rjkorn

it only scares me because it's hard to stop eating them.....the taste is great. Far better than I ever got with baking soda and an egg wash...I need to make more soon...

for the I2C ones usually the pin config is either of these pin combos for the cheapest ebay boards I buy.I just try them both.#include <LiquidCrystal_I2C.h>// set the LCD address to 0x27 for a 20 chars 4 line display// Set the pins on the I2C chip used for LCD connections://LiquidCrystal_I2C lcd(0x27, 4, 5, 6, 0, 1, 2, 3, 7, NEGATIVE); // addr, EN, RW, RS, D4, D5, D6, D7, Backlight, POLARITYLiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); // addr, EN, RW, RS, D4, D5, D6, D7, Backlight, POLARITY

Hope I didn't make that more confusing......

My code is specific to the adafruit rgb lcd shield or a clone of its schematic...Theres 3 ways to connect that LCD.Direct using a bunch of pins.using the MCP2017 port expanderusing and i2c expander which is usually a PCF8574 chipeach way uses a different library and you still have to handle the buttons.direct is popular with clones like the sainmart LCD shield.the adafruit is a pretty solid board so I prefer it.Those I2C boards have a bunch of different wiring schemes and can give you headaches...

Hope I didn't make that more confusing......i can post the hello world test for the I2C but its a bit of work to use it in this project. Mostly the buttons and lcd library and init need to be changed...There is a two button press status screen you'll have to change or do without....

Post some pics here when you do. It will give me the nudge to make more myself....

The ones I used are tyoe K that matches the amplifier I used which is a MAX6675..try searching for "thermocouple arduino" that should get you plenty of hits for a max6675 and matching thermocouple. there are a bunch on eBay around $5 in China or $10 in the US or so on ebay. not sure about sources in Sweedenif you dont mind waiting the chinese sellers are the ones I use. I just bought some of these:http://www.ebay.com/itm/MAX6675-Module-DC-5V-K-Typ...for a toaster oven project.Still a type K but a very short nose. I like the long nose ones for the smoker...like these:http://www.ebay.com/itm/K-Type-5cm-Long-Probe-Ther...I think thats the one pictured in this ible....

Wild.... A cat house and scratch pad too...

Love it.....

Reminds me of the photo booth in police academy

I just wanna make the head for disoplay on a shelf.....

I just wanna make the head for disoplay on a shelf.....

I like making instant repair parts. someday i will put stuff on thingiverse. Right now work keeps me busy.Thanks for checking out my ibles....

that looks great!I'm thinking of trying a ukulele or banjo shape next. The banjo could even have the neck and tuning pegs

I get great deals on Craigslist. Some people will post a golf cart for $300 but after a while they take $50 just to get rid of it...Sometimes a good story helps. tell them what you want to do. bring pictures of the Instructables you're trying to duplicate and you may get a better deal.I had people bring out extra stuff and give it to me for free just to be part of it.

I love the style. If I get ambitious one day I want to try it with aluminum. Just the top part, and use it as a pedant lamp.....

really needs a speed control to limit motor current and a greased up rubber o-ring or faucet washer as a shaft seal. As for the design and execution perfect. you got my vote. I really like the battery shoe. I may use that.....

easiest thing would be to move or replace the switch. or bolt a plate over it....if you want an electrical answer google the make and model and find a wiring diagram, then post the diagram

just got all the parts together. on the bench it seems fine. Multi wii shows tilt etc..Now I have to try that phone app and then make a motor driver.I'm going with 4 mosfet's. Did you decide on a better driver yet?

I did turn up the brightness for that pic. the remote has a dimmer function to tone it down a bit....Also has some annoying flashing patterns. I'll stay away from those especially the fast flash that looks like it would cause seizures....

I like warm white inside for accent lighting. For task lighting i prefer cool white.if you go crazy you can use RGB strips and have any color you want. segment the strips for effects using a microcontroller.Or use neopixes for individual led addressing. parallel the data in to eaxh rib for some nice effects. I have to grab some pictures of a neopixel yard light I made and post another ible

Hidden danger too. A bird made a nest on top of my 500W halogen light but luckily I noticed it before I hit the power. It would have caught fire in no time.....

it's amazes me how useful it's been. Not just for emergency phone charging or USB audio dongle use but for simple bench top testing....

Thanks, I'm not sure how that happened.... i guess I had a moment of clarity...

I hate to admit it but I started installing alarms in the 70's. I guess it sticks with you....

Thanks, I didn't get much of the Bacon... I'll have to make more after the new year....

Thank You