Instructables: exploring - BC78627429331029BC6B001143E7E506 - mod http://www.instructables.com Sun, 1 Mar 2015 07:49:52 PST BLOX v1.01 Volt Stick LED Mod http://www.instructables.com/id/Volt-Stick-LED-Mod/
Volt Stick LED Mod - More DIY How To Projects]]> http://cdn.instructables.com/FZB/IAKL/I6NIB3A8/FZBIAKLI6NIB3A8.SQUARE2.jpg http://cdn.instructables.com/FZB/IAKL/I6NIB3A8/FZBIAKLI6NIB3A8.SQUARE.jpg http://cdn.instructables.com/FZB/IAKL/I6NIB3A8/FZBIAKLI6NIB3A8.SMALL.jpg kosborne2 The Fluke volt stick 1AC-E II has a been a part of my every day carry for the last few years. Its reliable, easy to replace batteries and if need be the device is available at many shops. Its also easy to carry and has only simple modes; ON, OFF or SILENT.I did however look into their other models, ...
By: kosborne2

Continue Reading »]]>
Sun, 1 Mar 2015 04:37:55 PST
Use a combo amp as a cabinet (cheap and easy) http://www.instructables.com/id/Use-a-combo-amp-as-a-cabinet-cheap-and-easy/
Use a combo amp as a cabinet (cheap and easy) - More DIY How To Projects]]> http://cdn.instructables.com/F5I/ST6P/I6HSGB6K/F5IST6PI6HSGB6K.SQUARE2.jpg http://cdn.instructables.com/F5I/ST6P/I6HSGB6K/F5IST6PI6HSGB6K.SQUARE.jpg http://cdn.instructables.com/F5I/ST6P/I6HSGB6K/F5IST6PI6HSGB6K.SMALL.jpg legitbush This is the simplest way to use a combo amp as a speaker cabinet for a separate amp head. I am using a Line 6 Spider IV combo here but most combos will work this way. The required parts only cost £8.50 ($13) and this project can be undertaken by someone with little to no electrical skills like mysel...
By: legitbush

Continue Reading »]]>
Tue, 24 Feb 2015 10:34:59 PST
Otterbox Commuter Series fix for IPhone 6 http://www.instructables.com/id/Otterbox-Commuter-Series-fix-for-IPhone-6/
Otterbox Commuter Series fix for IPhone 6 - More DIY How To Projects]]> http://cdn.instructables.com/FWO/NVYH/I6HSDZJY/FWONVYHI6HSDZJY.SQUARE2.jpg http://cdn.instructables.com/FWO/NVYH/I6HSDZJY/FWONVYHI6HSDZJY.SQUARE.jpg http://cdn.instructables.com/FWO/NVYH/I6HSDZJY/FWONVYHI6HSDZJY.SMALL.jpg skuishingbugs I am a long time apple fan, and loved my iPhone 4s, which I put an Otterbox Commuter Series on as well. I loved the case on the phone so much that when I upgraded to the iPhone 6, I got the same case. But the Otterbox for the iPhone 6 was very poorly designed, and does not fit right, which is why I...
By: skuishingbugs

Continue Reading »]]>
Mon, 23 Feb 2015 20:21:15 PST
Nerf Mod: Destiny Vanguard Custom Shotgun "Snaggletooth" http://www.instructables.com/id/Nerf-Mod-Destiny-Vanguard-Custom-Shotgun-Snaggleto/
Nerf Mod: Destiny Vanguard Custom Shotgun "Snaggletooth" - More DIY How To Projects]]> http://cdn.instructables.com/F2Q/EU1Q/I6NI2GJM/F2QEU1QI6NI2GJM.SQUARE2.jpg http://cdn.instructables.com/F2Q/EU1Q/I6NI2GJM/F2QEU1QI6NI2GJM.SQUARE.jpg http://cdn.instructables.com/F2Q/EU1Q/I6NI2GJM/F2QEU1QI6NI2GJM.SMALL.jpg Bwilson Props Heya all. Bella here (i'll explain it all) bringing you my first custom prop, this is also my first nerf mod. Now the "Snaggletooth" isn't actually a shotgun in Destiny, it's because I designed the Snaggletooth. it's modelled off of a Nerf Roughcut 2X4, but i'm giving it a custom BHartigan Props mak...
By: Bwilson Props

