With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Yet Another DIY Diode Laser Engraver
Repurposing my Laser CNC into a multi-tool CNC
Frape helps to solve the problems more easily :P :P Thanx a lot johnny i will start tomorow with aluminium rods.. but i will follow your steps !! i hope i will make it !!
How to make PCBs easily
Attiny85 as a Step/Dir Stepper Motor Controller
Take a look at my new Engraving softwareRobot Laser Project page : http://www.robot-eyes.com/en/RobotLaser/At the moment the software is WORK IN PROGRESS currently, in ALPHA testing.ALPHA and BETA Versions are totally free.Please send an email at firstname.lastname@example.org with your opinion, thanks.Carlo
Have you tried marking copper with black sharpie? I use a Rofin laser welder and with silver and sometimes even rose gold, you have to mark it with black marker before it welds. It's also using a high watt UV laser module for the weld pulse. Not sure if that'd help ya out any.
You sure can do that!You need to specify the control unit you will be using. Is it a PC, a Raspberry Pi, an Arduino ?If you assemble a stepper-controller, and give it step instruction from your control unit, you can make a motor spinning in no-time!
Is there a way to integrate this step motor system into another design system if I give you the plans and basic drawings? It is for creating a motion picture film reel to reel scannerUsing a iPhone time lapse camera or a sale camera or even a flatbed scanner with a acute limited section enabled via software to scan at HDR resolution from old film or new developed film negatives 35mm, 16mm, 8mmAll have different step motor presets So this is where your part of How to control the Step Motor Reel to Reel chassisThis altogether could make a frame by frame film scanner that is low budget compared to the $250,000 USD ARRIscanOr the black magic design $29,000The Laywer is tempting but still the cost of a carSo if possible can we build this based upon this and other people's work! ? To make an off the shelf kit? Thanks
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.