loading
7 Comments

Tell us about yourself!

Complete Your Profile
  • muratmike commented on reglisse44's instructable The Drone Pi10 months ago
    The Drone Pi

    There is an apk file "CordovaApp-debug.apk" upload this file to your smartphone and install.

    Congratulations :)

    Mine is working too :) It was my first experience with quadcopters, i faced lots of problems. First of all, I havent any idea about MultiiWii :) I did calibrations, arming but motors didnt turn because i didn't know that the MultiWii has also arm/disarm. (Put stick right bottom arm, left bottom disarm). After i installed hostapd, i did all configurations and created AP mode but DHCP was not running so I passed this step and gave static IP to my phone. When i did automations at boot (crontab), it didnt work also. Because I didnt give any LSB tags, i think the problem was operating system tries to start AP before checking USB and couldnt find wireless dongle, so i changed this step. I created a script like:___________________________________________#! /bin/bashsudo hostapd -B /etc/hostapd...see more »Mine is working too :) It was my first experience with quadcopters, i faced lots of problems. First of all, I havent any idea about MultiiWii :) I did calibrations, arming but motors didnt turn because i didn't know that the MultiWii has also arm/disarm. (Put stick right bottom arm, left bottom disarm). After i installed hostapd, i did all configurations and created AP mode but DHCP was not running so I passed this step and gave static IP to my phone. When i did automations at boot (crontab), it didnt work also. Because I didnt give any LSB tags, i think the problem was operating system tries to start AP before checking USB and couldnt find wireless dongle, so i changed this step. I created a script like:___________________________________________#! /bin/bashsudo hostapd -B /etc/hostapd/hostapd.confsudo python /home/pi/...../main.py___________________________________________and put it in to init.d;sudo nano /etc/init.d/quad.sh # Create a scriptsudo chmod 755 /etc/init.d/quad.sh # Make it executablesudo update-rc.d quad.sh defaults # Register script to be run at startupI haven't tried to fly it. I'll give a shot and write informations here. Thank for everything.

    View Instructable »
  • muratmike followed NicolaG110 months ago
  • muratmike commented on reglisse44's instructable The Drone Pi10 months ago
    The Drone Pi

    I'm using turnigy esc and arming is different and i did it but still it doesnt work.

    Yes, you need to arm the esc.

    View Instructable »
  • muratmike commented on reglisse44's instructable The Drone Pi10 months ago
    The Drone Pi

    Could you tell me the solution?

    View Instructable »
  • muratmike commented on reglisse44's instructable The Drone Pi10 months ago
    The Drone Pi

    Hi, im using Multii & MegaPirate controller, Turnigy esc's, turnigy motors, raspberry pi, camera and linksys wifi. I did all the necessary steps. Now I can connect to raspberry pi and send command from android phone and i can see in the terminal so this side is working well. I did all the configurations in Multiwii like quadx, crius_aio_pro_v1. Esc tuning is correct 3 short beeps and 1 long beep. Everything seems well but motors dont move.

    View Instructable »
  • muratmike followed reglisse4410 months ago
  • muratmike followed Electric Vehicles, Kites, Fire, Raspberry Pi and 20 others channel 10 months ago