Continue Reading »]]>
Fri, 20 Feb 2015 10:27:52 PST
Automated Chicken Farm http://www.instructables.com/id/Automated-Chicken-Farm/
Automated Chicken Farm - More DIY How To Projects]]> http://cdn.instructables.com/FM2/BAKT/I6EXHTC0/FM2BAKTI6EXHTC0.SQUARE2.jpg http://cdn.instructables.com/FM2/BAKT/I6EXHTC0/FM2BAKTI6EXHTC0.SQUARE.jpg http://cdn.instructables.com/FM2/BAKT/I6EXHTC0/FM2BAKTI6EXHTC0.SMALL.jpg Arthak In this Instructable We will be showing you how to make an fully automated chicken farm with good capacity and speed. Making The Farm Click to see VideoIf you like please subscribe here and also on youtube channel.Twitter: "www.twitter.com/flameyingo"Suggestions are always welcomed
By: Arthak

Continue Reading »]]>
Fri, 20 Feb 2015 09:09:51 PST
Nether Portal in Minecraft http://www.instructables.com/id/Nether-Portal-in-Minecraft/
Nether Portal in Minecraft - More DIY How To Projects]]> http://cdn.instructables.com/F7Z/83OF/I6DZ08LV/F7Z83OFI6DZ08LV.SQUARE2.jpg http://cdn.instructables.com/F7Z/83OF/I6DZ08LV/F7Z83OFI6DZ08LV.SQUARE.jpg http://cdn.instructables.com/F7Z/83OF/I6DZ08LV/F7Z83OFI6DZ08LV.SMALL.jpg Arthak In this Instructable we will be showing you how to make nether portal and a little about nether Making the Nether Portal Click to see the VideoIf you like please subscribe here and also on youtube channel.Twitter: "www.twitter.com/flameyingo"Suggestions are always welcomed
By: Arthak

Continue Reading »]]>
Fri, 20 Feb 2015 09:09:51 PST
G4 Server Workstation Mod http://www.instructables.com/id/G4-CASE-MOD/
G4 Server Workstation Mod - More DIY How To Projects]]> http://cdn.instructables.com/FDD/LIEY/I697PRTJ/FDDLIEYI697PRTJ.SQUARE2.jpg http://cdn.instructables.com/FDD/LIEY/I697PRTJ/FDDLIEYI697PRTJ.SQUARE.jpg http://cdn.instructables.com/FDD/LIEY/I697PRTJ/FDDLIEYI697PRTJ.SMALL.jpg Tbsrokks05 This is my first inscrutable where I'm going to show you how to take an old Mac G4 and install a server motherboard in it with two Intel Xeon cpu's installed.Parts list---550 watt 24/8 pin server psu-server ps2 5300 ecc fully buffered 667 MHz 2 * 2 gbs ram (bought 4 more 2gb sticks of ram for the bu...
By: Tbsrokks05

Continue Reading »]]>
Sun, 15 Feb 2015 17:51:51 PST
How to Plasti Dip Jeep Wrangler Wheels (without removing the wheels) http://www.instructables.com/id/How-to-Plasti-Dip-Jeep-Wrangler-Wheels-without-rem/
How to Plasti Dip Jeep Wrangler Wheels (without removing the wheels) - More DIY How To Projects]]> http://cdn.instructables.com/FI9/I2JM/I63EZKF4/FI9I2JMI63EZKF4.SQUARE2.jpg http://cdn.instructables.com/FI9/I2JM/I63EZKF4/FI9I2JMI63EZKF4.SQUARE.jpg http://cdn.instructables.com/FI9/I2JM/I63EZKF4/FI9I2JMI63EZKF4.SMALL.jpg howtowrangler You can use Plasti Dip as a cheap and easy way to upgrade the look of your Jeep Wrangler's stock rims. Plastic-dip gives you a durable, lasting coat that looks professional, neat and clean. for a video of this intractable click this link Plasti-dip Jeep Wrangler Wheels You will need Click here fo...
By: howtowrangler

Continue Reading »]]>
Fri, 13 Feb 2015 21:42:56 PST
Game Theory: Nintendo in a Book http://www.instructables.com/id/Game-Theory-Nintendo-in-a-Book/
Game Theory: Nintendo in a Book - More DIY How To Projects]]> http://cdn.instructables.com/FOD/XQUV/I5Z7LBLT/FODXQUVI5Z7LBLT.SQUARE2.jpg http://cdn.instructables.com/FOD/XQUV/I5Z7LBLT/FODXQUVI5Z7LBLT.SQUARE.jpg http://cdn.instructables.com/FOD/XQUV/I5Z7LBLT/FODXQUVI5Z7LBLT.SMALL.jpg ezeisel I like retro gaming. With an original Nintendo you just can't go wrong. Okay, you can, but it's still pretty fun.You know what isn't fun? Cords and gaming systems taking up space.How do you solve a problem? Turn it into something much more manageable. And so I turned a 2nd Gen NES into a book...well...
By: ezeisel

