With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
Corolla 2007 ipod radio aux input hack
Aluminum sport X copter frame design for strength, lightwieght, and easy.
You don't need to disconnect the ribbon connector. You can add a line adapter that will convert the headphone output to something similar to the CD input. That way you can still use your CD! Instructions are here...http://www.vwlowen.co.uk/radio/headphone2linein/he...I also added a power line from the AUX power and GND lines so I could power a cheap SD card reader/amplifier so I don't need to plug in my phone every time. Works great!
Extreme Fume Extractor or Fume Hood
I have been looking for a medium to a heavy lift quad for quite sometime. This should fit the bill. What are the largest quad motors that can be used and still give you some decent flight time? I live in the mountains of Colorado and you can see why I would need larger motors. At 9,000 feet the air gets mighty thin and lift goes down..
Extreme fume extractor or fume hood
Walk-in Shelf for the Garage or a SWEET DOG HOUSE!!
dude iTS awesome Pleace do me a fafore, ad an smoke extruder,to your solder tip,next to iT So iTS desmoke iT and attached to the 3D printed housing,( so e sort of tubing)So iT blows out from iT. But you must place a piece of corbonfilter, for the toxics.Good idea or not?
for sombody reply About blowing out, or soWitch direction iT wil blow the smoke to iTS not relevante the corbon wil do iTS Job.Becous This fan is blocking in the iron to prevent heating
but i whas easier with an 12v fan of a pc, so you have a simple conection on the solder irons bord itself.
for sombody reply About blowing out, or soWitch direction iT wil blow the smoke to iTS not relevante the corbon wil do iTS Job.Becous This fan is blowing, in the iron to prevent heating
Super Power Soldering Gun for Continuous Use! Fix Overheating
Removal and Custom Instrument cluster panel toyota corolla 2007 07
How to get the best MPG for your car (list)
Increasing solar cell efficiency
Fix Overheating Soldering Gun for Continuous Use!
Thank you so much for this instructable. I was able to do this with out much effort, mental or physical. I left the CD player unplugged from the radio. I get an error message but the aux in works great. Thanks.
Do you think if I remove the ribbon connector that i will be able to switch to cd mode in order to listen to the aux input ? Because it needs a cd inside the slot to be able to switch to cd mode. Doesn't this signal goes through the ribbon connector also ?
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.