run your arduino IDE with sudo and check the port. Also run dmesg in terminal to find if ESP is detecting
Ru5 arduino as administrator . Ch3ck if you have selected correct port
This reason is very generic. That's why I don't reply comments. You'll don't give me any details how will I solve the problem? Whatsapp me
open settings.cpp in project folder. scroll to line 41. now change the quoted text
you made a mistake while following the procedure. repeat everything again
this will be a long discussion. whatsapp me
In the additional board manager add the urls http://diy.mikolex.de/package_esp8266com_index.json And http://download.igrr.me/versions/2.3.0/package_esp8266com_index.json
Which board do you use for this project?specify.
Try again all the steps properly right drom begining
Repeat all the steps again. Start from very begining(from flashing the firmware)
Its absolutely normal. It is coded in such a way in which max power can be used by the esp8266.
You have selected wrong com port. U can use whatsapp to contact me to get immediate answers +91 840 797 5073
To add esp8266 in Arduino IDE, use either of this links. They are currently the working ones. Go to preferences and in the add additional bords textbox Use this urls. http://download.igrr.me/versions/2.3.0/package_esp8266com_index.json http://diy.mikolex.de/package_esp8266com_index.json
To add esp8266 in Arduino IDE, use either of this links. They are currently the working ones. Go to preferences and in the add additional bords textbox Use this urls. http://download.igrr.me/versions/2.3.0/package_esp8266com_index.json http://diy.mikolex.de/package_esp8266com_index.jsonFor immediate reply use whatsapp.
You are on right track. The led will glow only at the time of connecting to usb. Then connect to 'pwned' ssid with passwod 'deauther' and open browser,type 192.168.4.1 thats all
I hope all these header files are open in your Arduino IDE.
make sure all these header files are open in Arduino IDE
https://cdn.instructables.com/ORIG/FDU/V64V/J20PAQA6/FDUV64VJ20PAQA6.mkv this will help..
watch this video clip to see the error
it's just copying and pasting of two files. If you are unable to just copy the files from one directory to another please watch the video https://youtu.be/ZFPS0kJ6wPI I will not solve this issue thereafter as it was asked multiple times.
Describe your problem. If possible share the error logs
in Windows 10 I use nodeMCU flasher https://github.com/nodemcu/nodemcu-flasher and in ubuntu I use esptool https://pypi.python.org/pypi/esptool
update to the latest SDK and it will work as expected
thanks for bringing it to the notice of other people. but surprisingly it worked for me with the single underscore
that's really cool, dude. Keep your great work up.
watch my video on that. https://www.youtube.com/watch?v=ZFPS0kJ6wPI
Try using different browsers and different devices. It will solve the problem.
Dude it's 192.168.4.1 and not 192.168.4.2
sorry. i never tried MAC. i use windows and Linux only.
Open device manager and scroll down to COM and LPTthere you will notice something like usb to ftdi connector or similar to that. Next to it port no will be written. That will be the port number for esp8266
thank for trying. if you want to change the SSID of the ESP8266 it's very simple. open the 'esp8266_deauther-master' folder and then open the 'esp8266_deauther' folder. Open the 'Settings.cpp' with any text editor (like Notepad++) and scroll down to find the 'void Settings::reset()' function. Ther you willl notice ssid = "pwned"; and password = "deauther"; Now you can replace that with anything you want.
thanks for trying. the deauth attack takes some time(~30-60 seconds). please note that this attack works only for 2.4 GHz and not on 5GHz. Please try on other network and check the results. You can contact me at firstname.lastname@example.org
You must have either messed up with the baud rate or you selected the wrong COM pport.
Please, note that those are the libraries created by Nodemcu espressif. I am not responsible for their errors. But still Thanks!
the code works perfectly even with the existing libraries. Try using esp8266 2.3.0 SDK. it works
PIR Controlled Relay
I think you have accidentally messed up with libraries. Go to Tools>Board > Boards Manager Type in esp8266 Select version 2.0.0 and click on Install (must be version 2.0.0!) If you any other version it will not work.
PIR Controlled RelayView Instructable »
If u are using NodeMCU why do you need usb ttl coverter. NodeMCU already has micro usbb
Please refer http://www.arduinesp.com/getting-started
Can you tell me the exact message
Check if you have followed the steps correctly and that the right SDK installed, it must be version 2.0.0!If it can send packets but your target doesn't lose its connection then the WiFi router uses 802.11w and it's protected against such attacks or they communicate via 5 GHz WiFi, which the ESP8266 doesn't support 5 GHz band. for more info check ' https://en.wikipedia.org/wiki/IEEE_802.11w-2009 '
I think you have mistakingly typed a keystork. Use the code from the this link https://cdn.instructables.com/ORIG/FCC/N7QT/IZYGFOWR/FCCN7QTIZYGFOWR.zip
which OS do you use? if you are using Linux always run 'sudo arduino'. and I hope you have installed the correct drivers.For ESP8266-Amica CP210 drivers and for ESP8266-Lolin CH340G drivers
refer previous reply
Important Camera Settings
Choosing a Camera, Tools and Supplies
Your First Experiments
Conclusion & Going Further
use the latest code for the project. they can be downloaded from project
Writing an Instructable and Adding Photos
Publishing an Instructable
Welcome to Writing an Instructable
How to Write an Instructable
This instructable code has serious flaws try https://www.instructables.com/id/WiFi-Jammer-Using-ESP8266/
WiFi Jammer Using ESP8266
RioE2 see this
Download the files from Github link and extract. In the folder, you will see a folder named 'SDK_fix'. Open the folder and copy 'ESP8266WiFi.cpp' and 'ESP8266WiFi.h'. Paste them to C:\Users\mrtejaslol\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.0.0\libraries\ESP8266WiFi\src. Replace mrtejaslol with your windows user account name.