Instructables: throwies - popular http://www.instructables.com Sat, 3 Dec 2016 03:56:39 PST BLOX v1.01 Running a Unipolar Stepper Motor with a Bipolar Driver http://www.instructables.com/id/Running-a-Unipolar-Stepper-Motor-with-a-Bipolar-Dr/
Running a Unipolar Stepper Motor with a Bipolar Driver - More DIY How To Projects]]> https://cdn.instructables.com/F43/G1KU/HD4VOTHY/F43G1KUHD4VOTHY.SQUARE2.jpg https://cdn.instructables.com/F43/G1KU/HD4VOTHY/F43G1KUHD4VOTHY.SQUARE.jpg https://cdn.instructables.com/F43/G1KU/HD4VOTHY/F43G1KUHD4VOTHY.SMALL.jpg pieterjlouw So I gutted an old printer last night and found a few rods, motors and gears for my parts stockpile. I started typing motor details into Google and identified the one as being a 12V stepper, but the datasheet is very limited. From the 6 pins I realized it has to be a Unipolar motor. I started testi...
By: pieterjlouw

Continue Reading »]]>
Sun, 17 Feb 2013 04:22:22 PST
How To Sculpt A Goblin Face Into A Pumpkin http://www.instructables.com/id/How-to-Sculpt-a-Goblin-Face-Into-a-Pumpkin/
How To Sculpt A Goblin Face Into A Pumpkin - More DIY How To Projects]]> https://cdn.instructables.com/F8Y/3618/IUKEP1SR/F8Y3618IUKEP1SR.SQUARE2.jpg https://cdn.instructables.com/F8Y/3618/IUKEP1SR/F8Y3618IUKEP1SR.SQUARE.jpg https://cdn.instructables.com/F8Y/3618/IUKEP1SR/F8Y3618IUKEP1SR.SMALL.jpg Steven K Smith Props Hey everyone SKS Props back again with something a little different this time a pumpkin carving/sculpture! This was my first attempt at sculpting a pumpkin but I will say that I had fun I learned a lot! Hopefully some of these steps will help you in your own future pumpkin carving projects.As far a...
By: Steven K Smith Props

Continue Reading »]]>
Sat, 22 Oct 2016 17:13:58 PDT
Run a laptop of some old batteries http://www.instructables.com/id/Tech-demo.%3a-Run-a-laptop-of-any-battery/
Run a laptop of some old batteries - More DIY How To Projects]]> https://cdn.instructables.com/FS8/YUNF/F1A4XZPV/FS8YUNFF1A4XZPV.SQUARE2.jpg https://cdn.instructables.com/FS8/YUNF/F1A4XZPV/FS8YUNFF1A4XZPV.SQUARE.jpg https://cdn.instructables.com/FS8/YUNF/F1A4XZPV/FS8YUNFF1A4XZPV.SMALL.jpg ll.13 This Tech. demonstration is to raise awareness that laptop batteries can easily be replaced with any other kind providing it is of correct, or sufficient, voltage. Here I am using two 6V. batteries rigged up to provide twice the voltage to power a Compaq Armada 110.*Depending on your laptop warranty...
By: ll.13

Continue Reading »]]>
Wed, 9 May 2007 11:20:22 PDT
Easy Spaghetti Straps http://www.instructables.com/id/Easy-Spaghetti-Straps/
Easy Spaghetti Straps - More DIY How To Projects]]> https://cdn.instructables.com/FK9/MSD0/I9OSLO8Z/FK9MSD0I9OSLO8Z.SQUARE2.jpg https://cdn.instructables.com/FK9/MSD0/I9OSLO8Z/FK9MSD0I9OSLO8Z.SQUARE.jpg https://cdn.instructables.com/FK9/MSD0/I9OSLO8Z/FK9MSD0I9OSLO8Z.SMALL.jpg seeblack Spaghetti straps can be hard to turn inside out, especially very narrow ones like the ones on this dress from Parasite Eve. Using this simple technique will make it more painless than you ever thought possible! This is especially great if you don't have a loop turner, or if you can't find yours at 4...
By: seeblack

Continue Reading »]]>
Thu, 14 May 2015 15:18:15 PDT
Heavy duty portable charger for usb devices (phones, iPad, etc.) http://www.instructables.com/id/Heavy-duty-portable-charger-for-usb-devices-phone/
Heavy duty portable charger for usb devices (phones, iPad, etc.) - More DIY How To Projects]]> https://cdn.instructables.com/FDI/NVQR/G8LWTBT0/FDINVQRG8LWTBT0.SQUARE2.jpg https://cdn.instructables.com/FDI/NVQR/G8LWTBT0/FDINVQRG8LWTBT0.SQUARE.jpg https://cdn.instructables.com/FDI/NVQR/G8LWTBT0/FDINVQRG8LWTBT0.SMALL.jpg meseta Ever needed to charge your phone on the go? Can't find a wall socket to charge your iPod? Whenever I'm away from home for an extended period of time, I would charge my phone and mp3 player from my laptop.  This way, I get about 3 or 4 full charges out of the laptop battery and I could leave the pho...
By: meseta

Continue Reading »]]>
Sat, 1 May 2010 13:39:49 PDT
How To Build A Gaming Keypad http://www.instructables.com/id/How-To-Build-A-Gaming-Keypad/
How To Build A Gaming Keypad - More DIY How To Projects]]> https://cdn.instructables.com/FGO/RCJZ/IEB7Z2ZE/FGORCJZIEB7Z2ZE.SQUARE2.jpg https://cdn.instructables.com/FGO/RCJZ/IEB7Z2ZE/FGORCJZIEB7Z2ZE.SQUARE.jpg https://cdn.instructables.com/FGO/RCJZ/IEB7Z2ZE/FGORCJZIEB7Z2ZE.SMALL.jpg Mr Tesla This Instructable will show how to build a gaming keypad out of a Logitech controller. This was designed for League of Legends (or, so as not to alienate anyone, DOTA), but it will work for any game (I've done quite a bit of Starcraft with it as well). The examples for key setup will be for League t...
By: Mr Tesla

