the finished p90 or and i have the forum link of the finished p90
Jun 23, 2011. 1:17 PMchevy62 (author)
says:
please post it today please i will be super happy
lol, it should be up 2moro, have most of the SOPMOD done now, and i still need to get the pin in
Jun 23, 2011. 1:39 PMchevy62 (author)
says:
i want the silencer and the red dot sight but not the other stuff
Jun 23, 2011. 1:55 PMchevy62 (author)
says:
and is it simalier to the old one i liked how the old pin guide and stuff was
Jun 23, 2011. 1:51 PMchevy62 (author)
says:
that is okay but there are some things that are not needed
Jun 23, 2011. 1:58 PMchevy62 (author)
says:
does it look like a p90 if i don't i will copy the old one
Jun 23, 2011. 2:00 PMchevy62 (author)
says:
i hope i am worried that it won't that is why i wanted it posted soon so i don't have to worry about how it looks
i will be, ive already made the removable ironsights, now the acog, the post time =D
Jun 23, 2011. 5:04 PMchevy62 (author)
says:
what do you mean post time i hope it is what i think :D
lol, ill post it on ibles when ive made the last attachment, the acgo scope =D
STOP BUGGING ME! IT WILL BE POSTED WITHIN THE NEXT DAY OR 2, I MAKING THE ACOG SCOPE THEM IM DONE, HOW HARD CAN THAT BE TO UNDERSTAND?!?
Jun 24, 2011. 10:44 AMchevy62 (author)
says:
SORRY I WAS JUST ASKING I WILL NOT TALK TO YOU UNTILL IT IS POSTED I CAN WAIT I WAS WONDERING
You can talk to me, im fine with that, just stop asking when will it be posted, i dont like rushing with knex because my standards will go down.....
Jun 24, 2011. 10:54 AMchevy62 (author)
says:
sorry about that i do that to i don't like to rush either i just didn't know you were the same way so now i know a little more about i will just wait for it to be posted
ok, thats grand..... when youll see it, youll love it, trust me, tis epicness =D
Jun 24, 2011. 10:58 AMchevy62 (author)
says:
cool when it is done and i make it could i post a slide show of the changes i did but how you build i expect there to be nothing to change you build amazing things and alot of them i would not change
Jun 26, 2011. 12:11 PMchevy62 (author)
says:
haven't talked to you i a while are you having a good weekend because i am
lol, yep =D p90 sopmod failed lol, just has a heartbeat sensor, silncer and ironsights now...
Jun 26, 2011. 2:35 PMchevy62 (author)
says:
cool how is it going is that all that you have left to do
Jun 30, 2011. 10:18 AMchevy62 (author)
says:
you don't say it will be realy the same you say it going to be better
Jun 30, 2011. 10:00 AMchevy62 (author)
says:
both ways will work just well what are the ranges on the beast p90
true..... i got 50ft max with the v1 so it should be the same really
Jun 30, 2011. 9:50 AMchevy62 (author)
says:
that will work but i will cotter pin it because i can take the cotter pin out if i need to
Jun 30, 2011. 9:41 AMchevy62 (author)
says:
a cotter pin is a metal pin that your drill a hole in what ever you want it to hold together and then you put the pin in it and been the two things over that holds it in so they don't fall out
Jun 30, 2011. 9:35 AMchevy62 (author)
says:
you could use a cotter pin instead of melting it and thank god it is going to be up soon but i can wait
Jun 30, 2011. 9:30 AMchevy62 (author)
says:
why are you going to melt it together why don't you use a cotter pin and when will it be up
good, modded the looks a bit, gona do the pin 2moro because i need to find the tool to melt it togeather =D
Jun 27, 2011. 9:56 AMchevy62 (author)
says:
my computer is doing it again so i will reply to this message and i know you will make it work the first p90 you built look beast so i expect this one to work and look even better
Jun 27, 2011. 4:03 AMchevy62 (author)
says:
my computer won't show your other message but i know what you wrote i got the email sweet it is coming along
Jun 27, 2011. 8:47 AMchevy62 (author)
says:
i am on my other computer this one works and i hope you get the firing pin perfect so i don't break the firing pin on every gun i have build they break
| 1-100 of 119 | next » |
 |
