3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Feb 23, 2011
39,486
%14%
%0%
Visit Our Store »
Go Pro Today »
Comment: "I notice you have a somewhat pointy end which I can just imagine a kid poking into the…
Comment: There is always a risk. The lamp I used was just a small 3v light bulb. You could use L…
Comment: Well, if you say so... But working blind and deaf is really frustrating for me.
Comment: I would freak out in pain trying to solve one of these...
Comment: Looks great, but I think it looks more scale if you use tounge depressors (wide sticks)…
Comment: That's sooo sarcastically true! I wish it were the other way around!
Comment: Nice! Just don't forget to post it!
Comment: Hey Jonny,I would say that this could run as a steam engine as well, just connect it to…
Comment: Chaos is inspiring.
Comment: Yes, that's why I didn't write anything about that :)
Comment: Nice :) Don't forget to send me the link to that instructable :)
Comment: Great! I'll send you a patch for doing my knife!
Comment: Hahaha Yes! This is coming up in version two. Thanks for your help!
Comment: Awesome. I've been featured in lot's of places. Not significant places, but still!Just …
Comment: Yep, was going to suggest that you use Led lighting on them!
Comment: They swing over a wooden axle.
Comment: Nice project! Amazing idea! I like how you stay true with the orange portal :)
Comment: That's pretty evil.-1 for Gizmodo.
Comment: My room has changed since. The bed is still the same... Thanks for the feedback!
Comment: Oh, for crying out loud!Yup, I love Stargate too. I've watched 7 seasons of SG-1 too. I…
Comment: I made my own coffee air freshener a bit different, though it looks more awesome!I just…
Comment: I just got the idea to make lighting for under my keyboard, kinda liked underbody car n…
Comment: OK, I got that 5 500Ohm resistors give out 100 ohm when put in parallel. Is this right?…
Comment: Oh, I mean 25.
Comment: According to my cheap clculations from an old physics book, the resistance would be 33 …
Comment: So if i put 4 100ohm pots together with 0.1 W each it would make one 100ohm pot at 0.4W…
Comment: Would this work? What effect would it have?http://i1095.photobucket.com/albums/i472/col…
Comment: Moss is amazing...
Comment: OK, thanks. I'll keep looking.
Comment: ****. Well, I'll keep looking. Can you give me the highest and lowest margins acceptable?
Comment: Hey, what about guitar pots? I think they have lots of those... Are they too high ohms?
Comment: oops, forgot the image...
Comment: Is this a trimpot? It does not state numbers nor capacity. It's mounted on the PCB of a…
Comment: OK, now I understand. Is there any way to increase the wattage capacity, or reduce the …
Comment: yes that was what i was thinking. but what other options do i have? like, what pot coul…
Comment: OK: so i got the LM317T, I got a diode 1n4007, I got 3 x 10ohm resistor, i got the push…
Comment: HEY! What an awesome way to end an instructable!
Comment: LOL Ceviche with shrimp, picudo, albacora, etc really good!
Comment: Yes, the accuracy is what I am referring to. You need a lot of time to do this the "old…
Comment: You would certainly need that t make a frame quickly...
Comment: I want a saw like that...
Comment: Thanks!
Comment: So who won?I got a patch :) Thanks!
Comment: Battousai!
Comment: Hahaha or he just rebuilt the nose part after pulverizing it against the ground...
Comment: Comin' up in the new version!
Comment: Comin' up in the new version!
Comment: Thanks! Im sooooo glad you like it! Thanks for your good wishes! You're just so awesome!
Comment: Short reply to a long comment! LOL
Comment: I built my own classical guitar back when I was 6-7 years old, with the help of a schoo…
Comment: You're right. But I don't have the patience... LOL
Comment: BTW can't you put two potentiometers in series for fine tuning?
Comment: When I do this, I will share it! (that may take some time)
Comment: Thanks!
Comment: OK, I'm new to electronics... My store has LM317L, LM317LZ, LM317T, LM317KWhich is best?
Comment: This one is indeed very sturdy. I dropped it once, 3 ft high, still intact.
Comment: Will my flatscreen plasma work? LOL just kidding!
Comment: LOL Thanks for commenting!
Comment: Thanks!
Comment: It's just a replica... It's not meant to be sharp...
Comment: Yeah! I had one that had a knife, a sandpaper-ish thingy, a couple of tweezers and a to…
Comment: There you go.
Comment: I already did, but haven't uploaded...
Comment: Hahaha LOL
Comment: Nope. You can make three lids, but the fourth wont fit anywhere. Nice play on words, th…
Comment: Cool! I'm happy you like it!
Comment: Yeah basically I could do the same thing with 180 sticks more. You just build a pyramid…
Comment: tissue paper / papel de seda
Comment: You can still do it :)
Comment: I mean when... :S
Comment: Cool! Post a picture of it ejem youre done!
Comment: Congratulations!
Comment: You're welcome.
Comment: http://www.instructables.com/id/Popsicle-Stick-Swiss-Army-Knife-Prop/
Comment: HAHAHA Exactly!
Comment: I see you used LED's... I also was going to but they only shine in one direction... How…
Comment: Cool! You might win!
Comment: I agree. But I had little time...
Comment: I have found a solution to the problem posted above. Please expect it in the Popsicle S…
Comment: BTW, I don't get that glitch...
Comment: Awww, too bad. Since you ask, i'll do a Step by Step. But not right now. I'll let you k…
Comment: Thanks! Feel free to rate it!
Comment: If you don't want to clean it, just make a replacement one with popsicle sticks! http:…
Comment: Así veo...
