diode_tensegrity
- Date Joined:Jun 26, 2006
- Instructables:1
- Total Views:10,648
- Subscribers:2
- Comments:9
Instructables 
Patches
diode_tensegrity has not received any patches yet... send diode_tensegrity a patch!
Questions
Comments
» A 5 amp hour battery + 20 watt draw at 12 volts run time? It's drawing 1.7 amps. I'd sa…
» As a way to protect the tubes, you can mount the tubes inside square acrylic tube. I di…
» 50 watts....that should light up the road pretty well. The most I've done so far is 20 …
» You could certainly replace the light with LED's but there lies the rub. If you use hig…
» Las Vegas, You don't say why that's true. The switch has an internal light which tur…
» Ditto Alibre-Rob's comment. How can you unpublish an Instructable that went on-line bef…
» I tried using a conduit bender I have but the curves are too big. I then tried using a …
» LED's are part of the description. I couldn't afford enough LED's to cover the whole bo…
» I just realized from surfing this site that I could use carbon steel instead of galvani…
» As a way to protect the tubes, you can mount the tubes inside square acrylic tube. I di…
» 50 watts....that should light up the road pretty well. The most I've done so far is 20 …
» You could certainly replace the light with LED's but there lies the rub. If you use hig…
» Las Vegas, You don't say why that's true. The switch has an internal light which tur…
» Ditto Alibre-Rob's comment. How can you unpublish an Instructable that went on-line bef…
» I tried using a conduit bender I have but the curves are too big. I then tried using a …
» LED's are part of the description. I couldn't afford enough LED's to cover the whole bo…
» I just realized from surfing this site that I could use carbon steel instead of galvani…
Favorites
Groups
Orangeboard
1
comment
|
Add Comment
|
Thanks for sharing your project, and welcome to Instructables!
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't see these, here's a guided tour of Instructables and an Instructable for making Instructables.
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't see these, here's a guided tour of Instructables and an Instructable for making Instructables.
 |
