Tell us about yourself!
This is awesome built shuttle that I ever met or see before. So simple and cleared. Thanks for your shared those clear and close-up pictures.I can not fine 3/8" Steel Round Rod with more than 48 inches length at Home Depot. Could you please give me the item number that you purchased? I only see 48" max on the website of home depot.Appreciated.
3W 4'x4' Arduino Laser Cutter/Engraver
Thanks a lot RobotEyes. And with basic Uno board, if we use pin D11 for PWM Laser , we have to use one Transistor and relay to control the laser diode? Is it correct? And I saw the "2 axis laser engraving board" selling on eBay, banggood, Ali..(cost 21$) .they connect 12V laser direct on the board. Is it have onboard mostfet or relay? Thank you Sir.
Homebuilt (DIY) CNC router - Arduino based (GRBL)
i am so confusing. You do not use Limit Switches, how can machine know the 0,0 position? Thanks
Thank you Sir so much. And i saw everyone uploaded only the Hex file, could you please upload the Sketch folder of GRBL? Because i want define the limit for the frame. If i want to increase the X,Y travel, i have to define in sketch library, can not re-define in Hex file. Is it correct? Appreciated for you help.
And all the pins out of Arduino CNC Shield is the same with Eleks board, or Arduino Nano, is it correct, RobotEyes? I am so confusing with thease boards. The author just uploaded the Hex file only. So, all ARDUINO board for CNC projects they will defind the pins out (out put for signal) the same with all boards, right???
what is the board you use for Robot Laser software? Thanks
Heloo MichielD99.First, Thank you so so much for your sharing.Second thing is: if I want to increase the X,Y travel up to 1000mm (bigger frame), where can I edit it? Or just use the Limit Switch to set it limits?- And could you upload your Hex file to dropbox? I can not download your hex file.Appreciated for your help.
Arduino Laser Engraver Wood Design!
Anyone know my problem, please help.If I want to modify the frame and increase it up to 1000mm in X & Y , does Benbox software can configure for that dimension? Bigger than popular Laser engraver machine on market now.Thanks a lot for any input.Regard!
Benbox with Eleks Laser Engraver (GearBest /Banggood)
3D Printing Class