With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
Wooden Digital Clock
How to Build a DIY Micro Camper
Why tape the cut parts back on and cut them out again?
That looks great, how much weight will it hold?
Simple and effective. Looks good!Do you use a roundover bit or do you hand sand all of that??
Looks great!What kind of mobile work table is that?
Brewing Cuban Coffee
I really want to try this!
First, good effort on the lights, it looks very effective.Second, please nobody else make one of these in this manner, it's a fire hazard. All of that wire should at the very least be romex (house wire) and all of the splices inside of junction boxes. Also, those sockets are not designed to be installed in wood like that.Not trying to be a Debbie Downer, I'm always a fan of people making everything that they can, but it's not safe in the least bit. If you'd like some assistance designing a safe setup let me know and we'll exchange email address.
Looks like a fun project, good job!
Do you have a preferred source for inexpensive epoxy in large quantities?
Good job.....and without power tools!!
How to Make Stabilized Whipped Cream Frosting
Can't get any simpler than that!
Could you please post pictures of the underside of your vise? I'd love to see how you have it mounted and how it works.
Awesome build, awesome instructable!
Can you post a video of the vice in action?
Folding Portable Workbench With Quick Release Vise
Quick, Cheap, and Easy Benchdogs
That looks really nice! Is it functional for wiping off feet? Slippery when wet?
Black Bottom Cupcakes
What program did you use to make the plans?
Rusty Modern Thrifted Table
The Ski Sled
This is fantastic! Great job!What does "Darbin Orvar" mean?
You could make the base 1/8 inch wider all the way around and you'd never worry about it . Or, you could make it about a half-inch wide and use a router around it to give it a decorative edge yet still flush with the concrete where it meets it.
Concrete and Wood Door Stop
Build a Wooden Grog From Scraps!
Make Coca Cola Soda Fountain Dispenser Machine at Your Home Fridge !
Some good tips there, be careful spraying them on fabrics like your shoes..... Unless you don't mind smelling like wd-40 everywhere you go.
DIY Hot Wire Foam Cutter
That looks great! What is the height of the bench?
Pretty neat! Next up is to design an inline battery holder so that the batteries can be easily changed out.I see a soldering iron in your near future!
Letter Opener Made From Junk Mail
Awesome job, might do one of these for fun
Bent Veneer Wood Lamp
Post up a video of you using that setup on a real project.
That looks great! Well done.
Create Perfect Dados With This Router Jig
How do you like the magnetic hardware? Does it ever shift out of place?
Definitely A.It looks much nicer without the inserts....very clean, classy.
Easy DIY Downdraft / Sanding Table
Thank you, but I meant for you. You mentioned that the leaf blower bag that you are currently using lets out a little more dust than you'd like. I was suggesting that if you adapted your setup to use a shop-vac bag instead, it would contain more of the dust.
Great idea and nice instructable! maybe you could try making an adapter to use a shop-vac bag for the dust collection.
That's not fixing anything, it's rigging it up. That's a beautiful hardware set, do it right!!
Router Circle Jig Edge Guide
Adjustable Router Guide Template
'Corn Flake' Potatoes
Drill Press Table and Fence
Does this sculpture represent anything in particular to you?
Easy Gold and Stormy Cocktail
Not working for me on my mobile.
How to make a bulb light up without wires - Tesla Coil
So is the floor perfectly smooth, or textured from the pennies?I really like this.
The shelf looks much better like that, that back gap would drive me nuts!Wouldn't it be easier to just cut off the top of the back bracket so that the shelf would slide all the way against the wall?
Simple and pretty cool!
Origami Heart Bookmark
Rustic Epoxy Heart Key Hanger
Spicy Chicken, Squash and Tomatoes
How to Make the Best Red Velvet Cheesecake Swirl Brownies
How to Etch Copper (+DIY Etchant, Alternative to Ferric Chloride)
What does it look like from inside of the cabinet?
do the shelves replace the plastic shelves?
It looks pretty neat, but what does it look like from inside of the cabinet??
Candy Pooping Reindeer
Looks great I bet it's a beast.I am stumped by one thing, though. Where's the beer? All I see is a can of water ?
How to Make Apple Roses
Very creative for a bender that is just for making random projects. Thanks for sharing!
Great work, very thoughtful of you!
Thanks! For the longest time I wondered how those scream queens did it in the old cheesy horror movies. Mystery solved!
Very neat, thanks for sharing!
So what does your finished product look like? Pictures please!!
Turn Your Smartphone Into a 3D Hologram Projector! Does It Work?
Metalic Chess Set From Scrach
How to Brew the Perfect Cup of Coffee
Making a Wooden Ring Box
DIY CNC for Less of 160€ With Arduino
Looks great, nice work!
How to make an AC line detector
Cheap and easy catapult for Hot Wheels style toy cars
Bluetooth Multi-Color Table Lamp
SOFT & CHEWY CHOCOLATE CHUNK (CHIP) COOKIES
Holiday Chocolate Fudge
The First 3D Printed Prosthetic Stretched Lobe
What would you charge to make just the pieces with printer?
The shrimp is already cooked.
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.