Continue Reading »]]>
Tue, 8 Sep 2015 11:49:10 PDT
Webcam mod for Astrophotography http://www.instructables.com/id/Webcam-mod-for-Astrophotography/
Webcam mod for Astrophotography - More DIY How To Projects]]> https://cdn.instructables.com/F0P/7VDK/IEB86YU1/F0P7VDKIEB86YU1.SQUARE2.jpg https://cdn.instructables.com/F0P/7VDK/IEB86YU1/F0P7VDKIEB86YU1.SQUARE.jpg https://cdn.instructables.com/F0P/7VDK/IEB86YU1/F0P7VDKIEB86YU1.SMALL.jpg Mojo_JoJo I recently bought a Celestron Astromaster 130EQ, after taking it out a couple of times I soon realized I wanted to take photographs and share with friends. After reading up on astrophotography I was disappointed to find that most of the information on moding a webcam was based on the long discontinu...
By: Mojo_JoJo

Continue Reading »]]>
Wed, 9 Sep 2015 12:10:34 PDT
Bootloading ATmega328 with Arduino Mega2560 http://www.instructables.com/id/Bootloading-ATmega328-with-Arduino-Mega2560/
Bootloading ATmega328 with Arduino Mega2560 - More DIY How To Projects]]> https://cdn.instructables.com/FFG/97ZN/HHS9LP99/FFG97ZNHHS9LP99.SQUARE2.jpg https://cdn.instructables.com/FFG/97ZN/HHS9LP99/FFG97ZNHHS9LP99.SQUARE.jpg https://cdn.instructables.com/FFG/97ZN/HHS9LP99/FFG97ZNHHS9LP99.SMALL.jpg verdelj Today we are going to burn a bootloader in to ATMega328PU using an Arduino Mega 2560. This method can also be used on the ATMega8 16PU and other microcontrollers.     Parts List:  1xATmega328 1xArduino Mega 2560 1x 16Mhz Crystal 1 x 100uF capacitor 2 x 22pF capacitors 1 x 1k Ohm resisto...
By: verdelj

Continue Reading »]]>
Sun, 16 Jun 2013 13:34:11 PDT
Arduino Nixie Tube Clock - Version 1.0 http://www.instructables.com/id/Arduino-Nixie-Tube-Clock-Version-10/
Arduino Nixie Tube Clock - Version 1.0 - More DIY How To Projects]]> https://cdn.instructables.com/F1U/ZKQK/IVO5BQTD/F1UZKQKIVO5BQTD.SQUARE2.jpg https://cdn.instructables.com/F1U/ZKQK/IVO5BQTD/F1UZKQKIVO5BQTD.SQUARE.jpg https://cdn.instructables.com/F1U/ZKQK/IVO5BQTD/F1UZKQKIVO5BQTD.SMALL.jpg esper2142 Love retrotech? Think nixie tubes are totally rad, and you want to make a thing out of them? Well, have I got news for you! You're in luck - because that's exactly what we're going to do!You will need the following for the clock itself: 1x Arduino Uno (or clone like this) 4x Arduino Compatible...
By: esper2142

Continue Reading »]]>
Mon, 28 Nov 2016 19:51:40 PST
How to install Left 4 Dead Skins http://www.instructables.com/id/How-to-install-Left-4-Dead-Skins/
How to install Left 4 Dead Skins - More DIY How To Projects]]> https://cdn.instructables.com/FPK/208Y/FQSWZOAP/FPK208YFQSWZOAP.SQUARE2.jpg https://cdn.instructables.com/FPK/208Y/FQSWZOAP/FPK208YFQSWZOAP.SQUARE.jpg https://cdn.instructables.com/FPK/208Y/FQSWZOAP/FPK208YFQSWZOAP.SMALL.jpg Father Christmas The process is rather complicated. At least in comparison to other steam games. Go to any site where the skins are available for download. My personal favourite is FPSBANANA. Find a skin you want and download it. For this, I will use this awesome skin for the Tank. http://www.fpsbanana.com/skins...
By: Father Christmas

Continue Reading »]]>
Sat, 7 Feb 2009 14:10:50 PST
PVC Saxophone! http://www.instructables.com/id/PVC-Saxophone-1/
PVC Saxophone! - More DIY How To Projects]]> https://cdn.instructables.com/FAX/1327/IRW2403Y/FAX1327IRW2403Y.SQUARE2.jpg https://cdn.instructables.com/FAX/1327/IRW2403Y/FAX1327IRW2403Y.SQUARE.jpg https://cdn.instructables.com/FAX/1327/IRW2403Y/FAX1327IRW2403Y.SMALL.jpg The Oakland Toy Lab The easiest way to be the best in the world at an instrument is to play one that nobody else knew existed. With sounds from your personally pitched plastic that are a mix between John Coltrane a flock of wild geese, you'll be playing in no time. I like this project as an introduction to the physics ...
By: The Oakland Toy Lab

Continue Reading »]]>
Mon, 15 Aug 2016 09:07:03 PDT
Da Vinci Popsicle Stick Bridge http://www.instructables.com/id/Da-Vinci-Popsicle-Stick-Bridge/
Da Vinci Popsicle Stick Bridge - More DIY How To Projects]]> https://cdn.instructables.com/FK7/IIY4/IGV4GICC/FK7IIY4IGV4GICC.SQUARE2.jpg https://cdn.instructables.com/FK7/IIY4/IGV4GICC/FK7IIY4IGV4GICC.SQUARE.jpg https://cdn.instructables.com/FK7/IIY4/IGV4GICC/FK7IIY4IGV4GICC.SMALL.jpg Maker Studio Make a self supporting bridge with no mechanical fasteners or adhesives based on one of Leonardo Da Vinci's designs. You will be weaving the sticks together so that the tension between the sticks keeps the bridge together and lifts it off of the ground. You need:Jumbo popsicle sticks (colorful one...
By: Maker Studio

