gamnoparts
- Date Joined:Nov 10, 2008
- Instructables:1
- Total Views:17,495
- Featured %:100%
- Subscribers:2
- Answers:2
- Best Answers %:50%
- Comments:54
Instructables 
Achievements
Patches
gamnoparts has not received any patches yet... send gamnoparts a patch!
Questions
Do LED's need to be mounted to a circuit board, or can they be attached in some way to a tube of some sort? Asked in Technology 5 days ago Answers: 5 |
Best Answers
Comments 1-10 of 52(view all)
» Nice job! I'm currently knee deep in converting a 250 gallon propane tank into a giant …
» Nice. I just watched a video a cpl days ago from dodocase walking you through how they …
» Nice ible. When you get ready to drill out the center, find a bit that is pretty close…
» Nice job, and excellent ible. I've worked in 100 sq ft shops & 18,000 sq ft shops and I…
» I think 3 would do it. Just take your jig and use all 3 holes, if the widths are the sa…
» If you put a few spots of wood glue in each hole when you dowel them together, the dowe…
» I'm curious why you used the plates to connect your end pieces, but went through the ad…
» Those are all valid points. Points that I agree should be considered ESPECIALLY if you…
» I've done plenty of welding on galvanized material, & we never ground it out, but it do…
» I like the idea, but I'm not sure exactly how to apply it. If it were tethered w/ a ca…
» Nice. I just watched a video a cpl days ago from dodocase walking you through how they …
» Nice ible. When you get ready to drill out the center, find a bit that is pretty close…
» Nice job, and excellent ible. I've worked in 100 sq ft shops & 18,000 sq ft shops and I…
» I think 3 would do it. Just take your jig and use all 3 holes, if the widths are the sa…
» If you put a few spots of wood glue in each hole when you dowel them together, the dowe…
» I'm curious why you used the plates to connect your end pieces, but went through the ad…
» Those are all valid points. Points that I agree should be considered ESPECIALLY if you…
» I've done plenty of welding on galvanized material, & we never ground it out, but it do…
» I like the idea, but I'm not sure exactly how to apply it. If it were tethered w/ a ca…
