With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Knex H&K G3 Instructions
K'nex SCAR-L instructions
K'nex DSR-1 instructions
Steyr AUG A2 instructions
K'nex HK13e instructions
wanneer komt die instructie nou eigenlijk
It has nothing to do with physics, like that guy said. You'll have to modify your boosters by cutting some parts of the orange housing off, like Burrito said in the comments hereHere's a quick video on it.I don't have any SS style roller coasters myself, so I'm afraid I can't help any further, but I hope this information can be of use to you~
Lever Action Rubberband Gun - Instructions
It's... not that good, to be honest.I don't know if you use this to shoot stuff, but if you do, those arms aren't going to work. They'll either break off, or the green rods will bend way too much, which results in losing energy.Second, the body. With only one layer of connectors, it'll start bending under pressure. You can get away with a three layer body, if you add another row of connectors underneath. It might twist a bit, but at least it won't bend vertically.Third, that handle. It looks flimsy and uncomfortable. Look around a bit, there's loads of handles you can attach to it, even a standard 45 degrees handle would be better than the stick it has now.As for the stock, that's really up to you, as large stocks are almost only a piece hog. Anyway, try to learn from what has already been posted, and just keep building.
Awesome gun! I am planning on probably building this today. How far does it shoot?
Knex Drum Magazine
This... is not a gun.It doesn't have a trigger, or any firing mechanism for that matter.If you flick it too hard, the handle will break off.I'd say, look around a bit, see what k'nex is capable of, and learn from that.
Ah, sure, go ahead~
Do you mind if I use this mag concept in one of my K'NEX guns and post it? I'd give you credit.
build the thing i asked o:
It looks like any other handle fed k'nex pistol without the side panels, but that's just the fault of this set-up.But hey, it resembles the PPK, so that's fine.
>built TheKnexChicken styleIsn't it kind of built like any other handle-fed pistol, but with some additional plates on it?Anyway, it looks fine, and the instructions are decent enought.
I did, but other hobbies, work and stuff...
oh no you don't xoxo <3
hij is nog steeds niet geupload, even een vraagje: hoe lang duurt het nog??
Those lines! Very smooth.
>considering that you designed them all yourselfNnnot exactly:- The M14 and Kap-40 (first column, first and second from top) were originally made by the Red Book of Westmarch;- The C.A.R. (first column, fourth from top) was made by me;- The PPSH (second column, second from top) was made by Blue Mullet;- The Peacekeeper (second column, center) was made by me;- The PM Rak (second column, fourth from top) was made by tRBoW;- The Thompson (third coloum, first from top) was made by Rofl495;- The Python (third column, third from top) was made by Blue Mullet;- The Dragunov (third column, fourth from top) was made by tRBoW;- The 1911 (third column, bottom) was made by Cazadactle.Zombie changed some small things, and left out shooting functions, but he didn't design most of them himself. No offence towards Zombie intended.
SD Turret Rifle instructions
I'm afraid you'll need a few more of them. The ones in the magazine can be replaced by green rods in the circular holes, with tape around them.If you leave the hinges near the magwell away, you should be able to replace the broken rods there with normal white ones.The trigger can be an orange connector with a green rod through the circular hole, which should save you another one.I'm not sure about the rest, I haven't had this gun assembled since this ible, so I looked over the instructions.Hope this helped.
question,how many cut parts does this need? I only have two white rods without the ends on them and I want to build this.
K'nex Magpul PDR Instructions
ik snap het best als je het druk hebt. maar het is al een tijdje geleden dat je hebt gezegd dat je deze pdr opnieuw zou maken. niet dat ik je onder druk wil zetten of zo hoor. maar ik zet er met smart op te wachten en hoop dat het niet lang meer duurt
knex mp-40 intsructions
A failed attempt at a K'nex Sydney Sleeper
Lever action rubberband gun
Steyr AUG A2
K'nex FAMAS G2 Instructions:
Some recent k'nex guns I've made
K'nex Steyr TMP instructions
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.