fraganator
- Date Joined:Jan 5, 2011
- Instructables:1
- Total Views:55,084
- Featured %:100%
- Subscribers:29
- Answers:1
- Comments:66
Instructables 
Patches
from
MichelMoermans
Comments 1-10 of 66(view all)
» The datasheet for the slider looks to have been updated, and the dimensions match up wi…
» The intermittent MIDI messages you're seeing is most likely the result of floating anal…
» Hi apefive, The design looks good. You will have to tweak a few lines of the sketch to…
» I don't have access to OSX at the moment, so I can't comment on what the exact incoming…
» The controller simply sends MIDI messages to audio software running on a computer. The …
» A standard 1/4 watt resistor will be fine.
» The board used in this project is an Arduino, which has a development environment also …
» The code should already support the Arduino Mega boards, though it's untested as I don'…
» Adding shift registers shouldn't be too hard code wise. The Arduino library includes sh…
» At the top of the code there are a number of #defines for each MIDI control message (eg…
» The intermittent MIDI messages you're seeing is most likely the result of floating anal…
» Hi apefive, The design looks good. You will have to tweak a few lines of the sketch to…
» I don't have access to OSX at the moment, so I can't comment on what the exact incoming…
» The controller simply sends MIDI messages to audio software running on a computer. The …
» A standard 1/4 watt resistor will be fine.
» The board used in this project is an Arduino, which has a development environment also …
» The code should already support the Arduino Mega boards, though it's untested as I don'…
» Adding shift registers shouldn't be too hard code wise. The Arduino library includes sh…
» At the top of the code there are a number of #defines for each MIDI control message (eg…
Orangeboard
5
comments
|
Add Comment
|
Jul 31, 2011. 2:34 AMheadsdeep
says:
did you check out my pics you deff made these things happen
with your mind sorta like telecinesis
if i connected a led to a pot the same way you discribed
for button, ould said led fade in and out as the pot was used?
or should i just try it?
with your mind sorta like telecinesis
if i connected a led to a pot the same way you discribed
for button, ould said led fade in and out as the pot was used?
or should i just try it?
Jul 31, 2011. 9:10 AMfraganator (author)
says:
Is the pic you're referring to the modded double neck guitar in your profile? Excellent stuff!
If you connect an LED to the wiper pin of the pot, it will fade in brightness relative to the changing resistance of the pot. Don't take my word for it though, try it out! Remember to put a resistor in series with the LED to limit the current travelling through it when the pot is turned to it's minimum resistance.
If you connect an LED to the wiper pin of the pot, it will fade in brightness relative to the changing resistance of the pot. Don't take my word for it though, try it out! Remember to put a resistor in series with the LED to limit the current travelling through it when the pot is turned to it's minimum resistance.
Feb 24, 2011. 11:12 AMDirektor
says:
Hi...are possible for your insert in your project one rotary encoder (example one simple rotary encoder whitout stop micro sfere)??thanks
 |
