http://www.instructables.com Member Feed Tue, 21 May 2013 08:03:25 PDT BLOX v1.01 http://www.instructables.com/id/USB-casting-in-transparent-resin/
USB casting in transparent resin - More DIY How To Projects]]> /files/deriv/FJB/ELFN/FXA2Z9OE/FJBELFNFXA2Z9OE.SQUARE2.jpg /files/deriv/FJB/ELFN/FXA2Z9OE/FJBELFNFXA2Z9OE.SQUARE.jpg /files/deriv/FJB/ELFN/FXA2Z9OE/FJBELFNFXA2Z9OE.SMALL.jpg ECXG8OTFXA2OG40 protoman I've made a USB dongle in transparent resin. The technique used is resin casting by using a silicon mould. That's the list of items and tools used:-USB dongle, best a old one the first time, due it's a bit of risk to damage it.-LEGO pieces to make a shuttering for the silicon mould.-Modelling paste ...
By: protoman

Continue Reading »]]> technology Fri, 18 Mar 2011 14:30:43 PDT USB-casting-in-transparent-resin http://www.instructables.com/id/DIY-3D-Controller/
DIY 3D Controller - More DIY How To Projects]]> /files/deriv/F3N/FOK2/FIWH3S8O/F3NFOK2FIWH3S8O.SQUARE2.jpg /files/deriv/F3N/FOK2/FIWH3S8O/F3NFOK2FIWH3S8O.SQUARE.jpg /files/deriv/F3N/FOK2/FIWH3S8O/F3NFOK2FIWH3S8O.SMALL.jpg E0FPXU8FIWH3S8J kylemcdonald Make a 3D interface using an six resistors, aluminum foil, and an Arduino. Take that, Wii. Update: a much more thorough explanation of this project is available from Make Magazine. It might be easier to follow their instructions, and I think their code is more up to date. The basic goal here was t...
By: kylemcdonald

Continue Reading »]]> technology Sat, 25 Aug 2012 13:00:01 PDT DIY-3D-Controller http://www.instructables.com/id/DeskTop-Steam-Boiler/
DeskTop Steam Boiler - More DIY How To Projects]]> /files/deriv/FML/4RY1/GM552IN5/FML4RY1GM552IN5.SQUARE2.jpg /files/deriv/FML/4RY1/GM552IN5/FML4RY1GM552IN5.SQUARE.jpg /files/deriv/FML/4RY1/GM552IN5/FML4RY1GM552IN5.SMALL.jpg EDOHW95GM552IM8 Confounded Machine This is an instructable for my small sized steam boiler.  I wanted a solid boiler that I could use to run small steam engines, turbines or in this case a "steamfuser" which is a heated aluminum container that lets a scented liquid vaporize and be carried into the air with the rising steam...there ar...
By: Confounded Machine

Continue Reading »]]> technology Fri, 8 Apr 2011 02:37:01 PDT DeskTop-Steam-Boiler http://www.instructables.com/id/radioactive-chair/
radioactive chair - More DIY How To Projects]]> /files/deriv/FF8/MNM5/HCJOASAQ/FF8MNM5HCJOASAQ.SQUARE2.jpg /files/deriv/FF8/MNM5/HCJOASAQ/FF8MNM5HCJOASAQ.SQUARE.jpg /files/deriv/FF8/MNM5/HCJOASAQ/FF8MNM5HCJOASAQ.SMALL.jpg EXZMUFHHCJOASB3 bowlen199 so i was tasked with producing a chair for 7-8 year old children for my coursework, but me being me i wanted to be able to use it too so i decided to make it truly versatile and make a chair that could be used by almost anyone from about the age of 7 upwards. After much research and tedious design,...
By: bowlen199

