http://www.instructables.com Member Feed Fri, 24 May 2013 01:25:11 PDT BLOX v1.01 http://www.instructables.com/id/The-Valve-Caster-20-Tube-Boost-and-Overdrive/
The Valve Caster 2.0: Tube Boost and Overdrive - More DIY How To Projects]]> /files/deriv/F5O/U1MP/H742YTVE/F5OU1MPH742YTVE.SQUARE2.jpg /files/deriv/F5O/U1MP/H742YTVE/F5OU1MPH742YTVE.SQUARE.jpg /files/deriv/F5O/U1MP/H742YTVE/F5OU1MPH742YTVE.SMALL.jpg E0TTREIH73WSA6D Teslaling This is a little tube boost pedal for your guitar amp. It is a two mode effect that adds some tube sound to your guitar. The first mode is a boost. It adds some overdrive and tube compression along with boosting the signal. The second mode adds a second tube that provides much more overdrive.  The p...
By: Teslaling

Continue Reading »]]> technology Tue, 18 Sep 2012 02:37:05 PDT The-Valve-Caster-20-Tube-Boost-and-Overdrive http://www.instructables.com/id/Making-Blocks-out-of-HDPE-milk-jugs/ /files/deriv/FWH/KP9A/GKS0TCFW/FWHKP9AGKS0TCFW.SQUARE2.jpg /files/deriv/FWH/KP9A/GKS0TCFW/FWHKP9AGKS0TCFW.SQUARE.jpg /files/deriv/FWH/KP9A/GKS0TCFW/FWHKP9AGKS0TCFW.SMALL.jpg E74DNK3GKS0QPNQ mfoster   This is a brief explanation of the process that I have used to reuse one gallon HDPE ( recycling #2) milk jugs. There are plenty of FAQs documenting HDPE sheet welding for fabric and vacuum forming sheet stock, but I couldn't find anything on forming solid blocks. I was looking for an inexpensive ...
By: mfoster

Continue Reading »]]> technology Mon, 11 Apr 2011 11:30:04 PDT Making-Blocks-out-of-HDPE-milk-jugs http://www.instructables.com/id/Make-and-Install-Custom-Eyelets/
Make and Install Custom Eyelets - More DIY How To Projects]]> /files/deriv/FW2/07V5/GZAD16R3/FW207V5GZAD16R3.SQUARE2.jpg /files/deriv/FW2/07V5/GZAD16R3/FW207V5GZAD16R3.SQUARE.jpg /files/deriv/FW2/07V5/GZAD16R3/FW207V5GZAD16R3.SMALL.jpg EHJMRP9GZ6I5MPO KrushIndustries I did this project at Techshop Detroit. Not all of these tools are provided by the shop, but I certianly would not have been able to pull this off very easily without the shop. The link to the website is here: www.techshop.ws Check out my last instructable about how to make a custom guitar amp mot...
By: KrushIndustries

Continue Reading »]]> living Fri, 2 Mar 2012 22:30:02 PST Make-and-Install-Custom-Eyelets http://www.instructables.com/id/How-to-perfectly-clean-wires-in-minutes/ /files/deriv/FH7/ZTX8/GLE1IAPI/FH7ZTX8GLE1IAPI.SQUARE2.jpg /files/deriv/FH7/ZTX8/GLE1IAPI/FH7ZTX8GLE1IAPI.SQUARE.jpg /files/deriv/FH7/ZTX8/GLE1IAPI/FH7ZTX8GLE1IAPI.SMALL.jpg EY5IOCJGLE1IAKQ solomonhorses Here is an old ham radio operators trick for cleaning wires for soldering that are old and corroded.  It is hard to find this technique printed anywhere! I am a ham, NH7ZE, and learned it from my elmer (mentor). I am passing it on.  I hope it helps people who need to clean wires:P Please vote!!! No...
By: solomonhorses

