Tell us about yourself!
You can buy nearly everything you need at youprintin3d.de -> printers -> DICEThey even mill out the needed parts for you, just write them an email...
Hi! The link in the BOM is still working: https://youprintin3d.de/3d-drucker/dice-der-edle-m... I can recommend genuine misumi and hiwin linear rails, and not recommend the knockoffs. I have several knockoffs at hand and all of them aren't even close to the genuine ones. On the other hand, it is only 12€ to throw away if they are bad, so, you decide.
There is no XY-home-switch. The printhead has to be moved by hand in the front left corner. The print gCode then starts with a G90 X0 Y0 to set this position to the home position.
The plate shown in the videos is from my first prototype. The more holes are needed, because i did put the powersupply into the bottom compartment. In the final version (what the available files are) these holes aren't needed.
Beverage Appliance with Web Interface
Arduino Webserver Control Lights, Relays, Servos, etc...
Best RGB LEDs for any project (WS2812, aka NeoPixels)
Bit banging step-by-step: Arduino control of WS2811, WS2812, and WS2812B RGB LEDs
MX3 - Professional LED Panel
A Raspberry Pi or Mr. Clock-workers server
Electronics Soldering Mobile Workshop
PiMSO - A Raspberry Pi based Wi-Fi Oscilloscope
Raspberry Pi solar logger
2.5D Laser Cut Gears
Arduino Laser Engraver
Drive a webpage in real-time using Arduino, SensorMonkey and Processing.js
How to Paint (without any hand skill)
Read analog data directly in Processing
10W LED driver and dimmer
Bike-Powered Rotisserie Spit
Pocket-Size Power Supply
How to Build Your Own Growing Containers
Paper iMac 4.8"
LED Cube 4x4x4
LED Cube 8x8x8