With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
progress is good, looking great so far
it goes as far as the fog
Argh that is annoying! I will have to do some redesign for a newer version. If anyone else does so before I get around to it, please share the file and I will update the instructable.
Acrylic & Wooden Chandeliers
great idea. have fun with the build
yes, sorry to not be more specific
Nice. Good luck with the full-size build
or the light vaper
Yes, no arduino = no lights. But it would be pretty boring if you couldn't program them anyway
great job - premium membership sent
Yes - the mirror is a very thin film of mylar. Just make sure you have it facing down rather than up!
Quite possibly - they can be defocused so that might work. I'd be surprised if they were actually 5 mW, though - they're bright, but no more so than standard laser pointers. A 5 mW laser makes it hard to look at the dot, and these aren't at that level of brightness. I take the advertised rating with a hefty grain of salt.
falling for that one I am not
Thanks. No - the ecig has a safety cut-out at 10 seconds. So you need to release and hold again. Good idea to keep an eye on fluid levels though - you don't want to dry-run it.
I did miss the fan, but the laser modules are there. Buy 2 packs of 10 - I found quite a few (20%?) to be duds. I will update the fan later today.
Print one out and assemble one for them! Of course, their parents might blame you for getting them into vaping...
lukeuser is correct. Their focus is pretty terrible so I suspect the spot size is pretty large even at a few hundred ft.
you should make that jeff! Sounds cool.
No fog means the beams are not visible. Unless of course you're using a really powerful laser, in which case you can't swing it around safely and the length (for practical purposes) will appear infinite.
Thanks Sam. It is a pretty fun thing to have lying around for sure. Looking forward to Halloween already.
yeah Eric listen to the bandicoot
Eric you have better things to do than critique burger recipes
The funny thing is, I thought exactly like you until one day I went to the supermarket and they had no ground meat. I turned my nose up at the frozen ones, as hipsters are wont to do, but eventually my desire for a burger outweighed my snobbery. Best patties I'd ever made. Have never bothered to make another one myself. I think the bad reputation comes from "oh, they're frozen, better cook the **** out of them". Cook them properly and they're great.
There is a similar disconnect between the number of daily views the "Launch Stats" window gives you and the extent to which the view count increments. My best guess is that the referrers/stats give you number of unique visitors to your instructable, but the view count includes every "next step" click as an additional view.
Yes, I only did the edges. Probably should have done the back too but I was in a massive hurry. No signs of peeling of the poster - that glue is pretty effective. 3/4" plywood. Note the main error I made was using a piece of plywood that had been stored outside in humid conditions. When it dried (weeks), it warped. I strongly suggest storing the plywood flat inside before posterizing it.
Nice! Yeah, slow computers do seem to struggle with these big files. Interesting to see the contrast added by the burning.
Thanks. Try a service (there are many online). I don't sell these.
Sure. It would just be a bit bulkier.
a whole state... yeah, ambititous
Nice. Love these things. A few questions: what were the spacings (top and bottom gaps) that you ended up optimizing to? Might be a good starting point for those who might like to make one. Any difference between steel vs. aluminum rulers (noise?)? Did you consider using a receptacle timer to auto-limit it to a few minutes?
Really nice! Great bit of wood. Thanks for posting.
odd. If a big TinkerCad file works, it might be something about the stl format 123D Make doesn't like. Perhaps try opening the stl in another program (Meshmixer I used to trim the Terrain2STL files) and resaving?Note: 123D Make is very buggy - Autodesk stopped supporting it soon after launch, and its functionality is supposedly going to appear in Fusion360 in due course. I will update this project when it does.
Thanks. Certainly the fussiest I've ever done! Was worth it though
Hmm, strange. Does this happen with all sizes of map? Grabbing a very large piece of terrain leads to monster STLs that 123D Make might be balking at.
Nice! This is the Seattle area?
I think it was about 4.5 mm. 1.5 mm would be a TON of work!
A 24 V fan or something to step the voltage down
Pretty close to 5' (1500 mm) wide, and a few inches higher than a standard door opening (probably about 7'). You're welcome, and good luck with the build.
