loading
4CommentsBroken Arrow, OK
just a shade tree everything

Tell us about yourself!

Complete Your Profile

Achievements

Metalworking ClassClass Complete!
Show 1 More »
  • Outfeed Table for Dewalt Table Saw for $10 (includes plans)

    Found the written instructions:The DW7491RS is slightly larger and the vertical tubes are 1.125" not 1 inch which requires laminating 3 pieces together and cutting a 1.125" slot to fit around the larger tube. Horizontal is still 1 inch. Also the distance from the top of the top of the saw table to the top of the horizontal tube is 4.25". To position on the outfeed supports means you must subtract the .125" clearance and .5" ply top. This results in the top of the wood hook needs to be positioned 3.625" from the 1/2" plywood outfeed supports. Bottom line is will work but requires adding one more vertical piece (3 not 2) and sizing it to 1.125" then locating the hook that hangs over the 1" horizontal tube requires locating the top of the...see more »Found the written instructions:The DW7491RS is slightly larger and the vertical tubes are 1.125" not 1 inch which requires laminating 3 pieces together and cutting a 1.125" slot to fit around the larger tube. Horizontal is still 1 inch. Also the distance from the top of the top of the saw table to the top of the horizontal tube is 4.25". To position on the outfeed supports means you must subtract the .125" clearance and .5" ply top. This results in the top of the wood hook needs to be positioned 3.625" from the 1/2" plywood outfeed supports. Bottom line is will work but requires adding one more vertical piece (3 not 2) and sizing it to 1.125" then locating the hook that hangs over the 1" horizontal tube requires locating the top of the hook at 3.625".

    View Instructable »
  • Outfeed Table for Dewalt Table Saw for $10 (includes plans)

    Love this, only have a small garage shop, so when I am not working on projects our car/truck/HD are parked in it. So to have the maneuverability is awesome. I have a different Dewalt - DW7491RS but I found an individual on Amazon that already did the home work on the mods (included a picture).

    View Instructable »
  • jlehm005 made the instructable Wooden Binder3 weeks ago
    Wooden Binder

    I actually found this on another site under Bulletproof Binder and altered from there as I wanted wood also. Plan is pretty much the same though. I used Dangerous Threads Scrapbook Binding Screws - Screw PostExtenders Nickel Plated ordered off of Amazon instead.

    View Instructable »
  • jlehm005 commented on ClenseYourPallet's instructable Hardwood Rug2 months ago
    Hardwood Rug

    This is beautiful, wish I had a place to put it in my house because I would be doing it, thank you for posting it.

    View Instructable »
  • jlehm005 followed BBQ & Grilling, Survival, Life Hacks, Home Improvement and 14 others channel 11 months ago