With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Tell us about yourself!
Hi Dave Thanks for replying I'll run through some things I've done.Run two sketches on the Arduino Uno both worked correctly.Arduino LED is lit.Loaded Horus fw.ino file onto Arduino Uno/* *//* Hack file to use Arduino IDE *//* */Ran Horus auto check, camere shows chequerboard on Horus screen.Message keeps showing Please put pattern on platform - pattern not detected. Ran this a number of times in different light levels still get the same message.At this stage the motor is not turning and the lasers aren't lighting up.I must be doing something wrong.RegardsEric
Hi Dave Thanks for replyingWhat I have done so far.Set up Uno using IDE loaded to basic LED sketches both worked.Loaded Horus-Fw.ino/* *//* Hack file to use Arduino IDE *//* */Ran Horus program Auto setup, camera showing chequerboard pattern on Horus set up screen.Horus program starts and shows error message pattern not detected.run auto check again same message plus a window " Please put pattern on platform. Tried again same error messages. Tried with different light levels same problem.Stepper mor is not turning lasers aren't lit.RegardsEric
Sorry must have hit the reply twice Eric
Hi DaveI like your explanations and diagrams my problem is I am not computer friendly (born in Steam Age)I downloaded the horus-fw.ino the same sketch loop as yours. Uploaded the sketch to the arduino uno. Ran the Horus program the camera works but error message "Pattern not detected" The lasers and motor don't operate either?I would really appreciate any assistanceEric
Conclusion & Going Further
3D Milling CAM Setup - Fusion 360
Welcome to CNC
3D Printing Class
Let your inbox help you discover our best projects, classes, and contests. Instructables will help you learn how to make anything!
© 2016 Autodesk, Inc.