Continue Reading »]]> technology Thu, 17 Mar 2011 15:30:02 PDT How-to-perfectly-clean-wires-in-minutes http://www.instructables.com/id/Building-a-Gypsy-Wagon/
Building a Gypsy Wagon - More DIY How To Projects]]> /files/deriv/FHW/0EAP/GUQ4G63Z/FHW0EAPGUQ4G63Z.SQUARE2.jpg /files/deriv/FHW/0EAP/GUQ4G63Z/FHW0EAPGUQ4G63Z.SQUARE.jpg /files/deriv/FHW/0EAP/GUQ4G63Z/FHW0EAPGUQ4G63Z.SMALL.jpg E77M4BMGERP8NZU paleotool For many years I have been interested in Gypsy Wagons or "vardos" and western sheepherder wagons. As it isn't practical for me to have an authentic, horse-drawn lifestyle I decided to make a version towable at highway speeds. After reading just about every book I could find on wagons, caravans, old-...
By: paleotool

Continue Reading »]]> workshop Fri, 11 Nov 2011 05:00:03 PST Building-a-Gypsy-Wagon http://www.instructables.com/id/8-Folding-Kayak/
8' Folding Kayak - More DIY How To Projects]]> /files/deriv/FRK/2RVR/GDPPMAUS/FRK2RVRGDPPMAUS.SQUARE2.jpg /files/deriv/FRK/2RVR/GDPPMAUS/FRK2RVRGDPPMAUS.SQUARE.jpg /files/deriv/FRK/2RVR/GDPPMAUS/FRK2RVRGDPPMAUS.SMALL.jpg EJKP3VWGC4GD49L wizgirl I made an 8' Folding Kayak for around $100 based on plans by Jess E. Rathburn originally published in Popular Mechanics in 1963. The plans have been modified by multiple people and instructions are available online for free in various locations: http://www.vintageprojects.com/boats/folding-kayak....
By: wizgirl

Continue Reading »]]> outside Thu, 17 Mar 2011 19:00:25 PDT 8-Folding-Kayak http://www.instructables.com/id/Building-a-One-sheet-boat/
Building a One sheet boat - More DIY How To Projects]]> http://cdn.instructables.com/FPW/X2ZC/GCJ0YB4H/FPWX2ZCGCJ0YB4H.SQUARE2.jpg http://cdn.instructables.com/FPW/X2ZC/GCJ0YB4H/FPWX2ZCGCJ0YB4H.SQUARE.jpg http://cdn.instructables.com/FPW/X2ZC/GCJ0YB4H/FPWX2ZCGCJ0YB4H.SMALL.jpg EFMDXNKGC4GCPAR Verga Warning: Woodworking is inherently dangerous. You are using sharp tools some of them spinning at large RPM's. You need to be wearing eye protection at all times, hearing protection as needed and because you are going to be working on some very small pieces you must use a push stick. Niether I or Ins...
By: Verga

Continue Reading »]]> outside Sat, 23 Jul 2011 13:30:05 PDT Building-a-One-sheet-boat http://www.instructables.com/id/Connecting-Nokia-3310-LCD-to-USB-using-AVR/
Connecting Nokia 3310 LCD to USB using AVR - More DIY How To Projects]]> /files/deriv/FZR/F90G/GB3W24JS/FZRF90GGB3W24JS.SQUARE2.jpg /files/deriv/FZR/F90G/GB3W24JS/FZRF90GGB3W24JS.SQUARE.jpg /files/deriv/FZR/F90G/GB3W24JS/FZRF90GGB3W24JS.SMALL.jpg EB51PEAGAPUREEB wkter What do you do with an old phone, a microcontroller and lots of time? You hook the old phone's LCD screen to the computer USB of course! In this project we're going to communicate with a Nokia 3310 LCD display over USB! How are we going to do that? We're going to connect the LCD display to an Atmel...
By: wkter

Continue Reading »]]> technology Thu, 2 Jun 2011 15:30:04 PDT Connecting-Nokia-3310-LCD-to-USB-using-AVR http://www.instructables.com/id/How-to-etch-aluminum-panel-labelsdesigns-with-a-r/
How to etch aluminum panel labels/designs with a reusable acid mix - More DIY How To Projects]]> /files/deriv/FIU/9KSG/FKD1LKM9/FIU9KSGFKD1LKM9.SQUARE2.jpg /files/deriv/FIU/9KSG/FKD1LKM9/FIU9KSGFKD1LKM9.SQUARE.jpg /files/deriv/FIU/9KSG/FKD1LKM9/FIU9KSGFKD1LKM9.SMALL.jpg ES14VVQFKD1LKNW sineSurfer This tutorial will show you how to etch your own designs/labels into aluminum panels with a reusable acid mix instead of using electricity(the most common method).It's a pretty good and cheaper alternative to profesional made panels for your home made synths, stomp boxes, etc. :)As with any work inv...
By: sineSurfer

