The Glow Circuit Assembly
3D Printing With Circuits
The copper rod is self made. First made threads to the other end an then made servo connector with saw. You could use sonething like this instead: https://www.google.fi/search?q=pitk%C3%A4+mutteri&...Servo bracket is only reused from something scrap which was lying around. Can easily be replaced with something like this: https://www.google.fi/search?q=kulmarauta&rlz=1C1J...
Tools and Materials for Arduino
Your First Experiments
Project: Infinity Mirror
Setup and Print
Tools and Materials for Laser Cutting
Welcome to Laser Cutting
Fusion 360 Orientation
I made a negative extrude of the stamp on the top too. You can see the orientation of the stamp easily.
Tools + Materials for 3D Printing
Laser Cutting Class
Pasta Making Class
Raspberry Pi Class
3D Printing Class
The original cat window has been working continuously for 4 years! There has been some minor tweaking in the code (opening/closing speed of the window, better proximity sensor for outside because of sunlight), but basically "it works like the WC in a train" (finnish proverb meaning very simple and reliable design:).Current proximity sensor looking outside is similar to this:http://www.dx.com/p/diy-ir-infrared-distance-measu...Also, there is now only 2 sensors in use, because the one looking inside caused too many "wrong alarms": when someone walked beside the window, it detected the movement.
Custom Cases For Just About Anything, Recycle Used Food Packages!