With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
Bluetooth Robot... Fast, cheap and reusable
Arduino Nano based Microbot
DiddyBorg: The Mini 6 wheeled Raspberry Pi Robot!
6WD robot with aluminum chassis
YAAR - Yet Another Autonomous Robot
Kelsey's Avocado Fries
Nice. Now I do this with Cornbread instead of the eggs!
How to Access your Media from Anywhere by Hosting your Own Cloud!
Sub Centimeter GPS With RTKLIB
Save $$$, Get A Like New Laptop (or other) Lithium Battery Pack For FREE!
Nice ible, but please understand the difference between a "Potted Plant" and a "Pot Plant". Veeeeeerrrry different (although a Pot Plant can be potted).
In California we can't just make campfires. In many places we have to use these (Anza-Borrego Desert State Park E.G.). Also have to keep it covered with a fine mesh screen, so embers don't blow out).....and SirCooksalot is just a "Grammar Nazi" who feels the need to educate everybody. When I read the "ible", I understood exactly what you meant.
One piece of advice; Never paint anything challenging on your geocache. When you paint "DO NOT REMOVE", a LOT of people will remove it just because nobody is around. I have found that something more polite gets better results (unless you are there to watch it all the time).
As a former Army DI, I advise using baby diapers. NOT DISPOSABLE. Get the nice soft cotton ones. Cleaning and redyeing are the first steps. Don't light or melt your polish (unless you haven't used it in a long time, and its dried and cracked). New polish is soft and goes on easy. You just have to put the diaper over your finger (or fingers), twist it so its tight, dip it in water, glop on some polish, rub it into your boots in small circles, when it starts getting rough feeling, more water and polish, keep going until you are satisfied with the shine. All you need are:1. Brush or green pad.2. Shoe Dye3. Polish4. Cotton Diaper5. Water (or spit, which is why its called a "spit shine")You don't need a shoe brush or the little round ones for the polish.
Great instructable. This is not so much for you, but for others reading this. Check with city and state ordinances before building anything that permanently attaches to your home. I live in Southern California. I helped a friend add a pergola to the back of his house, but he had to get all kinds of permits, and it had to be WAAAAAAAAY overbuilt (probably due to earthquakes). Had to use yuuuge freaking beams, through and lag bolts, and everything had to be inspected. Building it took a weekend, but the paperwork and inspection took forever.Here are just two questions that will give you an idea. This is from Costa Mesa, Ca:Q: Do I need a building permit?A:There are very few exemptions to the requirements for building permits. As a general rule, building permits are required for the constr...see more »Great instructable. This is not so much for you, but for others reading this. Check with city and state ordinances before building anything that permanently attaches to your home. I live in Southern California. I helped a friend add a pergola to the back of his house, but he had to get all kinds of permits, and it had to be WAAAAAAAAY overbuilt (probably due to earthquakes). Had to use yuuuge freaking beams, through and lag bolts, and everything had to be inspected. Building it took a weekend, but the paperwork and inspection took forever.Here are just two questions that will give you an idea. This is from Costa Mesa, Ca:Q: Do I need a building permit?A:There are very few exemptions to the requirements for building permits. As a general rule, building permits are required for the construction of structures, additions, alterations, retaining walls, and most miscellaneous structures. It is suggested you check with the Building Division prior to constructing masonry walls and all types of fencing as there may be requirements for permits. Re-roofing also requires a building permit. Swimming pool enclosures require plan review, permits and inspection. Electrical, plumbing and mechanical permits are required for new construction, alterations to existing systems, most repairs to existing systems, etc. Prior to commencement of work, it is recommended you call the Building Division and check for permit requirements. You can reach the Building Division at (714) 754-5273.Q: How do I obtain building permits?A:The scope of work determines how permits are obtained. In most instances, permits for attached patio covers, block walls/fences up to six feet in height, in-ground pools, retaining walls up to four feet in height, storage sheds, etc., may be issued at the counter. A minimum of two site plans are required. The site plan must indicate the property layout and show the location of the proposed work. Standard plans are available for block wall and patio construction. Permits for minor residential repair work, such as water heater change outs, electrical service upgrade, furnace change outs, etc. are generally issued at the counter. Permits for larger projects usually require plan check. The Building Division counter staff is available to assist you in obtaining your construction-related permits. The Building Division counter is open Monday through Friday (except holidays), 8 a.m. to 5 p.m.Note: It is suggested you arrive at the Building Division counter no later than 4 p.m. if possible. This will allow adequate processing time for obtaining over the counter permits and/or plan check submittal.