Continue Reading »]]> workshop Thu, 9 May 2013 02:37:02 PDT radioactive-chair http://www.instructables.com/id/Bionic-Iron-Man-Armor-w-Sound-Effects/
Bionic Iron Man Armor (w/ Sound Effects) - More DIY How To Projects]]> /files/deriv/FBM/5ZYL/HEXSS5JC/FBM5ZYLHEXSS5JC.SQUARE2.jpg /files/deriv/FBM/5ZYL/HEXSS5JC/FBM5ZYLHEXSS5JC.SQUARE.jpg /files/deriv/FBM/5ZYL/HEXSS5JC/FBM5ZYLHEXSS5JC.SMALL.jpg E51R5KXHBXWS7U5 Gundanium In the spirit of the upcoming release of Iron Man 3, we've decided to teach you how to build some killer Stark Industries tech to show off while camping out at the front of the line of the midnight show. This Instructable will teach you how to build a Repulsor that uses one of our third-generation ...
By: Gundanium

Continue Reading »]]> technology Mon, 22 Apr 2013 06:30:04 PDT Bionic-Iron-Man-Armor-w-Sound-Effects http://www.instructables.com/id/Replica-Vintage-Motorcycle/
Replica Vintage Motorcycle - More DIY How To Projects]]> /files/deriv/FZW/QE6Q/HD4VGMOO/FZWQE6QHD4VGMOO.SQUARE2.jpg /files/deriv/FZW/QE6Q/HD4VGMOO/FZWQE6QHD4VGMOO.SQUARE.jpg /files/deriv/FZW/QE6Q/HD4VGMOO/FZWQE6QHD4VGMOO.SMALL.jpg ETC8SWWH8I449V4 liquidhandwash I've been want to build something unique for some time, something I could take to the "show us ya wheels" car show and know that no one has see one of these before. Only problem not to much space in the garage and old and unique= $. I did quite a bit of research before I started this project, and  d...
By: liquidhandwash

Continue Reading »]]> workshop Mon, 1 Apr 2013 20:30:07 PDT Replica-Vintage-Motorcycle http://www.instructables.com/id/Bulletproof-iPhone-case-with-pics/
Bulletproof iPhone case - More DIY How To Projects]]> /files/deriv/F6D/5S6H/HELWZBX1/F6D5S6HHELWZBX1.SQUARE2.jpg /files/deriv/F6D/5S6H/HELWZBX1/F6D5S6HHELWZBX1.SQUARE.jpg /files/deriv/F6D/5S6H/HELWZBX1/F6D5S6HHELWZBX1.SMALL.jpg EQF0DHDHEBN094D lockershop Applying for a job with the secret services or just protective of your iPhone? Either way this is an instructable for you.This holder can not only withstand  bullets and pellets from  low caliber guns and air rifles but is stab proof, protects your smart phone from falls, from hits by a  hammer an...
By: lockershop

Continue Reading »]]> workshop Tue, 23 Apr 2013 10:30:29 PDT Bulletproof-iPhone-case-with-pics http://www.instructables.com/id/Sheet-Metal-iPod-Case/
Sheet Metal iPod Case - More DIY How To Projects]]> /files/deriv/FOC/HP72/HD4VPHSW/FOCHP72HD4VPHSW.SQUARE2.jpg /files/deriv/FOC/HP72/HD4VPHSW/FOCHP72HD4VPHSW.SQUARE.jpg /files/deriv/FOC/HP72/HD4VPHSW/FOCHP72HD4VPHSW.SMALL.jpg EFGYWMMHD4VC59G M3G Last week I was sitting around with a couple of my friends showing off my new iPod when one of them asked if I had a case for it yet. I responded that I didn't, but it got me thinking. I decided I would make my own case. As soon as I got home I sketched up a design and after a few days of work I had...
By: M3G

Continue Reading »]]> workshop Wed, 6 Mar 2013 19:00:01 PST Sheet-Metal-iPod-Case http://www.instructables.com/id/How-to-Make-the-Metal-Melter-1/
How to Make the Metal Melter - More DIY How To Projects]]> /files/deriv/F4S/187B/HANABW3B/F4S187BHANABW3B.SQUARE2.jpg /files/deriv/F4S/187B/HANABW3B/F4S187BHANABW3B.SQUARE.jpg /files/deriv/F4S/187B/HANABW3B/F4S187BHANABW3B.SMALL.jpg EIZ305QHANAQ9IL The King of Random In this project you'll learn step by step how to modify a microwave oven transformer into a high-current device that can pump out 800 amps of electrical current. If you liked the Metal Melter you saw in a previous project, here's how you can make your own!
By: The King of Random