Continue Reading »]]>
Tue, 10 Feb 2015 10:30:34 PST
How To Add A Nuclear Option To Risk ( Board Game Mod ) http://www.instructables.com/id/How-To-Add-A-Nuclear-Option-To-Risk-Board-Game-Mod/
How To Add A Nuclear Option To Risk ( Board Game Mod ) - More DIY How To Projects]]> http://cdn.instructables.com/FCA/1WYW/I6002C67/FCA1WYWI6002C67.SQUARE2.jpg http://cdn.instructables.com/FCA/1WYW/I6002C67/FCA1WYWI6002C67.SQUARE.jpg http://cdn.instructables.com/FCA/1WYW/I6002C67/FCA1WYWI6002C67.SMALL.jpg BizOfTech Risk is a classic board game that often has house rules. Some of these mods are even official mods, like Starcraft, Lord of the Rings, Halo, Doctor Who, Walking Dead, and 2210. Because Risk is originally about the post World War II cold war, I have always thought it needed a Nuclear component. To...
By: BizOfTech

Continue Reading »]]>
Mon, 9 Feb 2015 10:26:29 PST
Nerf Front Gun compartment mod http://www.instructables.com/id/Nerf-Front-Gun-compartment-mod/
Nerf Front Gun compartment mod - More DIY How To Projects]]> http://cdn.instructables.com/FDB/N9JB/I60027Z5/FDBN9JBI60027Z5.SQUARE2.jpg http://cdn.instructables.com/FDB/N9JB/I60027Z5/FDBN9JBI60027Z5.SQUARE.jpg http://cdn.instructables.com/FDB/N9JB/I60027Z5/FDBN9JBI60027Z5.SMALL.jpg stubnosec36 This tutorial will show you how to make a 5 dart compartment and sliding door for the dual blaster. Cut off top back of gun pic 1: this is the look and amount that I'm cutting off from the top back half of the gun.pic 2: top is gone and I'm going to grind those other pieces inside, without affect...
By: stubnosec36

Continue Reading »]]>
Sun, 8 Feb 2015 09:37:51 PST
Longshot custom paint mod http://www.instructables.com/id/Longshot-custom-paint-mod/
Longshot custom paint mod - More DIY How To Projects]]> http://cdn.instructables.com/F1C/DJLG/I6001AZS/F1CDJLGI6001AZS.SQUARE2.jpg http://cdn.instructables.com/F1C/DJLG/I6001AZS/F1CDJLGI6001AZS.SQUARE.jpg http://cdn.instructables.com/F1C/DJLG/I6001AZS/F1CDJLGI6001AZS.SMALL.jpg stubnosec36 THIS TUTORIAL SHOWS CUSTOM PAINT FOR GIRL'S LONGSHOTmore pictures at the end of the short tutorial.Also, taping up stuff and coming up with ideas is the hardest part. Thought you should know, still worth it though. Cover areas not painted First thing is to lightly sand everything, does not have ...
By: stubnosec36

Continue Reading »]]>
Thu, 5 Feb 2015 07:54:12 PST
Roomba virtual wall mod, for in-wall AC power (no more batteries!) http://www.instructables.com/id/Roomba-virtual-wall-mod-for-in-wall-AC-power-no-mo/
Roomba virtual wall mod, for in-wall AC power (no more batteries!) - More DIY How To Projects]]> http://cdn.instructables.com/FP6/NTKL/I5MD5OKP/FP6NTKLI5MD5OKP.SQUARE2.jpg http://cdn.instructables.com/FP6/NTKL/I5MD5OKP/FP6NTKLI5MD5OKP.SQUARE.jpg http://cdn.instructables.com/FP6/NTKL/I5MD5OKP/FP6NTKLI5MD5OKP.SMALL.jpg _rchow As a person who is a self-confessed techie, I have an onslaughtof electronic devices in my home. A fair share of these devices requirebatteries, and over time it can be quite expensive to replace. Also, it isinconvenient for those times when the batteries die at the most inopportunetime. While batte...
By: _rchow

