Tell us about yourself!
Hi all,First, Thanks Vulcaman for this project ..... I'm buildim my very first 3D printer ...Second, I've some questions, please be patience ... ;-)Y-Axis:What is the distance between the edge and the supports of the motors X? (blue)What is the distance between the supports of the X motors and the central support? (Red)The nuts holding the motors should screw on the underside, right?The rotor should I be at the absolute center, I guess (green)Ramps:1.- Under the pololus there are 3 pins, what is the exact order in which they need to be connected? (0, 1, 2, 3, ...)2.- What is the order in which you connected your engines? Blue cable the first by the right or left? My engines have a different order (except red in the center ...)
3D home printer with Arduino
Wooden USB-powered RGB-LED lamp
Cardboard Bookshelf 'Elements'
Great Project!I'm developing my own sensor with esp-01 & dht 11 (with tons of bugs and problems) and previosly i've developed a sensor with esp-12 (nodemcu 0.9) without any problem.As I could see you've used ESP8266-01 1Mb ("black AI-Cloud" version) as mine ... but I can't program the ESP (always get esp-sync failure). How did you configure Arduino to make it work?Thank you for every step!
Raspberry Pi Wall Mounted Google Calendar
Raspberry Pi: Wall Mounted Calender and Notification Center
Touchscreen Wall Mounted Family Sync & Home Control Panel
MASLOW: an Open WiFi Detector with ESP8266