Continue Reading »]]>
Thu, 12 Nov 2015 07:14:23 PST
pvc "TOOTOPHONE" -- a musical reed instrument http://www.instructables.com/id/pvc-TOOTOPHONE-a-musical-reed-instrument/
pvc "TOOTOPHONE" -- a musical reed instrument - More DIY How To Projects]]> https://cdn.instructables.com/FBU/8WVQ/G4JNRIZ8/FBU8WVQG4JNRIZ8.SQUARE2.jpg https://cdn.instructables.com/FBU/8WVQ/G4JNRIZ8/FBU8WVQG4JNRIZ8.SQUARE.jpg https://cdn.instructables.com/FBU/8WVQ/G4JNRIZ8/FBU8WVQG4JNRIZ8.SMALL.jpg Thinkenstein This is the first of an evolving series of tootophones that I have made.  I leave it up for historical interest, but suggest you try the "Tiny Tootophone"  for the basic mouthpiece, and the "Tootophone Sax and Trumpet" for some interesting body variations using x-ray film.  This PVC design is not ev...
By: Thinkenstein

Continue Reading »]]>
Wed, 20 Jan 2010 18:59:45 PST
Fresh Air Intake for a Woodstove or Wood Heater w/ Round Intake http://www.instructables.com/id/Fresh-Air-Intake-for-a-Woodstove-or-Wood-Heater-w/
Fresh Air Intake for a Woodstove or Wood Heater w/ Round Intake - More DIY How To Projects]]> https://cdn.instructables.com/FQO/XJEO/FTO53SR3/FQOXJEOFTO53SR3.SQUARE2.jpg https://cdn.instructables.com/FQO/XJEO/FTO53SR3/FQOXJEOFTO53SR3.SQUARE.jpg https://cdn.instructables.com/FQO/XJEO/FTO53SR3/FQOXJEOFTO53SR3.SMALL.jpg Davetech - Lots of people don't realize it, but when you use a heating appliance that is vented to the outside, every cubic foot of air that goes up and out the stack has to be replaced in the room. With the regular old fireplaces and pot belly stoves we know and love, that replacement air is going to be man...
By: Davetech

Continue Reading »]]>
Sun, 19 Apr 2009 17:13:09 PDT
How to upcycle (AKA felt/full) a wool sweater http://www.instructables.com/id/How-to-upcycle-AKA-feltfull-a-wool-sweater/
How to upcycle (AKA felt/full) a wool sweater - More DIY How To Projects]]> https://cdn.instructables.com/FA7/F0ZW/GWF5UMIX/FA7F0ZWGWF5UMIX.SQUARE2.jpg https://cdn.instructables.com/FA7/F0ZW/GWF5UMIX/FA7F0ZWGWF5UMIX.SQUARE.jpg https://cdn.instructables.com/FA7/F0ZW/GWF5UMIX/FA7F0ZWGWF5UMIX.SMALL.jpg MaryT8M I'm sure if you've owned at least one wool sweater, you (or someone else) have mistakenly thrown it into the washer, and when it was done your once adult sized sweater was shrunken down to kid size. THAT, my friend is the art of felting, or more correctly "fulling" (all though I see the word felting...
By: MaryT8M

Continue Reading »]]>
Tue, 3 Jan 2012 20:54:29 PST
How to play the ABC game on a road trip. http://www.instructables.com/id/How-to-play-the-ABC-game-on-a-road-trip/
How to play the ABC game on a road trip. - More DIY How To Projects]]> https://cdn.instructables.com/FGQ/XFFJ/GO4ZU6E5/FGQXFFJGO4ZU6E5.SQUARE2.jpg https://cdn.instructables.com/FGQ/XFFJ/GO4ZU6E5/FGQXFFJGO4ZU6E5.SQUARE.jpg https://cdn.instructables.com/FGQ/XFFJ/GO4ZU6E5/FGQXFFJGO4ZU6E5.SMALL.jpg solemnraven This Instructable is to teach you how to play various different ways of the ABC game while you are on a road trip. You may have already heard or played this game before but if you haven't this Instructable is for you!  I almost always play this when I am on a road trip, it's seriously fun for all a...
By: solemnraven

Continue Reading »]]>
Wed, 25 May 2011 19:18:22 PDT
Make your own emoji pillow http://www.instructables.com/id/Make-your-own-emoji-pillow/
Make your own emoji pillow - More DIY How To Projects]]> https://cdn.instructables.com/FRN/4O2C/IHTEWM9B/FRN4O2CIHTEWM9B.SQUARE2.jpg https://cdn.instructables.com/FRN/4O2C/IHTEWM9B/FRN4O2CIHTEWM9B.SQUARE.jpg https://cdn.instructables.com/FRN/4O2C/IHTEWM9B/FRN4O2CIHTEWM9B.SMALL.jpg gmpen Oh, the beauty that is the emoji. Choose from 3 different patterns and make your own emoji pillow! Or give it as a gift!Visit my blog makerinthemaking.wordpress.com for more crafting ideas and my adventures in DIY. Materials You will need:1. 1 package of yellow felt material (36 in x 36 in) 2. 1 ...
By: gmpen

Continue Reading »]]>
Sat, 5 Dec 2015 20:31:56 PST
How to control Stunning RGB LED Strip using Arduino Nano http://www.instructables.com/id/How-to-Control-Stunning-RGB-LED-Strip-Using-Arduin/
How to control Stunning RGB LED Strip using Arduino Nano - More DIY How To Projects]]> https://cdn.instructables.com/FT7/6SO7/IQFCG7E2/FT76SO7IQFCG7E2.SQUARE2.jpg https://cdn.instructables.com/FT7/6SO7/IQFCG7E2/FT76SO7IQFCG7E2.SQUARE.jpg https://cdn.instructables.com/FT7/6SO7/IQFCG7E2/FT76SO7IQFCG7E2.SMALL.gif vividz None of us could deny the fact that we would love with to play with LED’s and lighting stuffs. I love to play with LED’s and create attractive lighting effects. This project was a result of such attempt where i created a stunning RGB light effects using the popular development platform Arduino Nan...
By: vividz

