drcrash
- Date Joined:Jan 19, 2007
- Instructables:3
- Total Views:545,423
- Featured %:100%
- Subscribers:62
- Comments:204
Instructables 
Patches
drcrash has not received any patches yet... send drcrash a patch!
Comments 1-10 of 195(view all)
» Regular-set alginate sets in a very few minutes, especially if you don't use cold water…
» The copolyester I'm familiar with is PETG copolyester; that is, the same thing as PETG…
» There are already several Instructables on how to convert an ATX computer power supply …
» Yes, your question was an excellent one. Unfortunately, I'm not a laser guy and don'…
» I'm thinking this is very dangerous without excellent near-IR filtering goggles. A 1…
» Most model train transformers can't do the amps for this, and will cut out on you. Som…
» That depends on what you mean by 3D. Pretty much everything you'd vacuum form is 3D, s…
» Craft foam is not very tough or strong. It's something like 90 percent air. You would…
» Fourthed---and flagged.
» Nice.You can also vacuum form craft foam pretty easily, to get compound curves and fair…
» The copolyester I'm familiar with is PETG copolyester; that is, the same thing as PETG…
» There are already several Instructables on how to convert an ATX computer power supply …
» Yes, your question was an excellent one. Unfortunately, I'm not a laser guy and don'…
» I'm thinking this is very dangerous without excellent near-IR filtering goggles. A 1…
» Most model train transformers can't do the amps for this, and will cut out on you. Som…
» That depends on what you mean by 3D. Pretty much everything you'd vacuum form is 3D, s…
» Craft foam is not very tough or strong. It's something like 90 percent air. You would…
» Fourthed---and flagged.
» Nice.You can also vacuum form craft foam pretty easily, to get compound curves and fair…
Favorites
Groups
Orangeboard
1
comment
|
Add Comment
|
Thanks for sharing your project, and welcome to Instructables!
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't seen these, here's a guided tour of Instructables and an Instructable for making Instructables.
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't seen these, here's a guided tour of Instructables and an Instructable for making Instructables.
 |
