With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Without dog openings in the outside edge of the vise, I can't use the vise with the tabletop dogs. I mostly use the dogs to hold boards from sliding around the table while working, rather than any squeezing work. Since my vise is so small, I just use it to hold onto pieces as I'm working, relying on long clamps to do any squeezing work.Thanks for the detailed question!
That looks really great! I know your mum will love it :)
Practice makes perfect..delicious, practice :) Thanks for sharing!
Yum! I spy the deadliest combo in your picture: mushrooms and a perfectly cooked steak :)
Those are some great looking die, thanks for sharing!
Looking good!Reuse is great, but be careful when using old pallets - they are sometimes treated with chemicals. Here's a handy Instructable that should help determine if it's safe to use for food.
Ha, what a good occasion to send that card.Thanks for sharing your picture, enjoy the Pro Membership!
So cute!Thanks for sharing your picture, enjoy the Pro Membership!
Would make a good fidget spinner. Also, that GIF is mesmorizing :)
FANTASTIC!Those large voids look SO good. I'm glad you had a blast making it, and you'll figure out faster techniques on the next ones you make. Great job!Thanks for sharing. Enjoy the Pro Membership :)
This is a great exercise for making straight cuts. Thanks for sharing!
Looking good. Now, onto the next lesson!
Finally, a fidget spinner that isn't distracting!
Oh, hello tonight's nightmare. I think I've had enough Internet for today :)
Cookie Monster is just so adorable! :)
That insert looks extra stylish, since it's from flooring :)Thanks for sharing, enjoy the Pro Membership!
Custom Tool Wall
I have a pegboard in my shop, but I really need to upgrade and solve some storage problems that aren't addressed with my system. Thanks for the ideas, Troy!
LOVE your frame project. Glad you too your own spin on it :) Thanks for sharing!
Looking good! Practise makes perfect :)
Wow, very nice scrap :) Thanks for sharing your insert, Sam!
Looks tasty! The skills for beef easily transfer to lamb, so happy you tried it out!
So glad it turned out great! The world of meat is very exciting, and cooking for friends is the best!
Rockets ClassView Instructable »
Tools + Supplies
This is very clever. Reminds me on how they make those colorful sugar candies with designs in them. I'll have to try this technique out for myself! :)
Fix a Hole in DrywallView Instructable »
The extra heft and support is a great idea! Thanks for sharing pictures; enjoy the Pro Membership!
Thanks for sharing pictures of your build. Enjoy the Pro Membership!
Looking good. Don't worry too much about the small details, they are going to be tossed around after all :)
That shot of the steak in the pan.. SO GOOD!
Looks great! Electric stove is just as good as any other type, the real secret is the skillet :)
The best part about this simple saw sled is how easy it is to build, so making new ones for different projects is a breeze. Your sled looks nice, thanks for sharing! Enjoy the Pro Membership.
Looking good so far! Here's an option to use tea staining instead of commercial stains, if you're looking for a different stain.
Looking good there!
Take your weapon. Strike me down with all of your hatred and your journey towards the dark side will be complete!
Toy blocks is a great application for learning the skill, nice work! Also, your painting is Picasso next to mine :)
DIY Zero Clearance Table Sa...View Instructable »
Clever additions to your sled. Do you have pictures of your sled? Maybe you can share your build process as an Instructable?
Using both mitre tracks doubles the chance of the sled binding in the slot. You only need one track to keep the sled parallel to the blade and cutting accurately.
Today I learned something new!Thanks for sharing this. I investigated my calipers after reading this comment and tried it out, and it's another very accurate way to measure the mitre track depth. Here's an image that shows what labdude is talking about.
Nice! You have enough information here to write up your own Instructable, you should share your process so others can learn :)
Looking good so far! Sounds like you overloaded your drill. Let the teeth of the hole saw do the work and don't push too hard. It might also help to find a corded drill so you have plenty of power when you need it.Looking forward to the project when it's complete!
Though primarily used for cross-grain cutting, a sled is a great way to secure smaller pieces of wood to make cuts on the table saw without fear of cutting your finger off :)
Nice glass and wood case! What are safety prize sheets?
That's really neat! Can you share your process for making bandsaw boxes?
That looks really great, and such a unique way to decorate your kitchen! Thanks for sharing.
Easy Table Saw SledView Instructable »
I like the addition of paper pedals, very clever!
MitresView Instructable »
Remove Stripped ScrewView Instructable »
The mineral spirits evaporate and should only leave the thinned silicone impregnated fabric. I'd wager these are just as flammable as other waterproof fabrics.
Looking good! Application on the removable pant bottoms is a great idea, and multiple coats seems to be the answer for your use. This solution is so easy to mix up there's no worries about needing another treatment if you require it. Thanks for sharing a picture of your results. Enjoy the Pro Membership!
Probably not to be ironed.
Looking good! Application on the removable pant bottoms is a great idea, and multiple coats seems to be the answer for your use. This solution is so easy to mix up there's no worries about needing another treatment if you require it.Thanks for sharing a picture of your results. Enjoy the Pro Membership!
I think painters canvas would work. You might need to alter the ratio to get a thicker mix for fabrics that have a wider weave.
The silicone sticks very well to fabric, but I'd suggest hand washing to prolong the life of the application.Folds and friction will wear faster than other spots, but silicone is durable and can withstand a lot of abuse. There's no reason you couldn't apply a spot fix if there's any degradation over time.
Once cured the material isn't that tacky, and you can usually brush off dirt easily - for stubborn dirt you can just use the hose :)
Good question - I don't know! Best to try it on a scrap piece of velcro before committing.
Easy Waterproof ClothingView Instructable »
Airlocks are a great method to release gas without letting air in. If sterilized correctly you reduce the risk of contaminates dramatically. You can easily use any alternative you can think of, but your risk goes up.
Looking good, thanks for sharing! I'm glad you're having fun, I can't wait to see what you come up with next!
I wish I done more research before I moved into a high altitude, I had constant nosebleeds for a month it was so dry. We miss you here, Jessy! But, so glad you're happy there :)
This is really neat! I want a stool like that at home :)
Wow! Did you do the edges with a router? It's going to look great with a stain.
Looking sharp! There will be no problem finding your house now.
Great looking dice! The color combination, along with the sunken pips is a nice touch.Looking forward to your next lesson project, good luck!
You can still play some games with 3 die instead of 5 :)Looking good, practice makes perfect. Thanks for sharing. Now, on to the next lesson!
How is it unsafe?
Great work! Love the contrast in wood choices, and that radius edge is very smart.Thanks for sharing, enjoy the Pro Membership!
Thanks for the kind words. The light is actually movable, held in place with a large magnet which stick to the side of the tub. You can see this in Step 34.The light is placed at the foot of the tub for the photo shoot. Sorry if that wasn't so clear.
Glad you like it! I hope you're inspired to make something unique, I'd love to see your results!
Planers work best when the blade is moving along the grain of the wood. Using a planer on the top means hitting end grain, which a planer is not very good at resolving. I wouldn't recommend it.
A fan is a great idea! I had to put all the extras on hold as I was already in really deep with this build and wanted to complete it. A shower curtain for privacy was another idea that ended up not being included. There's always time to add these in later, though.The casters have a screw lock, but you don't really need them once you're inside; your weight plus the hundreds of cast iron pounds keep things stationary.
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.