With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
Landscape Garden Border Edg...View Instructable »
Plastic white things are spacers from HomeDepot. They aren't quite wide enough so there is some wiggle side to side. My intent was to prevent the wiggle more than act as a "wheel". I would probably get a bigger post if I did it again, but this was on the fly. U bolts are sturdy and stay square if you adjust properly. I added some caribiners to the springs to I could easily remove the drill with Ubolts attached for quick free-drilling, though its pretty bulky for tight spaces. Total pain to remove the bolt "cage".
I used your design for inspiration to create my own. I modified the design to fit my drill using U-bolts instead of wood.
Automatic Electronic Plant Waterer
Garage Door Pergola
DIY smart home doorbell for less than $40!
Custom TV Speaker, Streamin...View Instructable »
A Best kept secret to Losing weight
Custom PWS Weather Station ...View Instructable »
Worked great! My only tip was troubleshooting how to best get them out. I did a light run of hot water and then squeezed them out, a few at a time, with my kid holding a bowl.
I found an even simpler way of getting a similar end result. Hit the dollar store for some cardboard skeletons and spooky characters. I had some blank newsprint type paper on hand. I had perfect small, square windows where I fit the skeletons cut to size and backed them with the newsprint. Spooky during the day and at night. Photos from inside the house and outside at night (upper right window).
Spooky Window Silhouettes With Follow-Me Eyes
Marble Embellishments for a...
One Pallet Lemonade Stand
Simple workbench from Ikea ...
I made it, but no photo. Piece of cake!
DIY Chicken Wire Ghosts
Awesome halloween corpse for less than 3 bucks
I followed the instructions here but found out that the garbage bag I had was too small (where do you get a human sized bag?). After making a "child" sized corpse with paper, it didn't look convincing. I removed the paper and instead bundled up a large Elmo stuffy, which ensured a body shape. To enhance it, I placed the corpse in a spider web!
I followed a different set of directions which used the same basic ideas of chicken wire. I found the wire very difficult to mold, though I was able to get it to form to a basketball as the head. I even hang it from a tree with fishing line, until it snapped. I tried some glow paint which didn't work at all, so resorted to draping cheesecloth over it and staking it in the ground.
I don't have any progress photos and only thought to post this as an after thought. I plan to document future projects accordingly.
Expandable Puzzle Storage R...View Instructable »
Enable wireless rain sensor...View Instructable »
Simple Under Deck Rain Catc...View Instructable »
Umbrella wasp removal.
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.