Continue Reading »]]> workshop Mon, 17 Dec 2012 13:00:02 PST How-to-Make-the-Metal-Melter-1 http://www.instructables.com/id/Simple-Theo-Jansen-Mechanism-based-walking-Deskbee/
Simple Theo Jansen Mechanism based walking Deskbeest - More DIY How To Projects]]> /files/deriv/FQF/EN81/HANAJ32O/FQFEN81HANAJ32O.SQUARE2.jpg /files/deriv/FQF/EN81/HANAJ32O/FQFEN81HANAJ32O.SQUARE.jpg /files/deriv/FQF/EN81/HANAJ32O/FQFEN81HANAJ32O.SMALL.jpg EZEW82XHANAJ2U3 ghostwhowalks you will need an A3 printing paper with the plan printed on it. The plan can be downloaded as PDF from the attachment here.  A4 should work too, though I havent tried. Smaller makes it difficult to work with. 1)Print the plan on A3 printing paper. Cut the legs plan out , fold at the markers, back a...
By: ghostwhowalks

Continue Reading »]]> technology Wed, 26 Dec 2012 07:30:02 PST Simple-Theo-Jansen-Mechanism-based-walking-Deskbee http://www.instructables.com/id/Make-a-bench-power-supply-mostly-from-recycled-par/
Make a bench power supply mostly from recycled parts - More DIY How To Projects]]> /files/deriv/FI2/SDPW/G33P0P58/FI2SDPWG33P0P58.SQUARE2.jpg /files/deriv/FI2/SDPW/G33P0P58/FI2SDPWG33P0P58.SQUARE.jpg /files/deriv/FI2/SDPW/G33P0P58/FI2SDPWG33P0P58.SMALL.jpg E34NQ0CG0KQM7MX newtonn2 This instructable will show you how to make a very good bench power supply using mainly recycled parts. This is the really the "mark II",  you can see "mark I" here.    When I finished my first bench power supply I was really happy, and used it very often, almost every day, until one day it decide...
By: newtonn2

Continue Reading »]]> technology Fri, 18 Mar 2011 05:30:26 PDT Make-a-bench-power-supply-mostly-from-recycled-par http://www.instructables.com/id/monoPong/
monoPong - More DIY How To Projects]]> /files/deriv/FRX/L4SX/H9G19XE6/FRXL4SXH9G19XE6.SQUARE2.jpg /files/deriv/FRX/L4SX/H9G19XE6/FRXL4SXH9G19XE6.SQUARE.jpg /files/deriv/FRX/L4SX/H9G19XE6/FRXL4SXH9G19XE6.SMALL.jpg EBRV4D1H9G0LO5F mischka When I saw this amazing 1D-Pong-Game at Hack-A-Day, I thought "What a great idea - I want to make one". In fact it is a good projects for using microcontrollers, but I also think it is a great project for using logic ICs. I am fascinated by the simplicity of these ICs, and I was wondering if I could...
By: mischka

Continue Reading »]]> technology Sat, 24 Nov 2012 00:30:01 PST monoPong http://www.instructables.com/id/two-ways-to-reset-arduino-in-software/
two ways to reset arduino in software - More DIY How To Projects]]> /files/deriv/FUR/8RKV/H94ZAYA8/FUR8RKVH94ZAYA8.SQUARE2.jpg /files/deriv/FUR/8RKV/H94ZAYA8/FUR8RKVH94ZAYA8.SQUARE.jpg /files/deriv/FUR/8RKV/H94ZAYA8/FUR8RKVH94ZAYA8.SMALL.jpg ERQMXWKH9142T61 gabriellalevine If you want to RESET Arduino from the beginning without manually pressing the RESET button, there are a few ways. Here are two ways, using minimal wiring / circuitry. 
By: gabriellalevine

