loading
3Comments

Tell us about yourself!

Complete Your Profile
  • Adaptable 12vDC/220vAC Pure Sinewave Inverter

    Hi manolission,How much current does your inverter (from your 12V DC supply) draw when you have no load connected to the output (AC load)? I also built this project but noticed that my inverter was drawing alot of current even with no load connected to it. I then re-wrote the code and tried again, same story.

    Hi manolission,How much current does your inverter (from your 12V DC supply) draw when you have no load connected to the input? I also built this project but noticed that my inverter was drawing alot of current even with no load connected to it. I then re-wrote the code and tried again, same story.

    View Instructable »
  • Adaptable 12vDC/220vAC Pure Sinewave Inverter

    Hi Nick.I've built an inverter based on your designs and the output is a 51Hz 230V sine wave. The problem I'm sitting with is that the power stage draws too much current and drains my DC power source very quickly. When the inverter is switching (no 220VAC load connected to transformer) my 12V supply is sourcing 8Adc to the transformer. Is this normal for your design? Any sugestions?

    View Instructable »