loading
4 Comments

Tell us about yourself!

Complete Your Profile
  • ukwanderer commented on IamWe's instructable Camper in a box2 months ago
    Camper in a box

    Great instructions. I use a similar idea without sleeping platform. It was made in a hurry to fit in my Landrover Discovery. That was about 10 years ago. It sat outside under a tarp for three years and I used it for a recent holiday in Scotland. Mine was painted in a very practical waterbased black paint. Its an easy paint to add to whenever it needs tidying up.I used it last week in the back of a citroen Picasso. The only changes I made were two drawers at the bottom for cutlery etc. I see under your bowl that you do not have a shelf. This Is easy enought to add too provided you have the height above bowl to waterbottle. Cut a piece of plywood to fit in space. Use your brilliant idea with the aluminium angle to trap it down. Might need to put a couple of coins to make spacers. These yo...see more »Great instructions. I use a similar idea without sleeping platform. It was made in a hurry to fit in my Landrover Discovery. That was about 10 years ago. It sat outside under a tarp for three years and I used it for a recent holiday in Scotland. Mine was painted in a very practical waterbased black paint. Its an easy paint to add to whenever it needs tidying up.I used it last week in the back of a citroen Picasso. The only changes I made were two drawers at the bottom for cutlery etc. I see under your bowl that you do not have a shelf. This Is easy enought to add too provided you have the height above bowl to waterbottle. Cut a piece of plywood to fit in space. Use your brilliant idea with the aluminium angle to trap it down. Might need to put a couple of coins to make spacers. These you can take out after riveting. Could cut a couple of holes near the front corners . These are for putting a finger in to pull shelf out. You can get bowls that collapse for space saving. I also use a duracell inverter for charging phones or laptops whilst driving only. Add on a 12v kettle even though I have two burner gas rings and a also a 12v lunchbox oven and your good to go.

    View Instructable »