Continue Reading »]]>
Mon, 11 Jul 2016 04:26:09 PDT
Felt balls from knitting wool for a chunky bead necklace http://www.instructables.com/id/Felt-balls-from-knitting-wool-for-a-chunky-bead-ne/
Felt balls from knitting wool for a chunky bead necklace - More DIY How To Projects]]> https://cdn.instructables.com/F10/NGCB/H05Y7V84/F10NGCBH05Y7V84.SQUARE2.jpg https://cdn.instructables.com/F10/NGCB/H05Y7V84/F10NGCBH05Y7V84.SQUARE.jpg https://cdn.instructables.com/F10/NGCB/H05Y7V84/F10NGCBH05Y7V84.SMALL.jpg Yorkshire Lass This is a beginner's felting project that uses up oddments of yarn to produce spherical beads that can then be made into a necklace or bracelet.  The beauty of using yarn is that it is easy to get beads of the same size by measuring the same length of yarn for each one.   And it's a lot easier to co...
By: Yorkshire Lass

Continue Reading »]]>
Sun, 1 Apr 2012 04:09:42 PDT
Tinker's Word Clock - REVISITED! NOW 110% more AWESOME (Clean and easy to make) http://www.instructables.com/id/Tinkers-Word-Clock-REVISITED-NOW-110-More-AWESOME-/
Tinker's Word Clock - REVISITED! NOW 110% more AWESOME (Clean and easy to make) - More DIY How To Projects]]> https://cdn.instructables.com/FQH/Q9GO/IVO3X06L/FQHQ9GOIVO3X06L.SQUARE2.jpg https://cdn.instructables.com/FQH/Q9GO/IVO3X06L/FQHQ9GOIVO3X06L.SQUARE.jpg https://cdn.instructables.com/FQH/Q9GO/IVO3X06L/FQHQ9GOIVO3X06L.SMALL.jpg TinkerElectric Hi, I'm John. I have been tinkering with Word Clocks for years. There is only one thing I like more than making word clocks… it’s designing them so that they are easy to put together. This tutorial will go through my latest version (5!!!!!). By the end of it you will have a clock with:User selectabl...
By: TinkerElectric

Continue Reading »]]>
Wed, 23 Nov 2016 23:23:48 PST
Arduino micro Quadcopter http://www.instructables.com/id/Arduino-micro-Quadcopter/
Arduino micro Quadcopter - More DIY How To Projects]]> https://cdn.instructables.com/FE9/JAOX/IGL8J3KP/FE9JAOXIGL8J3KP.SQUARE2.jpg https://cdn.instructables.com/FE9/JAOX/IGL8J3KP/FE9JAOXIGL8J3KP.SQUARE.jpg https://cdn.instructables.com/FE9/JAOX/IGL8J3KP/FE9JAOXIGL8J3KP.SMALL.jpg Montvydas (ONGOING Project, currently need to solder the circuit)This is Arduino based, 3D printed micro Quadcopter project for 8.5 mm diameter DC motors. However if you have some experience (or just have an hour of free time) you can adapt the design to fit to a different size motors.I am doing this during m...
By: Montvydas

Continue Reading »]]>
Wed, 4 Nov 2015 17:14:44 PST
Predator Helmet http://www.instructables.com/id/material-list-Predator-Helmet/
Predator Helmet - More DIY How To Projects]]> https://cdn.instructables.com/FBW/T1O4/GFRWQQAL/FBWT1O4GFRWQQAL.SQUARE2.jpg https://cdn.instructables.com/FBW/T1O4/GFRWQQAL/FBWT1O4GFRWQQAL.SQUARE.jpg https://cdn.instructables.com/FBW/T1O4/GFRWQQAL/FBWT1O4GFRWQQAL.SMALL.jpg manguy1 turtle shell motorcycle helmet cardboard (pizza box) frisbee water hose duct tape rope light weight clay hot glue gun arranging the items 1.  Cut a hole in the frisbee, glue on top of the helmet. 2. Cut water hose to side, cut down the length to split open and wrap around the frisbee and helmet....
By: manguy1

Continue Reading »]]>
Wed, 3 Nov 2010 14:21:39 PDT
Air Can from Empty Refrigerant Can http://www.instructables.com/id/Air-Can-from-Empty-Refrigerant-Can/
Air Can from Empty Refrigerant Can - More DIY How To Projects]]> https://cdn.instructables.com/FZ5/VR46/WBHEP282CWC/FZ5VR46WBHEP282CWC.SQUARE2.jpg https://cdn.instructables.com/FZ5/VR46/WBHEP282CWC/FZ5VR46WBHEP282CWC.SQUARE.jpg https://cdn.instructables.com/FZ5/VR46/WBHEP282CWC/FZ5VR46WBHEP282CWC.SMALL.jpg TimAnderson Nice for filling up air mattresses, bike tires, blowing dust out of your computer, etc etc. This is a useful thing to have. If you ever get your car stuck in soft sand, snow, or mud, there's an easy way to get out. Just let air out of your tires til they're at about 10 or 15 psi. They'll have a nic...
By: TimAnderson

Continue Reading »]]>
Sun, 25 Jun 2006 04:03:32 PDT
Easy Installation Guide: Volkswagen LED Interior Light Kit http://www.instructables.com/id/Easy-Installation-Guide-Volkswagen-LED-Interior-Li/
Easy Installation Guide: Volkswagen LED Interior Light Kit - More DIY How To Projects]]> https://cdn.instructables.com/FWZ/85G8/HTZY55HJ/FWZ85G8HTZY55HJ.SQUARE2.jpg https://cdn.instructables.com/FWZ/85G8/HTZY55HJ/FWZ85G8HTZY55HJ.SQUARE.jpg https://cdn.instructables.com/FWZ/85G8/HTZY55HJ/FWZ85G8HTZY55HJ.SMALL.jpg ilovejdmtoy This installation guide shows you how to replace the stock interior lighting in your Volkswagen with a new LED exact fit interior light package. This LED package is compatible with the 2012+ Passat, 2008+ CC, 2009+ Golf or GTi. The installation is very simple and would be a great addition to your ...
By: ilovejdmtoy

Continue Reading »]]>
Mon, 14 Apr 2014 14:43:57 PDT
Paracord Dog Harness http://www.instructables.com/id/Paracord-Dog-Harness/
Paracord Dog Harness - More DIY How To Projects]]> https://cdn.instructables.com/F9J/0NIR/HJUWS3J3/F9J0NIRHJUWS3J3.SQUARE2.jpg https://cdn.instructables.com/F9J/0NIR/HJUWS3J3/F9J0NIRHJUWS3J3.SQUARE.jpg https://cdn.instructables.com/F9J/0NIR/HJUWS3J3/F9J0NIRHJUWS3J3.SMALL.jpg To-Rail Had a bit of paracord on my hands and felt like my dog needed a new harness. His collar was a bit too uncomfortable for him which led me to create a harness to transfer the applied force so he wouldn't feel choked every time I tugged on the leash. As an added bonus, I gave him a little more style :)...
By: To-Rail