Continue Reading »]]> technology Fri, 9 Nov 2012 02:37:04 PST two-ways-to-reset-arduino-in-software http://www.instructables.com/id/Gangnam-Style-Paper-Machine/
Gangnam Style Paper Machine - More DIY How To Projects]]> /files/deriv/FSP/R36T/H9G16Z3W/FSPR36TH9G16Z3W.SQUARE2.jpg /files/deriv/FSP/R36T/H9G16Z3W/FSPR36TH9G16Z3W.SQUARE.jpg /files/deriv/FSP/R36T/H9G16Z3W/FSPR36TH9G16Z3W.SMALL.gif EX3QT5FH9G10OIW kamibox.de Oppan Gangnam Style! Recently, PSY won the MTV Europe Music Award… Award for the best video. Totally justified, of course! So I thought I would hop on that train full of dancers and give to the world an idol carved from paper and glue. ***Between 24th of November and 7th of January, Santa is in t...
By: kamibox.de

Continue Reading »]]> play Mon, 6 May 2013 09:00:07 PDT Gangnam-Style-Paper-Machine http://www.instructables.com/id/Earthquake-Detector-1/
Earthquake Detector - More DIY How To Projects]]> /files/deriv/F1G/BFN2/H6S40WV1/F1GBFN2H6S40WV1.SQUARE2.jpg /files/deriv/F1G/BFN2/H6S40WV1/F1GBFN2H6S40WV1.SQUARE.jpg /files/deriv/F1G/BFN2/H6S40WV1/F1GBFN2H6S40WV1.SMALL.jpg E34ZOV8H4AGLV12 audreyobscura I grew up in California, and have had the fortune of experiencing every major earthquake in this state since I was born. I love them and fear them at the same time! Earthquakes are exciting, but also mysterious. Living in such a seismically active state, there are earthquakes all the time that most ...
By: audreyobscura

Continue Reading »]]> technology Fri, 28 Sep 2012 12:00:03 PDT Earthquake-Detector-1 http://www.instructables.com/id/How-to-win-an-arguement-with-an-authority-figure/
How to win an arguement with an authority figure - More DIY How To Projects]]> http://cdn.instructables.com/FML/GEDN/F4IX6H0Q/FMLGEDNF4IX6H0Q.SQUARE2.jpg http://cdn.instructables.com/FML/GEDN/F4IX6H0Q/FMLGEDNF4IX6H0Q.SQUARE.jpg http://cdn.instructables.com/FML/GEDN/F4IX6H0Q/FMLGEDNF4IX6H0Q.SMALL.gif E4O8LMDF42MDHNQ finfan7 You can use a couple strategies to win your basic argument with a normal person. It just takes a preset response or two and a quick wit.
By: finfan7

Continue Reading »]]> living Tue, 29 Mar 2011 17:30:46 PDT How-to-win-an-arguement-with-an-authority-figure http://www.instructables.com/id/Bioluminescent-Bacterial-Lightbulb-Water-Polluti/
Bioluminescent Bacterial Lightbulb / Water Pollution Tester - More DIY How To Projects]]> /files/deriv/FE1/A0EQ/H3Z329RJ/FE1A0EQH3Z329RJ.SQUARE2.jpg /files/deriv/FE1/A0EQ/H3Z329RJ/FE1A0EQH3Z329RJ.SQUARE.jpg /files/deriv/FE1/A0EQ/H3Z329RJ/FE1A0EQH3Z329RJ.SMALL.jpg E7GT0GHH3QF5OZQ drdan152 Bioluminescent Bacterial Lightbulb This instructable will show you how to grow and culture your own glowing bacteria and use it to reinvent the light bulb! I"ll show you how to grow your very own Vibrio phosphoreum or Vibrio fischeri from fresh sea fish (squid work well) and culture it onto specia...
By: drdan152

