Tell us about yourself!

Complete Your Profile
  • Pulse Sensor With Bluetooth and Arduino

    how can i fix this error Arduino: 1.6.13 (Windows 7), Board: "Arduino/Genuino Uno"Sketch uses 5,718 bytes (17%) of program storage space. Maximum is 32,256 bytes.Global variables use 680 bytes (33%) of dynamic memory, leaving 1,368 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is...

    see more »

    how can i fix this error Arduino: 1.6.13 (Windows 7), Board: "Arduino/Genuino Uno"Sketch uses 5,718 bytes (17%) of program storage space. Maximum is 32,256 bytes.Global variables use 680 bytes (33%) of dynamic memory, leaving 1,368 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x2eavrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x2eProblem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#up... for suggestions.This report would have more information with"Show verbose output during compilation"option enabled in File -> Preferences.please. thanks you!

    View Instructable »