Continue Reading »]]>
Sun, 4 Aug 2013 17:45:49 PDT
3D Modeling of Simple Objects in SolidWorks http://www.instructables.com/id/3D-Modeling-of-Simple-Objects-in-SolidWorks/
3D Modeling of Simple Objects in SolidWorks - More DIY How To Projects]]> https://cdn.instructables.com/FJI/5MWX/GKS0RV7N/FJI5MWXGKS0RV7N.SQUARE2.jpg https://cdn.instructables.com/FJI/5MWX/GKS0RV7N/FJI5MWXGKS0RV7N.SQUARE.jpg https://cdn.instructables.com/FJI/5MWX/GKS0RV7N/FJI5MWXGKS0RV7N.SMALL.jpg i a n SolidWorks is a powerful 3D CAD modeling software developed by Dassault Systèmes SolidWorks Corp. for use on Microsoft Windows. SolidWorks is a good introduction to 3D CAD as it is easy to learn, powerful, and the most popular 3D CAD software in industry. For this tutorial we will be using SolidWor...
By: i a n

Continue Reading »]]>
Thu, 3 Mar 2011 17:48:21 PST
Temperature sensor output values on Android smartphone http://www.instructables.com/id/Temperature-sensor-output-values-on-Android-smartp/
Temperature sensor output values on Android smartphone - More DIY How To Projects]]> https://cdn.instructables.com/FXY/5JQP/I4PHHPFY/FXY5JQPI4PHHPFY.SQUARE2.jpg https://cdn.instructables.com/FXY/5JQP/I4PHHPFY/FXY5JQPI4PHHPFY.SQUARE.jpg https://cdn.instructables.com/FXY/5JQP/I4PHHPFY/FXY5JQPI4PHHPFY.SMALL.jpg shevauto This is project of temperature sensor, value of temperature will be transmitted on Android smartphone via Bluetooth and displayed on its screen, with RemoteXY library used. Such a temperature sensor can be placed in an inaccessible location, such as behind the window, in the refrigerator. Electric...
By: shevauto

Continue Reading »]]>
Fri, 9 Jan 2015 08:00:09 PST
Solar Boat Kit :: KidWind Project http://www.instructables.com/id/Solar-Boat-Kit-KidWind-Project/
Solar Boat Kit :: KidWind Project - More DIY How To Projects]]> https://cdn.instructables.com/FS7/T2OB/FLROLXC1/FS7T2OBFLROLXC1.SQUARE2.jpg https://cdn.instructables.com/FS7/T2OB/FLROLXC1/FS7T2OBFLROLXC1.SQUARE.jpg https://cdn.instructables.com/FS7/T2OB/FLROLXC1/FS7T2OBFLROLXC1.SMALL.gif kidwindrob This tutorial by KidWind provides details for making a solar boat for a class or hobby project.Build the best boat you can and race your friends! Solar Power Basics This boat is powered by solar panels or solar cells, which harness light energy from the sun to produce electricity. When light from...
By: kidwindrob

Continue Reading »]]>
Fri, 10 Oct 2008 14:46:49 PDT
EASY MCPE Mansion http://www.instructables.com/id/EASY-MCPE-Mansion/
EASY MCPE Mansion - More DIY How To Projects]]> https://cdn.instructables.com/F6F/VFHZ/I8BGGF0L/F6FVFHZI8BGGF0L.SQUARE2.jpg https://cdn.instructables.com/F6F/VFHZ/I8BGGF0L/F6FVFHZI8BGGF0L.SQUARE.jpg https://cdn.instructables.com/F6F/VFHZ/I8BGGF0L/F6FVFHZI8BGGF0L.SMALL.jpg elisha7 Hi guys! Welcome to my instructable, how to build an EASY peasy mansion. Well,it's not really a mansion, it just looks like one. It takes about 15-25 minutes to make depending on how fast you build. So what are we waiting for? Lets get started! Make This Shape With Cobble Stone null Make It 3 B...
By: elisha7

Continue Reading »]]>
Fri, 10 Apr 2015 10:21:50 PDT
Soft Latching Power Switch ON / OFF Circuit http://www.instructables.com/id/Soft-Latching-Power-Switch-ON-OFF-Circuit/
Soft Latching Power Switch ON / OFF Circuit - More DIY How To Projects]]> https://cdn.instructables.com/FCY/FW9A/IB6C67PY/FCYFW9AIB6C67PY.SQUARE2.jpg https://cdn.instructables.com/FCY/FW9A/IB6C67PY/FCYFW9AIB6C67PY.SQUARE.jpg https://cdn.instructables.com/FCY/FW9A/IB6C67PY/FCYFW9AIB6C67PY.SMALL.jpg Kedar Nimbalkar Simplest Soft Latching Power Push Switch ON/OFF CircuitThis soft Latching Power Switch circuit design contain only two transistor, resistors and momentary push button switches,so this is one of the cheapest way to get your work doneYou can use any Transistor in this circuit, just it will need to fin...
By: Kedar Nimbalkar

Continue Reading »]]>
Sun, 21 Jun 2015 07:48:19 PDT
Halter bra http://www.instructables.com/id/Halter-bra/
Halter bra - More DIY How To Projects]]> https://cdn.instructables.com/FEG/A72P/F37OW72E/FEGA72PF37OW72E.SQUARE2.jpg https://cdn.instructables.com/FEG/A72P/F37OW72E/FEGA72PF37OW72E.SQUARE.jpg https://cdn.instructables.com/FEG/A72P/F37OW72E/FEGA72PF37OW72E.SMALL.jpg chuCraft Turn a so-so bra into a great halter bra! It's far more comfortable than using a convertible bra, too. This works best with a triangle bra (shown below) or a demi bra. Gather materials You will need: - a bra you don't particularly like as it is - scissors - sewing needle - thread The bra you...
By: chuCraft