Continue Reading »]]> technology Sun, 19 Aug 2012 07:00:02 PDT Bioluminescent-Bacterial-Lightbulb-Water-Polluti http://www.instructables.com/id/Morse-Code-Magic-An-Algorithm/ /files/deriv/FV2/HCJB/GSLF2W5P/FV2HCJBGSLF2W5P.SQUARE2.jpg /files/deriv/FV2/HCJB/GSLF2W5P/FV2HCJBGSLF2W5P.SQUARE.jpg /files/deriv/FV2/HCJB/GSLF2W5P/FV2HCJBGSLF2W5P.SMALL.jpg EV9QGQEGS3BDMDJ RayBurne Morse Code!  Dude, that is so last century...  (More like the 1840's) Overview: Morse Code, those annoying Dits & Dahs you often hear on old military movies.  If you have a family member into Amateur Radio, a "Ham", you may have heard Morse Code on their shortwave receivers and if that Ham has b...
By: RayBurne

Continue Reading »]]> technology Sat, 8 Oct 2011 05:30:02 PDT Morse-Code-Magic-An-Algorithm http://www.instructables.com/id/Making-Glove-One-a-3D-printed-wearable-cell-p/
Making 'Glove One' - a 3D-printed, wearable cell phone. - More DIY How To Projects]]> /files/deriv/F3J/41OM/H2WEO7D8/F3J41OMH2WEO7D8.SQUARE2.jpg /files/deriv/F3J/41OM/H2WEO7D8/F3J41OMH2WEO7D8.SQUARE.jpg /files/deriv/F3J/41OM/H2WEO7D8/F3J41OMH2WEO7D8.SMALL.jpg EARJBH2H2WEO6OE Bryan Cera Hello!  I'm Bryan Cera, and I love to make weird stuff out of electronics! It is my passion. For this instructable, I'd like to take you through my process of creating Glove One, a functional cell phone that you wear on your hand. I've made a few tutorials in the past, but this is my first offi...
By: Bryan Cera

Continue Reading »]]> technology Sun, 10 Jun 2012 09:30:01 PDT Making-Glove-One-a-3D-printed-wearable-cell-p http://www.instructables.com/id/How-to-X-Ray/
How to X-Ray - More DIY How To Projects]]> /files/deriv/FDQ/Q6LE/H0OJ0MNL/FDQQ6LEH0OJ0MNL.SQUARE2.jpg /files/deriv/FDQ/Q6LE/H0OJ0MNL/FDQQ6LEH0OJ0MNL.SQUARE.jpg /files/deriv/FDQ/Q6LE/H0OJ0MNL/FDQQ6LEH0OJ0MNL.SMALL.jpg E576UR7H0OJ1UE8 grenadier So you wanna learn how to x-ray? Well then do I have some information for you!  Preface: Why did I write this instructable? Well, to have a shot at winning that objet 3D printer! And why would I want that?  To set up a hackerspace of course! There aren't any within 50 miles of my town, and that...
By: grenadier

Continue Reading »]]> technology Thu, 13 Dec 2012 06:30:02 PST How-to-X-Ray http://www.instructables.com/id/How-to-Deal-with-Noisy-Neighbors/
How to Deal with Noisy Neighbors - More DIY How To Projects]]> /files/deriv/FKE/MYN0/H2WEV0Z6/FKEMYN0H2WEV0Z6.SQUARE2.jpg /files/deriv/FKE/MYN0/H2WEV0Z6/FKEMYN0H2WEV0Z6.SQUARE.jpg /files/deriv/FKE/MYN0/H2WEV0Z6/FKEMYN0H2WEV0Z6.SMALL.jpg ETR8YKVH2WEO0WE jamilinventioins My next door neighbors have recently been playing their music really loud so that I can hear it through the walls. I've gotten tired of having to bang on the walls each time to get them to quiet down, so I decided to automate some payback. The premise is that my device will listen for loud music pla...
By: jamilinventioins