Superb! Great finish quality, love the dados and the contrasting beech fronts. Awesome job, thanks for posting the pictures!
Transfer Board for Wheelchair Users
Great stuff, Scott. It was cool to watch you mill this - that Haas was absolutely howling for days!
Tools and Materials for Laser Cutting
Welcome to Laser Cutting
Laser Cutting Class
very effective, thanks for sharing
DIY String Light Chandelier for $40
Great. If you could provide the file you thus create, that would be awesome - I will add it to the others.
You're welcome, I hope it helps.
The chandelier is over my dining room table now (see attached reflection) and the photo is awaiting framing for my office. thanks again!
Augmented Reality Toolpath Visualization
Fantastic work, Steve! I'll treasure these photos, great memories
Looks great! I like the brass/walnut combo. Thanks for posting. Premium code sent.
Scott McIndoe Pier 9 Residency
The laminated wood looks great! Premium membership sent. Thanks for posting.
Really nice! I like the effect you get with knots. Premium membership sent.
Thanks. Those are in fact all the files I have; I think I must have saved over the Group 2 ones (I was pretty seriously sleep-deprived at the time, I'm frankly surprised only one set is missing). I no longer have access to Illustrator as I have left Pier 9 so can't remake it. However - they're easy to edit - just redo the text for Group 18, referring to any online PT for the correct atomic numbers, symbols and names.
these are prime but they only have one in stock. As far as I can tell from the photos (and my own experience of buying multiple batches), they're all the same.
Thanks for letting me know. Try this link (also fixed in instructable). Unfortunately, I haven't been able to find a stable link for these.
Read step 4, and mimic the set up in the 4th photo
I'm sure the site would love it if authors did this, but yes, it's tough to enforce - there is not much motivation for authors to continue to maintain a project. I'm not really sure why I do it, to be honest! I've previously suggested that the site sends authors emails on the anniversary of the publication of an instructable, saying how many views/favorites/comments have happened in the last year. This would perhaps act as a gentle reminder that their project has a life beyond the initial burst of action following publication, as well as perhaps encouragement to check out and address the comments.More proactively, well-maintained instructables could be rewarded with re-featuring. This has in fact happened to some of my more popular projects, but that might be more because they're good g...see more »I'm sure the site would love it if authors did this, but yes, it's tough to enforce - there is not much motivation for authors to continue to maintain a project. I'm not really sure why I do it, to be honest! I've previously suggested that the site sends authors emails on the anniversary of the publication of an instructable, saying how many views/favorites/comments have happened in the last year. This would perhaps act as a gentle reminder that their project has a life beyond the initial burst of action following publication, as well as perhaps encouragement to check out and address the comments.More proactively, well-maintained instructables could be rewarded with re-featuring. This has in fact happened to some of my more popular projects, but that might be more because they're good generators of views rather than the fact I still answer comments on them; hard to know.
Meat Cooking Basics
Cuts of Meat
Tools + Supplies
Yes; now uploaded. Both files are pretty large. Good luck! If you do make one, please post a picture.
Nice! I like the interesting angles you used. Premium membership on way.
Nice! Imagine a hand-knitted 3D periodic table Christmas sweater! I'd wear that :)
Sorry! Thanks for letting me know. Try this link.
Agreed! He did an amazing job. And thanks
No, it's just a movie taken with my phone that I sped up to 4x (four times) speed using iMovie. Otherwise I doubt people would be patient enough to watch the whole thing.
Contact Larry McNish (see step 1). He is very generous, but I am unwilling to pass on his hard work myself.
Great job! Premium membership on the way.
There is only one video (at the end), and it is not on autoplay.
Thanks. Good luck with the build, if you do take it on.
I'm not going to cut into my ceiling either - they're solid wood. It will be more of a ceiling-mounted box. But yes, the transformer can be wired directly into the home supply like any light fitting.
Good question! It is a beast. I need to make something to hang the fitting from in my dining room, and I will make room in that for the power supply.
Link fixed. Thanks for the heads-up.
Thanks Jeff. Thinking of a party mode for Cielo?
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.