Continue Reading »]]>
Wed, 20 Jun 2007 13:04:04 PDT
How to Carve a Wooden Knife http://www.instructables.com/id/How-to-Carve-a-Wooden-Knife/
How to Carve a Wooden Knife - More DIY How To Projects]]> https://cdn.instructables.com/FB6/7SP9/FOHXBL70/FB67SP9FOHXBL70.SQUARE2.jpg https://cdn.instructables.com/FB6/7SP9/FOHXBL70/FB67SP9FOHXBL70.SQUARE.jpg https://cdn.instructables.com/FB6/7SP9/FOHXBL70/FB67SP9FOHXBL70.SMALL.jpg Thelonelysandwitch In this instructable, I will be showing you how to carve a wooden knife out of door shims (the ones that are like 8-10 inch long). The knife will have a point but wont be able to cut anything more then thread, wood doesn't hold an edge very well. I am not responsible for anything dumb done with the ...
By: Thelonelysandwitch

Continue Reading »]]>
Wed, 17 Dec 2008 13:57:58 PST
Text to Speech batch program http://www.instructables.com/id/Text-to-Speech-batch-program/
Text to Speech batch program - More DIY How To Projects]]> https://cdn.instructables.com/FJO/D3WE/H9G17C56/FJOD3WEH9G17C56.SQUARE2.jpg https://cdn.instructables.com/FJO/D3WE/H9G17C56/FJOD3WEH9G17C56.SQUARE.jpg https://cdn.instructables.com/FJO/D3WE/H9G17C56/FJOD3WEH9G17C56.SMALL.jpg Prof. Pickle As I promised earlier, I have made this instructable. This is part of a set of instructables I am making that focuses around one of the original features in my Mega_Menu V 2.4 batch program. I have one other, previously made instructable on my address book program which you can find here.  This pro...
By: Prof. Pickle

Continue Reading »]]>
Sat, 17 Nov 2012 13:13:41 PST
Build a CNC Router from Scratch (Part 1): Complete Video Tutorial http://www.instructables.com/id/Build-a-CNC-Router-from-Scratch-Part-1%3a-Complete/
Build a CNC Router from Scratch (Part 1): Complete Video Tutorial - More DIY How To Projects]]> https://cdn.instructables.com/FBH/SD0U/F4WY1JJN/FBHSD0UF4WY1JJN.SQUARE2.jpg https://cdn.instructables.com/FBH/SD0U/F4WY1JJN/FBHSD0UF4WY1JJN.SQUARE.jpg https://cdn.instructables.com/FBH/SD0U/F4WY1JJN/FBHSD0UF4WY1JJN.SMALL.jpg phooddaniel Completely build a CNC router from the ground up without plans, just your hands, some cheap materials and basic tools, and common sense. Did I mention you don't need plans? It's easy, and I guide you through a process of building that the measurements are derived through a logical approach, so all...
By: phooddaniel

Continue Reading »]]>
Sat, 4 Aug 2007 14:47:41 PDT
How to make up a short story http://www.instructables.com/id/How-to-make-up-a-short-story/
How to make up a short story - More DIY How To Projects]]> https://cdn.instructables.com/FZ8/4FYS/GVKGJFD6/FZ84FYSGVKGJFD6.SQUARE2.jpg https://cdn.instructables.com/FZ8/4FYS/GVKGJFD6/FZ84FYSGVKGJFD6.SQUARE.jpg https://cdn.instructables.com/FZ8/4FYS/GVKGJFD6/FZ84FYSGVKGJFD6.SMALL.jpg Annsburo Hi guys ! Do you want to make something special ? Something different from a cooking recipe ? So you found the right instructable ! You don't have to buy anything, you just need a piece of paper and a pen or a computer to write. You also need some imagination and a bit of patience. Don't worry ! It'...
By: Annsburo

Continue Reading »]]>
Tue, 29 Nov 2011 01:47:37 PST
The Digital Doormat http://www.instructables.com/id/The-Digital-Doormat/
The Digital Doormat - More DIY How To Projects]]> https://cdn.instructables.com/FGQ/XOHZ/IVMQ3535/FGQXOHZIVMQ3535.SQUARE2.jpg https://cdn.instructables.com/FGQ/XOHZ/IVMQ3535/FGQXOHZIVMQ3535.SQUARE.jpg https://cdn.instructables.com/FGQ/XOHZ/IVMQ3535/FGQXOHZIVMQ3535.SMALL.jpg zposner The digital doormat is a doormat that sends you an email when it is stepped on. Have you ever been curious about who is coming and going from your house? This simple electronics project can provide valuable information regarding the whereabouts of your visitors. It can also be easily modified to per...
By: zposner

Continue Reading »]]>
Mon, 21 Nov 2016 20:31:51 PST
ARDUINO_ POLAR V PLOTTER http://www.instructables.com/id/ARDUINO-POLAR-V-PLOTTER/
ARDUINO_ POLAR V PLOTTER - More DIY How To Projects]]> https://cdn.instructables.com/FAA/SUDZ/IVO3XMK4/FAASUDZIVO3XMK4.SQUARE2.jpg https://cdn.instructables.com/FAA/SUDZ/IVO3XMK4/FAASUDZIVO3XMK4.SQUARE.jpg https://cdn.instructables.com/FAA/SUDZ/IVO3XMK4/FAASUDZIVO3XMK4.SMALL.jpg InevitableCraftsLab This Instructable will be about Polar Plotters.There are a lot of different versions to build one, and i just wanna share how i built it.The Software i use is called Makelangelo, and can be downloaded here:http://www.makelangelo.comIf you have further questions or ideas to perfect my design, please ...
By: InevitableCraftsLab