Raspberry Pi Cam Tank v1.0
Wiring an Xbox Kinect for USB
Raspberry Pi Twitterbot
Wifi controlled Tank
Vacuum Molding Machine DIY
Stop motion paper effect with premiere!
Sponge Etching Method for PC-Board
THERMOFORMER / VACUUM FORMER / PATTERNMAKER
Got caught up in the URL thing, and forgot to say Nice Instructable. :-)
I understand why YOU used a shortened URL, but nobody here knows that you are an honest person. Shortened URLs look very suspicious to many people knowledgeable about Internet Security. I nor many people I know will click on a short URL from anybody we don't know. So, it doesn't matter why YOU used it. What matters is what the rest of the world thinks. Not trying to be rude, just honest. You might want to find a different way to track clicks.
Convert a 3D PRINTER to LASER ENGRAVER | Under 40$
IFrogLab LoRa Send and receive data between 9.9miles(15KM)
How to Create a Virtual Reality Exhibition
How to use the Nordic nRF905 Transceiver with a Raspberry Pi
THE ULTIMATE OFFROAD RC ROVER
How to kick people off of your internet (UDP attack)
Dual Boot Windows 10 With Ubuntu 16.04
Nice one. Keep it up. Once you get started doing instructables, you won't stop!
Dremel Belt Sander Attachment
Dewalt Power Bank
Raspberry Dvd Drive case
Tutorial Spot Welder for lithium-ion 18650 battery E-bike
Just google "Pocket Rocket"
DIY Distance Meter with Arduino and a Nokia 5110 display
Build your own 3d printer filament factory (Filament Extruder)
3D Printing Class
$8 GPS Receiver Hack!
Leather Tool Roll
Nice tool roll. Anybody looking for leather for projects should check out their local thrift stores. I buy leather clothes and scrap for pennies. Great for practice.
3D Printing Threaded Features with Autodesk Ember and Inventor
Embedding hardware into 3d Print
TAKE YOUR SHOES OFF WHEN YOU'RE SITTING ON FURNITURE! HAHAHA Very nice instructable. Never thought of casting a broken leg. I usually go the long route, and remake the leg out of wood. Next time I break my leg, I may just amputate and recast the stump! ;-)
RC CONTROLLER WITH CAMERA
Thanks for posting this. Are you the builder, or is this someone else's project?
Make 3d Printed Topo Maps of Anywhere
Easy Bold Portrait Editing
Flying DVD's Quadcopter DIY
Create a Clickable Google Map to Share Geographic Information and Metadata
Arduino Based - Power Control System for RPi Car PC
5 Cool Batch Files
Leather Binding a Paperback: A New and Improved Guide
Breadboard Adapter for the Raspberry Pi
ZelosLaser Cutter 2.0 : Open Source, Sturdy & Versatile
Buck Converter (DC-DC)
WIFI Battery Monitor System - ESP8266
How to hide your files inside a picture
Get Started with Python
DC Multi-voltage Regulator
Raspberry Pi - GPIOs, graphical interface, pyhton, math, and electronics.
(OUTDATED) How To Flash Windows IoT Core On Raspberry Pi 2 And Access To It Through Web Browser
How to Make Your First Simple Led Blink Project in Raspberry Pi2
Installation for the Aluminum Alloy Full Metal Tank Chassis T300
Increase and extend the range of a USB Bluetooth dongle!
Shorten iPhone 5 Lightning Cable
Capacitive Discharge (CD) Welder for battery tabs
Build a HK X650F quadcopter for GoPro style video and photography
How to use Bluetooth 4.0 HM10
5A Variable Linear Power Supply
Repair Plastic Parts
Shoji style sliding closet doors, from scratch.
Autorun anything off of a usb key
7 Uses For an Induction Heating Machine + How to Make One
Mini adjustable power supply
Using a USB external hard drive with your Raspberry Pi
Success Using the JY-MCU (linvor) Bluetooth Module
Wingardium Chargiosa: Charge Your Cell Phone Like Magic
Wireless Power Charger!
RFduino - Sending and Receiving Data Via BLE
How to Convert Any Media File Into Its Different Formats
Windows 8.1 and 7 on Dell D600 using USB
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.