Comment: You're welcome!
Comment: I envy all your followers, englishman...
Comment: Sure thing bro, Thanks!
Comment: Wonderful clock, duggerpato.
Comment: Can I take it to a jeweler?
Comment: http://www.instructables.com/id/Weekly-Challenge-Popsicle-Sticks-1/
Comment: Enter it in the popsicle stick contest!
Comment: Nope. Maybe if you make it with white glue. But I don't know if the wood will burn up...
Comment: You could use double screens, one of them slidable, you could adjust the amount of ligh…
Comment: I?m EVEN HAPPIER!I got my instructable featured on the homepage!YAAAAAAAAAAAY!!!Thanks …
Comment: Thanks!
Comment: You're awesome! You inspired a huge bunch of people!
Comment: Spray water mist on tissue paper and it will stretch as it dries!But be careful! Just m…
Comment: Cool!
Comment: Good work Jayefuu and Rimar2000!
Comment: They are *goes to measure* 4.5cm x 4.5cm...They are pretty strong, however... since the…
Comment: Honor to your name.
Comment: Thanks!
Comment: YAAAY! I'm Overly Happy! I GOT FEATURED! THANKS!
Comment: I thought you should know that : )
Comment: TIP: When rolling a camera like that, you get noise from the friction. So, get a separa…
Comment: HAHAHA You should come to Ecuador, see what they do with them here!They retrofit them w…
Comment: Wings of second drone look just like thishttp://www.hobbyking.com/hobbyking/store/uh_vi…
Comment: How To Smell Pollutants? Can't stop thinking bout this... http://www.huffingtonpodst.co…
Comment: HAHAHA LOL
Comment: You could shoot it with a homemade air pressure rifle. It would fly straight like crazy
Comment: Thanks!
Comment: http://cgi.ebay.com/Power-Dock-Charger-Base-Cradle-fr-ipod-Touch-3G-4G-32GB-/2806510704…
Comment: Yeahhh! The Matrix!
Comment: Dude you blew my head off with that!
Comment: '''test'''
Comment: ~~TEST~~
Comment: WOW! You're awesome!
Comment: Congratulations on an excellent photo! (the first one)
Comment: Ok. Seems like fresnel lenses are only to project light, I read somewhere on the Intern…
Comment: I used my 1G PNY flash drive like that for a year... And I removed the case because I s…
Comment: Dude you have the same router as I. Mine also gets hot... It's a WRT150N... :)
Comment: Verga, I have been considering prices for plywood... Yes I am going to build a boat. I …
Comment: Are YOU questioning me? Not that I am anyone of importance, but this discussion ended a…
Comment: You can make a pneumatic (air) rifle to shoot them. Search Instructables.
Comment: And so I'm in Ecuador trying to get these CCFLs that run on a molex plug (for my case),…
Comment: Sorry, but in Ecuador people (kids) have been using plastic bags for ages. They also us…
Comment: this was my idea!
Comment: Well some people would use them for other uses where only a fully open and a fully clos…
Comment: Yeah the guy made a mistake in the activator. The slots should go the other way.
Comment: NSF means MDF with iPods spellcheck LOL
Comment: My make has only six blades, which means that if you have a 10 cm opening, the edge whe…
Comment: After contemplation I realized that this iris won't shut completely, (dissappointing)bu…
Comment: You're just like me! As soon as you recieve a comment you feel the need to reply, even …
Comment: Ok but ill make it bigger.
Comment: Yeah this page is real cool! I've also started to put stuff together after opening them…
Comment: O_o arduino was a new word for me when I entered instructables. I only know it's about …
Comment: About the patch contest, can i design my own iris?I have an idea for a six blade iris. …
Comment: http://brassgoggles.co.uk/forum/index.php?topic=1530.0More info
Comment: Ok! THANKS! I will!Of what subjects are you a master? I mean what are you good at? I am…
Comment: On monday I'll start. I hope no one reads this. But what is a patch?
Comment: Ok! I'll ask for a fresnel lens then. The guys that work with stage lighting should kno…
Comment: Once I tried to make something like this. I was experimenting with lenses and mirrors b…
Comment: Thanks! :)
Comment: Well, I wasn't actually planning to do it but now that you mention it, I have a lot of …
Comment: Well, basically when I saw this It reminded me of the stargate, and of the iris. That's…
Comment: XD
Comment: Yeah that's why it's made of titanium... They actually made a new iris for the Stargate…
Comment: As you wish. It means youre not latin. If you were, I would have reported you... By the…
Comment: Do you know what your username means in ecuadorian spanish?
Comment: Ok, now make it 4 meters in diameter and in solid titanium and place it in front of you…
Comment: You're welcome!Also, cool idea!
Comment: You've got a typographic error! 2nd-3d linewill being games on it will be playing gam…
Comment: LOL You're welcome!
Comment: Hey dudeI got 18 AXE cans saved for inventions. I would prefer using the original spray…
Comment: Duh! I can see someone spraying their armpits with black paint! LOL
Comment: HAHAHA LOL
Comment: HAHAHAYou just gave me one hundred and six ideas!LOL AWESOME
Comment: Thanks! I appreciate your comment!You can click on my name and check the Instructable f…
Comment: Yeah, and I really like your mouse! I want one!
Comment: Cool
Comment: BTWI'm not the first one to come up with this, though I did come up with it myself... :)
Comment: Thanks! Oh, is your avatar from Cyanide & Happiness?
Comment: Yeah Exactly!I have survived two small earthquakes (3.4 and 4.1)Thanks for commenting!