Continue Reading »]]> technology Mon, 4 Jun 2012 02:37:03 PDT How-to-Deal-with-Noisy-Neighbors http://www.instructables.com/id/How-to-Build-a-Slayer-Exciter/
How to Build a Slayer Exciter - More DIY How To Projects]]> /files/deriv/FI4/6FSJ/H2TJ4GZG/FI46FSJH2TJ4GZG.SQUARE2.jpg /files/deriv/FI4/6FSJ/H2TJ4GZG/FI46FSJH2TJ4GZG.SQUARE.jpg /files/deriv/FI4/6FSJ/H2TJ4GZG/FI46FSJH2TJ4GZG.SMALL.jpg E2KHP3KH2MYKE5V Chip Fixes A Slayer Exciter is an air-cored transformer that steps up a very low DC voltage to a very high AC voltage. This creates an electromagnetic field around the coil that is capable of lighting up fluorescent and neon light bulbs. It is fairly similar to a Tesla Coil. The Slayer Exciter was the brainst...
By: Chip Fixes

Continue Reading »]]> technology Sun, 5 May 2013 16:00:04 PDT How-to-Build-a-Slayer-Exciter http://www.instructables.com/id/Arduino-Nano-based-Microbot/
Arduino Nano based Microbot - More DIY How To Projects]]> /files/deriv/FO5/NZSN/H1KHA8CR/FO5NZSNH1KHA8CR.SQUARE2.jpg /files/deriv/FO5/NZSN/H1KHA8CR/FO5NZSNH1KHA8CR.SQUARE.jpg /files/deriv/FO5/NZSN/H1KHA8CR/FO5NZSNH1KHA8CR.SMALL.jpg EES4QCVH1O5DFQ4 PaulMakesThings This instructable was created to be entered in the Robot Challenge. If I win, the parts will of course, go into robots like this one. Notes on how to include some of the very components in the prize packages are given in the last step. I am 28, so of course, I'm not going for the student prizes. I ...
By: PaulMakesThings

Continue Reading »]]> technology Wed, 16 May 2012 10:30:02 PDT Arduino-Nano-based-Microbot http://www.instructables.com/id/How-to-Build-an-8-Bit-Computer/
How to Build an 8-Bit Computer - More DIY How To Projects]]> /files/deriv/F5C/AWI5/H1KHA9ZO/F5CAWI5H1KHA9ZO.SQUARE2.jpg /files/deriv/F5C/AWI5/H1KHA9ZO/F5CAWI5H1KHA9ZO.SQUARE.jpg /files/deriv/F5C/AWI5/H1KHA9ZO/F5CAWI5H1KHA9ZO.SMALL.jpg ENXX61RH1JUH5KE spel3o Building an 8-bit TTL computer sounds like a daunting and complicated task, or at least it did to me when I started out on my journey to understand the architecture of a basic CPU. When it comes down to it, a CPU is fairly simple in operation once you learn the fundamentals behind all of its process...
By: spel3o

Continue Reading »]]> technology Mon, 11 Mar 2013 23:00:02 PDT How-to-Build-an-8-Bit-Computer http://www.instructables.com/id/super-simple-ignition-coil-drivers/
Super Simple ignition coil drivers - More DIY How To Projects]]> /files/deriv/FFU/882X/GC4G15F4/FFU882XGC4G15F4.SQUARE2.jpg /files/deriv/FFU/882X/GC4G15F4/FFU882XGC4G15F4.SQUARE.jpg /files/deriv/FFU/882X/GC4G15F4/FFU882XGC4G15F4.SMALL.jpg EMRTC1NG5X4MCGG -max-
By: -max-

Continue Reading »]]> technology Sun, 24 Mar 2013 14:30:02 PDT super-simple-ignition-coil-drivers http://www.instructables.com/id/Build-a-SpurtBot-Line-Follower/
Build a SpurtBot Line Follower - More DIY How To Projects]]> /files/deriv/FSG/IBY2/GSLF2SXK/FSGIBY2GSLF2SXK.SQUARE2.jpg /files/deriv/FSG/IBY2/GSLF2SXK/FSGIBY2GSLF2SXK.SQUARE.jpg /files/deriv/FSG/IBY2/GSLF2SXK/FSGIBY2GSLF2SXK.SMALL.jpg ES3U70WGSLF2SWB ignoblegnome NOTE: Before you decide to build this robot, please read my newer Instructable on building a SpurtBot Shadow Runner robot. The new design uses a solderless breadboard, so after you build the robot, you can experiment with your own circuits to control the robot in new ways. OK, carry on. SPURT s...
By: ignoblegnome