Continue Reading »]]> workshop Fri, 18 Mar 2011 01:00:35 PDT How-to-etch-aluminum-panel-labelsdesigns-with-a-r http://www.instructables.com/id/The-Ambience-Enhancer/
The Ambience Enhancer - More DIY How To Projects]]> /files/deriv/FJH/BIB1/FA0CVBBY/FJHBIB1FA0CVBBY.SQUARE2.jpg /files/deriv/FJH/BIB1/FA0CVBBY/FJHBIB1FA0CVBBY.SQUARE.jpg /files/deriv/FJH/BIB1/FA0CVBBY/FJHBIB1FA0CVBBY.SMALL.jpg E7L16Z8FA0CVBC2 Porkshanks "This handy little device can take the most boring and dull locale and turn it into whatever sort of emotive resonance you prefer! You simply load it with "Wave Files" or their less complicated cousins the "Musical Programme Type Threes (or "MP3" for those who enjoy abbreviations) and then activate ...
By: Porkshanks

Continue Reading »]]> technology Fri, 18 Mar 2011 02:31:16 PDT The-Ambience-Enhancer http://www.instructables.com/id/Guitar-FX-Finishing-your-FX-project-boxes/
Guitar FX - Finishing your FX project boxes. - More DIY How To Projects]]> /files/deriv/F9X/4N4Z/FTNHEJUE/F9X4N4ZFTNHEJUE.SQUARE2.jpg /files/deriv/F9X/4N4Z/FTNHEJUE/F9X4N4ZFTNHEJUE.SQUARE.jpg /files/deriv/F9X/4N4Z/FTNHEJUE/F9X4N4ZFTNHEJUE.SMALL.jpg EPCYLMZFTNHEJVM doommeister In this instructable the DoomMeister will show you how can finish your project boxes for FX units in a professional looking way. These instructions can of course be used for finishing any type of project box.The circuit that this particular box is intended to house is the Dr Quack an envelope filter...
By: doommeister

Continue Reading »]]> play Sun, 8 May 2011 08:00:09 PDT Guitar-FX-Finishing-your-FX-project-boxes http://www.instructables.com/id/Cardboard-shelf-for-groceries/
Designing Cardboard Furniture - More DIY How To Projects]]> /files/deriv/FHX/KYP6/FOVX10TS/FHXKYP6FOVX10TS.SQUARE2.jpg /files/deriv/FHX/KYP6/FOVX10TS/FHXKYP6FOVX10TS.SQUARE.jpg /files/deriv/FHX/KYP6/FOVX10TS/FHXKYP6FOVX10TS.SMALL.jpg E625052FFJYNVFF Scriptone Create more spaces that weren't there before, save a tonne by creating you're own furniture out of cardboard and watercolour tape. You'll find several nifty tricks and tips here and in following instructables about how to design your own cardboard furniture. Some pieces can be completed in a day o...
By: Scriptone

Continue Reading »]]> workshop Tue, 11 Oct 2011 19:30:46 PDT Cardboard-shelf-for-groceries http://www.instructables.com/id/How-to-Make-Anything-Using-Acrylic-and-Machine-Sc/
How to Make Anything (Using Acrylic and Machine Screws) - More DIY How To Projects]]> /files/deriv/F5Q/NZO9/FRIQ7FDO/F5QNZO9FRIQ7FDO.SQUARE2.jpg /files/deriv/F5Q/NZO9/FRIQ7FDO/F5QNZO9FRIQ7FDO.SQUARE.jpg /files/deriv/F5Q/NZO9/FRIQ7FDO/F5QNZO9FRIQ7FDO.SMALL.jpg E0V1503FRIQ7FDF oomlout Well maybe not anything, but what follows is an Instructable about how we at oomlout.com build everything we produce.It is a technique we call Interlocking T-Bolt Construction. It consists of a T-cutout in one piece of acrylic (or any 3 mm stock) and a receptacle in another piece. These pieces can t...
By: oomlout

