loading
2Comments

Tell us about yourself!

Complete Your Profile
  • sukhmand commented on laurenk's instructable 4X4X4 LED Cube w/ Arduino Uno10 months ago
    4X4X4 LED Cube w/ Arduino Uno

    when i upload code ardino it shows thisArduino: 1.6.7 (Windows 8.1), Board: "Arduino/Genuino Uno"Sketch uses 4,234 bytes (13%) of program storage space. Maximum is 32,256 bytes.Global variables use 49 bytes (2%) of dynamic memory, leaving 1,999 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x94avrdude: stk500_recv(): ...see more »when i upload code ardino it shows thisArduino: 1.6.7 (Windows 8.1), Board: "Arduino/Genuino Uno"Sketch uses 4,234 bytes (13%) of program storage space. Maximum is 32,256 bytes.Global variables use 49 bytes (2%) of dynamic memory, leaving 1,999 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x94Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x94 This report would have more information with "Show verbose output during compilation" enabled in File > Preferences.

    when i uload sket to ardino it shows this.Arduino: 1.6.7 (Windows 8.1), Board: "Arduino/Genuino Uno"Sketch uses 4,234 bytes (13%) of program storage space. Maximum is 32,256 bytes.Global variables use 49 bytes (2%) of dynamic memory, leaving 1,999 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x94avrdude: stk500_recv(...see more »when i uload sket to ardino it shows this.Arduino: 1.6.7 (Windows 8.1), Board: "Arduino/Genuino Uno"Sketch uses 4,234 bytes (13%) of program storage space. Maximum is 32,256 bytes.Global variables use 49 bytes (2%) of dynamic memory, leaving 1,999 bytes for local variables. Maximum is 2,048 bytes.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x94Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x94avrdude: stk500_recv(): programmer is not respondingavrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x94 This report would have more information with "Show verbose output during compilation" enabled in File > Preferences.

    View Instructable »