Tell us about yourself!
If the power cord for ps1 was coupled with another and the ground was cut out on the second cord, you can power both units using the modified cord without having to open either of them up as long as they are isolated from each other and chassis don't touch you're good to go
I used IRF640 mosfets for this project as well
Decided to re-do the driver with some changes and like how it worked out :) A little cleaner looking. Mosfets stay cool but the capacitor heats up and will blow from energy storage I believe, so I'm going to add another capacitor in parallel and see if that helps. Liking this so far. :)
Getting Started with Electronics
Not the prettiest of heaters but I did make it. Only issue is I keep blowing mosfets but I believe it's because they are really low Z4A and not irf250's but that's what I have on hand. Thanks for the instructable :)
Hello, i'm having an issue with my mosfets. I have a bunch of IRF650b mosfets that seem to all be staying open. I test them completely and they wont discharge and close. I am testing them with 5 and 12v. When I test my FQA9N90C Mosfets, They work just fine. Is ther something different about the 650's that need to discharge or are they all no good? Thanks for any help.
I know this is late but maybe because the colour code is actually br-bl-bl-gold for 10 ohms. the colour code or-br-bl-gold is 31 ohms, going by calculator and is a non standard e24 series.. Hope this helps