Continue Reading »]]> technology Wed, 9 Jan 2013 21:00:01 PST Build-a-SpurtBot-Line-Follower http://www.instructables.com/id/Coilgun-Handgun/
Coilgun Handgun - More DIY How To Projects]]> /files/deriv/FL8/M4CF/FNZAEMIB/FL8M4CFFNZAEMIB.SQUARE2.jpg /files/deriv/FL8/M4CF/FNZAEMIB/FL8M4CFFNZAEMIB.SQUARE.jpg /files/deriv/FL8/M4CF/FNZAEMIB/FL8M4CFFNZAEMIB.SMALL.jpg E5U4B6FF8Y3W8I3 rwilsford07 Learn how to make a simple coilgun using only a few parts that are fairly easy to obtain. Be Willing to spend more than a week on this and you might need a few heavy power tools (Only to make good projectiles). I built my first one in only a week after I had all the parts. Coilgun Principal: Coilgu...
By: rwilsford07

Continue Reading »]]> technology Tue, 19 Feb 2013 13:00:07 PST Coilgun-Handgun http://www.instructables.com/id/Virus-Prank-2/
Virus Prank 2 - More DIY How To Projects]]> /files/deriv/FB3/8WJV/FEAHE6UA/FB38WJVFEAHE6UA.SQUARE2.jpg /files/deriv/FB3/8WJV/FEAHE6UA/FB38WJVFEAHE6UA.SQUARE.jpg /files/deriv/FB3/8WJV/FEAHE6UA/FB38WJVFEAHE6UA.SMALL.jpg ESR4DG6FEAHE6UC Shadow Dragon I have made another prank that I think you will like. It is just an offline webpage, and it is very simple. This Instructable is kind of similar to http://www.instructables.com/id/Virus-Prank/.
By: Shadow Dragon

Continue Reading »]]> technology Sun, 27 Mar 2011 06:30:21 PDT Virus-Prank-2 http://www.instructables.com/id/A-Beginners-Guide-to-Programmable-Logic-Devices/
A Beginners Guide to Programmable Logic Devices - More DIY How To Projects]]> /files/deriv/FC5/LBTH/G9ZE99C1/FC5LBTHG9ZE99C1.SQUARE2.jpg /files/deriv/FC5/LBTH/G9ZE99C1/FC5LBTHG9ZE99C1.SQUARE.jpg /files/deriv/FC5/LBTH/G9ZE99C1/FC5LBTHG9ZE99C1.SMALL.jpg E2B6AUNG9NHHIRP powerguy I put this instructable together after noticing that there really isn’t anything on the website about programmable logic except for one question and one instructable about a programmer (see links below).  http://www.instructables.com/answers/Whats-an-FPGA-Whats-an-CPLD/  http://www.instructabl...
By: powerguy

Continue Reading »]]> technology Thu, 24 Mar 2011 20:00:22 PDT A-Beginners-Guide-to-Programmable-Logic-Devices http://www.instructables.com/id/DIY-Electron-Accelerator-A-Cathode-Ray-Tube-in-a-/
DIY Electron Accelerator: A Cathode Ray Tube in a Wine Bottle - More DIY How To Projects]]> /files/deriv/FFY/39OD/GRFMV8TV/FFY39ODGRFMV8TV.SQUARE2.jpg /files/deriv/FFY/39OD/GRFMV8TV/FFY39ODGRFMV8TV.SQUARE.jpg /files/deriv/FFY/39OD/GRFMV8TV/FFY39ODGRFMV8TV.SMALL.jpg ESAG2MQGRD95NJK Xellers Learn how to build your own subatomic particle accelerator in a weekend! This simple project will allow you to investigate a variety of intriguing effects including magnetic deflection of an electron beam, Crookes dark space, plasma striations in a gas discharge tube, and many others. It can easily ...
By: Xellers

Continue Reading »]]> technology Sat, 3 Sep 2011 12:30:04 PDT DIY-Electron-Accelerator-A-Cathode-Ray-Tube-in-a-