Continue Reading »]]>
Thu, 24 Nov 2016 04:14:54 PST
The Zipper Alarm http://www.instructables.com/id/The-Zipper-Alarm/
The Zipper Alarm - More DIY How To Projects]]> https://cdn.instructables.com/FN6/SSEA/IVHQKXSE/FN6SSEAIVHQKXSE.SQUARE2.jpg https://cdn.instructables.com/FN6/SSEA/IVHQKXSE/FN6SSEAIVHQKXSE.SQUARE.jpg https://cdn.instructables.com/FN6/SSEA/IVHQKXSE/FN6SSEAIVHQKXSE.SMALL.jpg Henk Rijckaert We all know the problem. Your fly is open. Your zipper is undone. Always a winner at social occasions. Oh, isn't it a hoot when one of your friends says: "Paging Mr. Johnson... Paging Mr. Johnson..." our "You've got a security breach at Los Pantaloons" I fixed this problem once and for all with the ...
By: Henk Rijckaert

Continue Reading »]]>
Tue, 15 Nov 2016 02:00:30 PST
control arduino using joystick http://www.instructables.com/id/control-arduino-using-joystick/
control arduino using joystick - More DIY How To Projects]]> https://cdn.instructables.com/FPP/6ZOP/FRTXG8VF/FPP6ZOPFRTXG8VF.SQUARE2.jpg https://cdn.instructables.com/FPP/6ZOP/FRTXG8VF/FPP6ZOPFRTXG8VF.SQUARE.jpg https://cdn.instructables.com/FPP/6ZOP/FRTXG8VF/FPP6ZOPFRTXG8VF.SMALL.jpg bigbodysmallbrain after about a month of have my arduino I got bored so I was surfing the web and found this cool way of controlling arduino if you do any thing illegal i am not held responsable things needed 1.arduino (duh) 2. computer (if u are reading this you have one unless it is not yours _) 3.usb ports(...
By: bigbodysmallbrain

Continue Reading »]]>
Wed, 18 Mar 2009 17:40:28 PDT
Wallet Sewing Pattern and Tutorial http://www.instructables.com/id/Wallet-Sewing-Pattern-and-Tutorial/
Wallet Sewing Pattern and Tutorial - More DIY How To Projects]]> https://cdn.instructables.com/FD0/LPXV/IH3R38LO/FD0LPXVIH3R38LO.SQUARE2.jpg https://cdn.instructables.com/FD0/LPXV/IH3R38LO/FD0LPXVIH3R38LO.SQUARE.jpg https://cdn.instructables.com/FD0/LPXV/IH3R38LO/FD0LPXVIH3R38LO.SMALL.jpg RebekahP This tutorial is featured on my site supersimplesewing.com I love giving this wallet as a gift for someone paired with their favorite gift card. I can always find a scrap big enough to make another one. It is appropriate for quilting fabric, fat quarters, light weight home dec fabrics as well at m...
By: RebekahP

Continue Reading »]]>
Tue, 17 Nov 2015 12:18:45 PST
Black Hole Table http://www.instructables.com/id/Black-Hole-Table/
Black Hole Table - More DIY How To Projects]]> https://cdn.instructables.com/FCT/R7EH/IVO819V3/FCTR7EHIVO819V3.SQUARE2.jpg https://cdn.instructables.com/FCT/R7EH/IVO819V3/FCTR7EHIVO819V3.SQUARE.jpg https://cdn.instructables.com/FCT/R7EH/IVO819V3/FCTR7EHIVO819V3.SMALL.jpg makendo This table evokes the warping effect on space and time exerted by a black hole. The table consists of black acrylic rings intersecting with a radial array of ribs that plunge downwards into a central hole, and an infinity mirror at the bottom gives the impression of an event horizon as the warping d...
By: makendo

Continue Reading »]]>
Tue, 29 Nov 2016 20:48:39 PST
Impossible Dovetail Joint Puzzle http://www.instructables.com/id/Impossible-Dovetail-Joint-Puzzle-The-Easy-Way/
Impossible Dovetail Joint Puzzle - More DIY How To Projects]]> https://cdn.instructables.com/FBB/5NA0/IVO85EUN/FBB5NA0IVO85EUN.SQUARE2.jpg https://cdn.instructables.com/FBB/5NA0/IVO85EUN/FBB5NA0IVO85EUN.SQUARE.jpg https://cdn.instructables.com/FBB/5NA0/IVO85EUN/FBB5NA0IVO85EUN.SMALL.jpg fs woodworking A few years ago I saw a puzzle like this somewhere on the internet and I was really amazed. The only problem I had was my woodworking skills. Now I think I am ready to make one myself, although the handcrafted version of it is quite difficult. So why not make one using power tools for ease and preci...
By: fs woodworking

Continue Reading »]]>
Wed, 30 Nov 2016 11:58:31 PST
Hardwood Rug http://www.instructables.com/id/Hardwood-Rug/
Hardwood Rug - More DIY How To Projects]]> https://cdn.instructables.com/FP7/LIRQ/IVO4OV3H/FP7LIRQIVO4OV3H.SQUARE2.jpg https://cdn.instructables.com/FP7/LIRQ/IVO4OV3H/FP7LIRQIVO4OV3H.SQUARE.jpg https://cdn.instructables.com/FP7/LIRQ/IVO4OV3H/FP7LIRQIVO4OV3H.SMALL.jpg ClenseYourPallet Instructables inspires me to make stuff. That is one of my very favorite parts of this site. I would have never thought to make wood sandals or a ring made out of a penny and wood. I click through the the different instructables and contest and by the end I am inspired to make something cool. It hap...
By: ClenseYourPallet

Continue Reading »]]>
Mon, 28 Nov 2016 16:19:16 PST
Secret Compartment Floating Shelf http://www.instructables.com/id/Secret-Compartment-Floating-Shelf/
Secret Compartment Floating Shelf - More DIY How To Projects]]> https://cdn.instructables.com/FXK/35S8/IVO84K6H/FXK35S8IVO84K6H.SQUARE2.jpg https://cdn.instructables.com/FXK/35S8/IVO84K6H/FXK35S8IVO84K6H.SQUARE.jpg https://cdn.instructables.com/FXK/35S8/IVO84K6H/FXK35S8IVO84K6H.SMALL.jpg Adam Gabbert A friend needed a floating shelf that had a secret compartment for some of their important items. We decided to use reclaimed wood for the finish. And this is how I made it! Check out the build video. Here's the build video so you can see the hidden compartment shelf in action. You can also see ...
By: Adam Gabbert