Continue Reading »]]> technology Sat, 19 Mar 2011 21:00:32 PDT How-to-Make-Anything-Using-Acrylic-and-Machine-Sc http://www.instructables.com/id/RFID-Reader-Detector-and-Tilt-Sensitive-RFID-Tag/
RFID Reader Detector and Tilt-Sensitive RFID Tag - More DIY How To Projects]]> /files/deriv/FCI/YZG9/FN4A5KYE/FCIYZG9FN4A5KYE.SQUARE2.jpg /files/deriv/FCI/YZG9/FN4A5KYE/FCIYZG9FN4A5KYE.SQUARE.jpg /files/deriv/FCI/YZG9/FN4A5KYE/FCIYZG9FN4A5KYE.SMALL.jpg E4P3OGLFMSGH2PL nmarquardt The 'rub'Want to detect the presence of RFID readers? Want to control when a RFID tag is active or readable? We describe how to do both using bits of copper and card, and some readily available electronics hardware.Longer preambleRadio frequency identification ( RFID) is rapidly growing in populari...
By: nmarquardt

Continue Reading »]]> technology Thu, 17 Mar 2011 22:31:04 PDT RFID-Reader-Detector-and-Tilt-Sensitive-RFID-Tag http://www.instructables.com/id/Instructables-Text-Formatting/
Instructables Text Formatting - More DIY How To Projects]]> /files/deriv/FCU/VQLE/FPKFCVDS/FCUVQLEFPKFCVDS.SQUARE2.jpg /files/deriv/FCU/VQLE/FPKFCVDS/FCUVQLEFPKFCVDS.SQUARE.jpg /files/deriv/FCU/VQLE/FPKFCVDS/FCUVQLEFPKFCVDS.SMALL.jpg EK7XLYTF905443Y NachoMahma .  This iBle was obsoleted by the introduction of the new editor in early 2010. The information here no longer applies at Instructables.
By: NachoMahma

Continue Reading »]]> technology Tue, 24 May 2011 01:30:50 PDT Instructables-Text-Formatting http://www.instructables.com/id/Styrofoam-Plate-Speaker/
Styrofoam Plate Speaker - More DIY How To Projects]]> /files/deriv/FOY/9HXV/FIRR5JZY/FOY9HXVFIRR5JZY.SQUARE2.jpg /files/deriv/FOY/9HXV/FIRR5JZY/FOY9HXVFIRR5JZY.SQUARE.jpg /files/deriv/FOY/9HXV/FIRR5JZY/FOY9HXVFIRR5JZY.SMALL.jpg EGAC4BRFIRR5K02 Kipkay Get surprisingly good results from disposable picnicware! Turn an ordinary styrofoam plate into a decent sounding speaker. Original project design from Jose Pino. See the Test Results in the video.
By: Kipkay

Continue Reading »]]> technology Wed, 23 Mar 2011 05:30:13 PDT Styrofoam-Plate-Speaker http://www.instructables.com/id/Build-a-60-Watt-Solar-Panel/
Build a 60 Watt Solar Panel - More DIY How To Projects]]> /files/deriv/FI3/EALB/FKX1AIAF/FI3EALBFKX1AIAF.SQUARE2.jpg /files/deriv/FI3/EALB/FKX1AIAF/FI3EALBFKX1AIAF.SQUARE.jpg /files/deriv/FI3/EALB/FKX1AIAF/FI3EALBFKX1AIAF.SMALL.jpg ECPNAXSFKX1AIBI mdavis19 Several years ago I bought some remote property in Arizona. I am an astronomer and wanted a place to practice my hobby far away from the terrible light pollution found near cities of any real size. I found a great piece of property. The problem is, it's so remote that there is no electric service av...
By: mdavis19