Continue Reading »]]>
Mon, 2 Feb 2015 18:38:11 PST
Groundhog Day Alarm Clock http://www.instructables.com/id/Groundhog-Day-Alarm-Clock/
Groundhog Day Alarm Clock - More DIY How To Projects]]> http://cdn.instructables.com/FZ5/3G57/I5MD02NS/FZ53G57I5MD02NS.SQUARE2.jpg http://cdn.instructables.com/FZ5/3G57/I5MD02NS/FZ53G57I5MD02NS.SQUARE.jpg http://cdn.instructables.com/FZ5/3G57/I5MD02NS/FZ53G57I5MD02NS.SMALL.jpg randofo The Groundhog Day Alarm Clock consists of a Panasonic RC-6025 flip clock modified to play the audio from the movie Groundhog Day when the alarm goes off.The reason I have created this device is because Groundhog Day (both the day and film) holds a special place in my heart. I first met my life-partn...
By: randofo

Continue Reading »]]>
Sun, 1 Feb 2015 08:30:20 PST
nerf longshot scope custom paint mod http://www.instructables.com/id/nerf-longshot-scope-custom-paint-mod/
nerf longshot scope custom paint mod - More DIY How To Projects]]> http://cdn.instructables.com/FMT/R5B2/I5NS3RWD/FMTR5B2I5NS3RWD.SQUARE2.jpg http://cdn.instructables.com/FMT/R5B2/I5NS3RWD/FMTR5B2I5NS3RWD.SQUARE.jpg http://cdn.instructables.com/FMT/R5B2/I5NS3RWD/FMTR5B2I5NS3RWD.SMALL.jpg stubnosec36 This tutorial will explain basic painting tips for detailing your scope by just spraying.This should help those who are not skilled in artistry painting or steady handedness.For the gun go to the nerf gun custom paint mod. Lets spray the primer N base coat You will need: paint suitable for plast...
By: stubnosec36

Continue Reading »]]>
Sat, 31 Jan 2015 15:00:47 PST
My Competitor 4 Mods http://www.instructables.com/id/My-Competitor-4-Mods/
My Competitor 4 Mods - More DIY How To Projects]]> http://cdn.instructables.com/FML/EALA/I5JHT7SG/FMLEALAI5JHT7SG.SQUARE2.jpg http://cdn.instructables.com/FML/EALA/I5JHT7SG/FMLEALAI5JHT7SG.SQUARE.jpg http://cdn.instructables.com/FML/EALA/I5JHT7SG/FMLEALAI5JHT7SG.SMALL.jpg Ricardo Awesome The Competitor IV by JonnyBGood is a great knex pistol, so go build it right now. I'll wait....seriously. Do it.Go. Now.......Oh, hey. Welcome back.I thought you forgot about me.Well, anyways, these are my mods to his gun. Enjoy. Base Mods Snub nose, larger caliber ammo, grip extension, and flip ...
By: Ricardo Awesome

Continue Reading »]]>
Thu, 29 Jan 2015 11:41:03 PST
G5 Mac Power Supply to ATX Mod http://www.instructables.com/id/G5-Mac-Power-Supply-to-ATX-Mod/
G5 Mac Power Supply to ATX Mod - More DIY How To Projects]]> http://cdn.instructables.com/FWS/P4KV/I5F7OPGT/FWSP4KVI5F7OPGT.SQUARE2.jpg http://cdn.instructables.com/FWS/P4KV/I5F7OPGT/FWSP4KVI5F7OPGT.SQUARE.jpg http://cdn.instructables.com/FWS/P4KV/I5F7OPGT/FWSP4KVI5F7OPGT.SMALL.jpg gsotocomulada Converting a Mac Power Supply to ATX motherboard its no so hard to do. On the Picture above there is a ATX power supply on the left and a Mac on the right. The connectors on the power supply are different for the 2 computers but the cables are color coded equally. Here is the diagram for the 2...
By: gsotocomulada

