With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Designing a Multi Node LED PWM Lamp
Raspberry Pi Internet Weather Station
Hacking Automotive Ultrasonic Sensors
Can you copy the actual error messages and copy them into a reply to your message? Honestly, I have no idea what a "failed to add edge detection line 710" means. Basically, we need the actual complete error message to be able to provide any help.
I get errors like failed to add edge detection line 710 and No module named evdev I tried all the files u uploaded but I get a error. :(
Yet Another - High Brightness LED (HBLED) Aquarium Lamp
IR Temperature Controller for SMD Skillet Reflow
Thanks for sharing project. Code is working perfectly. Wondering how to change temperature unit from DEG F to DEG C
How-To Repair Dead Lego Mindstorm LCD
Realtime OS / LCD on $12 Discovery Board
Well, I'm still seeing lock ups at times. Seems like the display will run for days and days - weeks and weeks sometimes. Then, I get into cycles where I have to cycle the power once a day. And that will go on for days. Then I'll be good again. Super hard to diagnose as a standalone app. I guess some kinda file system logging could be done.But I'm pretty sure the problem relates to the weather api call. I think it gets stuck on the line that calls the weather api.That call should be wrapped in a separate task so the main task can continue even if the weather api code dies. But alas, no time no time. Seems easier to cycle the power for now. Well, until the Pi file system goes corrupt again with all the power cycles, that is.What we need here is a fresh volunteer python wiz.
I found out what my problem was. I used ssh from my laptop to remote into the pi and start the weather program. Everything works as long as my ssh session does not die. That was the problem. When my laptop goes to sleep or if I exit the session the weather program freezes. The solution (for me) is to run the weather program directly from the pi and not remote from a ssh session.
Very cool project. Great explanations as well.I got this to work on the PiA+, B+ and Pi3. What I find is that it runs for a few hours this it freezes. Meaning the display is there but the seconds stop...no more updates. I can still ping it with no problem. I used a 5' and 7' display. Any ideas?
Super Easy PC Control of 110 Vac using a Crydom Solid-State Relay
hi can i use this ultrasonic sensor with the arduino
HiI used this site to get my location.https://weather.codesJust search for your city.
HiI used this site to get my location.https://weather.codesJust serach for your cirty.
Is it possible to show the name of the city matching with the location code/zip code?
How did you get your location code?
Cen-Tech Infrared Thermometer Mount
Found a smaller screen for it and mounted on the wall at work, well monted it near the wall anyway. :)
Build your own boom microscope.
Made this project using a Rpi3, and the new Rpi 7" touchscreen. Had to adjust the display resolution to fit properly, but it looks great! Will probably modify the code to allow for touch (instead of keyboard) input, and add a few more screens.
Hi Jim,I'm having the same problem - would very much enjoy looking at your full docs!Thank's!!
Hey Jim, thanks for the hard work i'm having a hard time with the setup, I'm using a pitft 2.8" 320x240. I'm using FBCP to copy the frame buffer to the pitft. (looks like you have done a build with it as well) when i use the new script listed below i get the following error,[code]pi@weather:~/Weather $ sudo python weather.pyTraceback (most recent call last): File "weather.py", line 19, in <module> from evdev import InputDevice, list_devices ImportError: No module named evdev[/code]When i comment out that line i get the image perfect, but the refresh image blanks after refresh for what im guessing is almost a second before the image comes up again for a split second then blanks againwhen i run the old script from the Weather.zip the image formatting / scaling is incorrect, i've tried messing around but have had no success. Let me know if you have any ideas, thanks!
Great instructable ! I was able to modify the script to suit my needs. Next step: PiTFT and enclosure
Thank you for the nice tutorial how to set it up. I have it running on my Raspberry Pi 2, with a Dutch zip_code. This also works, very good.I would like to ask if it is possible to reduce the screen height with the configuration?For the rest i will take a shot to translate this to Dutch.Thank you for the nice application.
I see you've make it work on one of the pitfts, I cant manage it, how do you do it? This is as far as I've gotten. It works through HDMI on my TV though.
I can't get this to work. When I run weather.py nothing happens on the GUI. This is what the terminal shows:
Thanks. I've edited the limits so its using the whole screen now. Looks much better. And I'm thinking about adding an I2C sensor to display Indoor temperature and humidity. Was looking at this instructable to read the data from the sensor. See any issues with this plan?Many thanks!Jeff
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.