Tell us about yourself!
Beyond Infinity Table - the Interactive Coffee Table for the Modern Age
Modern Led Infinity Mirror Table Lamp
Raspberry Pi CNC Machine
I'm in the middle of doing mine to make the jig I placed the pcb (the blue board) onto a sheet of mdf and used a 0.8mm drill through each hole to mark out where the leds go, then drilled each hole with a 3mm drill (my leds are the 3mm ones).I did this before I started to solder the components on the pcb.
3D LightSquared 8x8x8 LED Cube Soldering Steps
AuraCube 8x8x8 Complete Assembly Guide
8X8X8 3D RGB LED Cube
LEDs and Lighting Class
Welcome to Arduino