Continue Reading »]]> workshop Thu, 17 Mar 2011 23:00:56 PDT Build-a-60-Watt-Solar-Panel http://www.instructables.com/id/CozyBoatSkin/
Cozy Boat Episode 2: A New Skin - More DIY How To Projects]]> /files/deriv/F1Z/7R21/FG9OH4X9/F1Z7R21FG9OH4X9.SQUARE2.jpg /files/deriv/F1Z/7R21/FG9OH4X9/F1Z7R21FG9OH4X9.SQUARE.jpg /files/deriv/F1Z/7R21/FG9OH4X9/F1Z7R21FG9OH4X9.SMALL.jpg EDQ2J97FG9OH4Y7 TimAnderson The Cozy Boat finally needed a new skin.Seagull poop ate holes in the cotton denim skin. Then the seagulls pecked at the holes to see if it had tasty guts. They pecked right through the closed cell foam layer. Now you couldn't use the boat at all without getting a wet butt.Ray and Chloe volunteered...
By: TimAnderson

Continue Reading »]]> outside Wed, 23 Mar 2011 11:30:46 PDT CozyBoatSkin http://www.instructables.com/id/Make-Shingles-and-Siding-Out-of-Aluminum-Cans-Bee/
Make Shingles and Siding Out of Aluminum Cans (Beer Can Roof) - More DIY How To Projects]]> /files/deriv/F4Y/YOUV/FE3IPVH0/F4YYOUVFE3IPVH0.SQUARE2.jpg /files/deriv/F4Y/YOUV/FE3IPVH0/F4YYOUVFE3IPVH0.SQUARE.jpg /files/deriv/F4Y/YOUV/FE3IPVH0/F4YYOUVFE3IPVH0.SMALL.jpg EJM0PZTFC00G4XL robbtoberfest I haven't tested this long term but it seems to work on my chicken coop. Here's the rundown: Using scissors or tin snips cut the ends off an aluminum soda/beer can and cut down the middle of the can to make a flat rectangular piece of aluminum. Then you lay the flat piece into the forming die and pr...
By: robbtoberfest

Continue Reading »]]> workshop Sun, 3 Feb 2013 19:00:05 PST Make-Shingles-and-Siding-Out-of-Aluminum-Cans-Bee http://www.instructables.com/id/Circuits-for-using-High-Power-LED-s/
High Power LED Driver Circuits - More DIY How To Projects]]> http://cdn.instructables.com/F6F/YXSP/V4WEWOF30G6/F6FYXSPV4WEWOF30G6.SQUARE2.jpg http://cdn.instructables.com/F6F/YXSP/V4WEWOF30G6/F6FYXSPV4WEWOF30G6.SQUARE.jpg http://cdn.instructables.com/F6F/YXSP/V4WEWOF30G6/F6FYXSPV4WEWOF30G6.SMALL.jpg ERVLPDU5XVEWOF31U3 dan High-power LED's: the future of lighting! but... how do you use them? where do you get them? 1-watt and 3-watt Power LED's are now widely available in the $3 to $5 range, so i've been working on a bunch of projects lately that use them. in the process it was bugging me that the only options anyone...
By: dan

Continue Reading »]]> technology Mon, 28 Nov 2011 21:00:13 PST Circuits-for-using-High-Power-LED-s http://www.instructables.com/id/More-Handy-Tricks/
40 More Handy Tricks - More DIY How To Projects]]> http://cdn.instructables.com/F6K/CTPN/F5Y3TS8N/F6KCTPNF5Y3TS8N.SQUARE2.jpg http://cdn.instructables.com/F6K/CTPN/F5Y3TS8N/F6KCTPNF5Y3TS8N.SQUARE.jpg http://cdn.instructables.com/F6K/CTPN/F5Y3TS8N/F6KCTPNF5Y3TS8N.SMALL.jpg E9AZGN8F5Y3TS8X TimAnderson Continues the saga begun at Fifty Handy Tricks.http://www.instructables.com/id/Handy_Tricks_8_Island_Handy_Tricks/To see even more of them check out Handy Tricks 8: Island Handy Tricksand Yet More Handy Tricks and Australian Handy Tricks and Guatemalan Handy Tricks and Handy Tricks Volume Six!For a ...
By: TimAnderson

