author
7CommentsJoined December 26th, 2016

Tell us about yourself!

Complete Your Profile
  • Pipe Dream: A Low Voltage Tesla Coil or 'Slayer Exciter'

    minute

    and I did not have the tubes that you said. Instead I used cfl bulbs

    I found couple of fluorescenrt tubes, and checked them as well. No result(

    Thank you sir! Let me check it. I will inform you.

    View Instructable »
  • SLAYER EXCITERS & TESLA COILS everything you need to know to get started!

    Hi. Could you explain me where I made a mistake. It does not work. I used transistor TIP41c , 22K resistor, on-off-switch, 26 awg(0.4mm) for secondary coil, 18 awg(1mm) for primary coil, approximately 200 turns for secondary coil and 2 turns for primary coil. Also I checked other transistors and resistors, they did not work either. What is wrong with this circuit? please help me. I think the problem is related to 18 awg (1mm) cable

    View Instructable »
  • Pipe Dream: A Low Voltage Tesla Coil or 'Slayer Exciter'

    Hi. Could you explain me where I made a mistake. It does not work. I used transistor TIP41c , 22K resistor, on-off-switch, 26 awg(0.4mm) for secondary coil, 18 awg(1mm) for primary coil, approximately 200 turns for secondary coil and 2 turns for primary coil. Also I checked other transistors and resistors, they did not work either. What is wrong with this circuit? please help me. I think the problem is related to 18 awg (1mm) cable

    View Instructable »