Continue Reading »]]>
Wed, 30 Nov 2016 08:17:17 PST
Usb Wall Outlet Hack http://www.instructables.com/id/Usb-Wall-Outlet-Hack/
Usb Wall Outlet Hack - More DIY How To Projects]]> https://cdn.instructables.com/F1F/QWNA/ILE0KR4P/F1FQWNAILE0KR4P.SQUARE2.jpg https://cdn.instructables.com/F1F/QWNA/ILE0KR4P/F1FQWNAILE0KR4P.SQUARE.jpg https://cdn.instructables.com/F1F/QWNA/ILE0KR4P/F1FQWNAILE0KR4P.SMALL.jpg diyfuntech Phone,Phone,Phone!Everyone Uses It All the Time,Maybe You Are Using It Right Now As Well!But Every phone has One Disadvantage!That It Runs Out Of juice really Fast!These Days Finding Phone Chargers make Our Heads Spin!So I Decided To Hack My Ac Wall Outlet Into A Built In Phone Charger!Now No one Ca...
By: diyfuntech

Continue Reading »]]>
Fri, 4 Mar 2016 13:28:53 PST
Precision Puzzlemaking Primer -- Volume 1 http://www.instructables.com/id/Precision-Puzzlemaking-Primer----Volume-1/
Precision Puzzlemaking Primer -- Volume 1 - More DIY How To Projects]]> https://cdn.instructables.com/F5T/QTWL/F37OW7K7/F5TQTWLF37OW7K7.SQUARE2.jpg https://cdn.instructables.com/F5T/QTWL/F37OW7K7/F5TQTWLF37OW7K7.SQUARE.jpg https://cdn.instructables.com/F5T/QTWL/F37OW7K7/F5TQTWLF37OW7K7.SMALL.jpg lkrasnow By Lee KrasnowThis instructable will guide you through all of the steps necessary to turn an ordinary table saw into a precision puzzlemaking machine. Join me in this in-depth primer as I cover all of the key aspects of designing and building your own puzzlemaker's crosscutting sled like the one sho...
By: lkrasnow

Continue Reading »]]>
Wed, 27 Jun 2007 10:51:20 PDT
TPA3118 Amplifier and Speaker http://www.instructables.com/id/TPA3118-Amplifier-and-Speaker/
TPA3118 Amplifier and Speaker - More DIY How To Projects]]> https://cdn.instructables.com/FAB/EQEM/IVO4GDQ9/FABEQEMIVO4GDQ9.SQUARE2.jpg https://cdn.instructables.com/FAB/EQEM/IVO4GDQ9/FABEQEMIVO4GDQ9.SQUARE.jpg https://cdn.instructables.com/FAB/EQEM/IVO4GDQ9/FABEQEMIVO4GDQ9.SMALL.jpg FunkyPineapple Hi everyone!After using a TPA3118 amplifier module for a while, I thought it would be fun to design my own PCB with the popular TPA311x series of amplifier chips as my first major electronics project. But why stop there? I ended up throwing on a Bluetooth module, a crossover, a bass booster and desi...
By: FunkyPineapple

Continue Reading »]]>
Sun, 27 Nov 2016 22:13:30 PST
Simple Batchfile Login System with Loading Bar http://www.instructables.com/id/Simple-Batchfile-Login-System-with-Loading-Bar/
Simple Batchfile Login System with Loading Bar - More DIY How To Projects]]> https://cdn.instructables.com/FTA/4TDD/HJW8WA0S/FTA4TDDHJW8WA0S.SQUARE2.jpg https://cdn.instructables.com/FTA/4TDD/HJW8WA0S/FTA4TDDHJW8WA0S.SQUARE.jpg https://cdn.instructables.com/FTA/4TDD/HJW8WA0S/FTA4TDDHJW8WA0S.SMALL.jpg errorcode401 Here we are sharing Batch file for login system with loading bar. We will show you code and also show you how to use. You can also visit our blog for more batch file codes. FFLocker 1.0 : http://errorcode401.blogspot.in/2013/06/FFlocker-1.0.html RarFile Password Cracker : http://errorcode401.blogspo...
By: errorcode401

Continue Reading »]]>
Sat, 3 Aug 2013 07:17:20 PDT
a last minute (sort of cheap) Assassin's creed party costume http://www.instructables.com/id/relatively-cheap-assassins-creed-cosplay/
a last minute (sort of cheap) Assassin's creed party costume - More DIY How To Projects]]> https://cdn.instructables.com/FZW/GFLU/HHS9KOW4/FZWGFLUHHS9KOW4.SQUARE2.jpg https://cdn.instructables.com/FZW/GFLU/HHS9KOW4/FZWGFLUHHS9KOW4.SQUARE.jpg https://cdn.instructables.com/FZW/GFLU/HHS9KOW4/FZWGFLUHHS9KOW4.SMALL.jpg Bwilson Props here i will show you how to make an Ezio Auditore cosplay from Assassin's Creed: Brotherhood. it seemed my pulse rifle was liked so i hope you appreciate my efforts to bring you another instructable. finding the parts. you need for this: an Ezio Auditore costume from Escapade http://www.escapade...
By: Bwilson Props

Continue Reading »]]>
Wed, 12 Jun 2013 12:43:03 PDT
Mechanical Pocket Watch for 3D Print http://www.instructables.com/id/Mechanical-Pocket-Watch-for-3D-Print/
Mechanical Pocket Watch for 3D Print - More DIY How To Projects]]> https://cdn.instructables.com/FI7/OR5Y/HINNZA9M/FI7OR5YHINNZA9M.SQUARE2.jpg https://cdn.instructables.com/FI7/OR5Y/HINNZA9M/FI7OR5YHINNZA9M.SQUARE.jpg https://cdn.instructables.com/FI7/OR5Y/HINNZA9M/FI7OR5YHINNZA9M.SMALL.jpg MattRickS A quick note to say that these are only preliminary images! I will be uploading a video of the watch in action, as well as better renders and more descriptions next week but unfortunately I'm out of time this week. Watch this space to see how it all works! In this instructable I'm going to show yo...
By: MattRickS

Continue Reading »]]>
Thu, 4 Jul 2013 08:12:32 PDT