Continue Reading »]]> outside Mon, 21 Mar 2011 14:30:56 PDT More-Handy-Tricks http://www.instructables.com/id/Poor-man-s-200-dollar-plastic-heat-strip-for-penni/
Poor man's 200 dollar plastic heat strip for pennies! - More DIY How To Projects]]> http://cdn.instructables.com/F4C/KYBO/F2H0OWHR/F4CKYBOF2H0OWHR.SQUARE2.jpg http://cdn.instructables.com/F4C/KYBO/F2H0OWHR/F4CKYBOF2H0OWHR.SQUARE.jpg http://cdn.instructables.com/F4C/KYBO/F2H0OWHR/F4CKYBOF2H0OWHR.SMALL.jpg E6CUQ8MF2H0OWHU xeijix Want to bend sheets, tubes, sticks of plastic? Don't want to buy a 200 dollar heating base?Build one for pennies! (free if you go dumpster diving)
By: xeijix

Continue Reading »]]> workshop Thu, 24 Mar 2011 14:30:37 PDT Poor-man-s-200-dollar-plastic-heat-strip-for-penni http://www.instructables.com/id/Credit-Card-Guitar-Picks/
Credit Card Guitar Picks - More DIY How To Projects]]> http://cdn.instructables.com/FU6/J18X/WQXEP27WWXW/FU6J18XWQXEP27WWXW.SQUARE2.jpg http://cdn.instructables.com/FU6/J18X/WQXEP27WWXW/FU6J18XWQXEP27WWXW.SQUARE.jpg http://cdn.instructables.com/FU6/J18X/WQXEP27WWXW/FU6J18XWQXEP27WWXW.SMALL.jpg ENPFRUWUK1EP2874HK admanrocks here is something cool to do with old credit cards or fake ones you get in the mail
By: admanrocks

Continue Reading »]]> play Tue, 10 May 2011 01:00:11 PDT Credit-Card-Guitar-Picks http://www.instructables.com/id/bellows-for-large-format-camera/
bellows for large format camera - More DIY How To Projects]]> http://cdn.instructables.com/F5R/WAZX/TBVEP27XL58/F5RWAZXTBVEP27XL58.SQUARE2.jpg http://cdn.instructables.com/F5R/WAZX/TBVEP27XL58/F5RWAZXTBVEP27XL58.SQUARE.jpg http://cdn.instructables.com/F5R/WAZX/TBVEP27XL58/F5RWAZXTBVEP27XL58.SMALL.jpg EDITKGPCR7EP28788U lennyb heres how you can make a bellows for a large format camera . while i realize that film cameras are the old way this can be used if you want to make a scanner camera a pinhole camera or even a bellows to pump air.
By: lennyb

Continue Reading »]]> technology Fri, 18 Mar 2011 22:30:52 PDT bellows-for-large-format-camera http://www.instructables.com/id/Compubeaver---%3e-How-to-case-mod-a-beaver---in-29-e/
Compubeaver --> How to case mod a beaver - in 29 easy steps! - More DIY How To Projects]]> http://cdn.instructables.com/FUF/BAX5/F1A4XUIQ/FUFBAX5F1A4XUIQ.SQUARE2.jpg http://cdn.instructables.com/FUF/BAX5/F1A4XUIQ/FUFBAX5F1A4XUIQ.SQUARE.jpg http://cdn.instructables.com/FUF/BAX5/F1A4XUIQ/FUFBAX5F1A4XUIQ.SMALL.jpg EDKZBQCF1A4XUIN Kasey Turn a taxidermy animal into your desktop PC. Both neat and handy!
By: Kasey

Continue Reading »]]> technology Tue, 29 Mar 2011 13:30:39 PDT Compubeaver---%3e-How-to-case-mod-a-beaver---in-29-e http://www.instructables.com/id/DIY-Climbing-Hand-Holds/
DIY Climbing Hand Holds - More DIY How To Projects]]> http://cdn.instructables.com/FPN/K8H6/F0ZSTG2D/FPNK8H6F0ZSTG2D.SQUARE2.jpg http://cdn.instructables.com/FPN/K8H6/F0ZSTG2D/FPNK8H6F0ZSTG2D.SQUARE.jpg http://cdn.instructables.com/FPN/K8H6/F0ZSTG2D/FPNK8H6F0ZSTG2D.SMALL.jpg EEH9476F0ZSTG2F Case Eastern Mountain SportsThere are plans all over the internet on how to build your own indoor climbing wall like over at Eastern Mountain Sports. But there's only a few well documented ways to make your own holds and well buying them can be expensive! Plus it's more fun to make your own unique holds ...
By: Case

Continue Reading »]]> play Fri, 18 Mar 2011 09:30:57 PDT DIY-Climbing-Hand-Holds http://www.instructables.com/id/Cozy-Boat/
Cozy Boat - More DIY How To Projects]]> http://cdn.instructables.com/F4B/TQB6/FNGEP4HCZQK/F4BTQB6FNGEP4HCZQK.SQUARE2.jpg http://cdn.instructables.com/F4B/TQB6/FNGEP4HCZQK/F4BTQB6FNGEP4HCZQK.SQUARE.jpg http://cdn.instructables.com/F4B/TQB6/FNGEP4HCZQK/F4BTQB6FNGEP4HCZQK.SMALL.jpg EGF6OU1EIGEP4HCZUE TimAnderson A little boat like a floating papasan chair. Perfect to lay in and look at the sky.Exactly big enough for two people to snuggle.The supermodels in the boat are Arwen and Saul.This boat is part umiak, part currach, part coracle, part papasan chair. Here's how to make a tougher skin for it from truck ...
By: TimAnderson

Continue Reading »]]> outside Wed, 23 Mar 2011 11:30:52 PDT Cozy-Boat http://www.instructables.com/id/Homey-the-Wallet/
Homey the Wallet - More DIY How To Projects]]> http://cdn.instructables.com/F8J/V15K/F0ZTLKRJ/F8JV15KF0ZTLKRJ.SQUARE2.jpg http://cdn.instructables.com/F8J/V15K/F0ZTLKRJ/F8JV15KF0ZTLKRJ.SQUARE.jpg http://cdn.instructables.com/F8J/V15K/F0ZTLKRJ/F8JV15KF0ZTLKRJ.SMALL.jpg EJWKQJGF0ZTLKKJ royalestel Ever been down and out in Costa Rica? Had your wallet stolen on the subway? Wondered what to do with your keys and all that change you had in your front pockets?Homey the wallet to the rescue! Using this patent pending, complex 6 step procedure, you can not only protect your remaining belongings ...
By: royalestel

Continue Reading »]]> play Sat, 26 Sep 2009 14:09:43 PDT Homey-the-Wallet http://www.instructables.com/id/Fast-and-Easy-wood-marking-gauge/
Fast and Easy wood marking gauge - More DIY How To Projects]]> http://cdn.instructables.com/F92/OSCB/F1SWPKDT/F92OSCBF1SWPKDT.SQUARE2.jpg http://cdn.instructables.com/F92/OSCB/F1SWPKDT/F92OSCBF1SWPKDT.SQUARE.jpg http://cdn.instructables.com/F92/OSCB/F1SWPKDT/F92OSCBF1SWPKDT.SMALL.jpg EPSCTD3F1SWPKE3 thewoodcarver Quick fast, easy wood scribe. Inscribe on wood easily, with this fast instructable. You will need. A metal rod (size of a pencil) A nut that will fit over it. A nail. A drill. A set-screw.
By: thewoodcarver

Continue Reading »]]> workshop Mon, 28 Mar 2011 02:00:18 PDT Fast-and-Easy-wood-marking-gauge http://www.instructables.com/id/Simple-Preserved-Lemons/
Simple Preserved Lemons - More DIY How To Projects]]> http://cdn.instructables.com/FZI/OVV4/F0ZSTEJW/FZIOVV4F0ZSTEJW.SQUARE2.jpg http://cdn.instructables.com/FZI/OVV4/F0ZSTEJW/FZIOVV4F0ZSTEJW.SQUARE.jpg http://cdn.instructables.com/FZI/OVV4/F0ZSTEJW/FZIOVV4F0ZSTEJW.SMALL.jpg EKLFFF5F0ZSTEL6 steven07 Tired of not being able to eat your lemons skin and all? Would you like to know how to create your own preserved lemons? well its very simple
By: steven07

Continue Reading »]]> food Sat, 19 Mar 2011 23:01:02 PDT Simple-Preserved-Lemons