Continue Reading »]]>
Tue, 27 Jan 2015 19:34:33 PST
Longshot scope making tips http://www.instructables.com/id/Longshot-scope-making-tips/
Longshot scope making tips - More DIY How To Projects]]> http://cdn.instructables.com/FHW/3TND/I5DS4PH9/FHW3TNDI5DS4PH9.SQUARE2.jpg http://cdn.instructables.com/FHW/3TND/I5DS4PH9/FHW3TNDI5DS4PH9.SQUARE.jpg http://cdn.instructables.com/FHW/3TND/I5DS4PH9/FHW3TNDI5DS4PH9.SMALL.jpg stubnosec36 This short tutorial will provide another option for placement of the glass B/F.This is how short it can get.This is a welding alternative to fullauto223's tutorial, which gave me the confidence to cut up my son's scope.I apologize for not having actual cut pieces pictures, I somehow lost the three p...
By: stubnosec36

Continue Reading »]]>
Mon, 26 Jan 2015 18:03:55 PST
nerf longshot custom paint mod 2 http://www.instructables.com/id/nerf-longshot-custom-paint-mod-2/
nerf longshot custom paint mod 2 - More DIY How To Projects]]> http://cdn.instructables.com/FJG/CLF5/I5DSWE1Q/FJGCLF5I5DSWE1Q.SQUARE2.jpg http://cdn.instructables.com/FJG/CLF5/I5DSWE1Q/FJGCLF5I5DSWE1Q.SQUARE.jpg http://cdn.instructables.com/FJG/CLF5/I5DSWE1Q/FJGCLF5I5DSWE1Q.SMALL.jpg stubnosec36 Nerf longshot stub nose c36. My son asked for a professional look for his gun. Well, here it is, and I hope he likes it. Get the base coat You should know if you want high gloss, low gloss or matte.Tape up what you don't want painted even during base coat.Note: make sure you have sanded and wip...
By: stubnosec36

Continue Reading »]]>
Mon, 26 Jan 2015 16:32:57 PST
Low Carry Attachment for Mora Knives (On a Budget) http://www.instructables.com/id/Low-Carry-Attachment-for-Mora-Knives-On-a-Budget/
Low Carry Attachment for Mora Knives (On a Budget) - More DIY How To Projects]]> http://cdn.instructables.com/F7Z/PDWK/I5BJ9E9S/F7ZPDWKI5BJ9E9S.SQUARE2.jpg http://cdn.instructables.com/F7Z/PDWK/I5BJ9E9S/F7ZPDWKI5BJ9E9S.SQUARE.jpg http://cdn.instructables.com/F7Z/PDWK/I5BJ9E9S/F7ZPDWKI5BJ9E9S.SMALL.jpg Common Man Survival In many parts of the world, come winter, everyone gets bundled up to stay warm and toasty when outdoors. The problem with that is that under all those layers, your belt carried knife may be difficult or impossible to extract when practicing winter Bushcraft or survival.Here is a quick guide to a ve...
By: Common Man Survival

Continue Reading »]]>
Sat, 24 Jan 2015 14:00:12 PST
Homemade Atomizer+Mod E-cigarette on the cheap http://www.instructables.com/id/Homemade-AtomizerMod-E-cigarette-on-the-cheap/
Homemade Atomizer+Mod E-cigarette on the cheap - More DIY How To Projects]]> http://cdn.instructables.com/FDN/NNHR/I58IBAQS/FDNNNHRI58IBAQS.SQUARE2.jpg http://cdn.instructables.com/FDN/NNHR/I58IBAQS/FDNNNHRI58IBAQS.SQUARE.jpg http://cdn.instructables.com/FDN/NNHR/I58IBAQS/FDNNNHRI58IBAQS.SMALL.jpg kwe Hi here is a short video to show you how i fully made my E-cigarettethe atomizer is made of an old lens the tank that fits in the lens is a coming from a juice bottleDrill holes in the bottom of the tankpeal of the insulation of the electrical connectorsI made a M3 thread in the connectors Cut the h...
By: kwe

Continue Reading »]]>
Thu, 22 Jan 2015 13:49:42 PST
0.5mm Precision Solder Pencil... or Got Lead? http://www.instructables.com/id/05mm-Precision-Solder-Dispenser-or-Solder-Doodling/
0.5mm Precision Solder Pencil... or Got Lead? - More DIY How To Projects]]> http://cdn.instructables.com/F5Y/GY3E/I55MXDZ3/F5YGY3EI55MXDZ3.SQUARE2.jpg http://cdn.instructables.com/F5Y/GY3E/I55MXDZ3/F5YGY3EI55MXDZ3.SQUARE.jpg http://cdn.instructables.com/F5Y/GY3E/I55MXDZ3/F5YGY3EI55MXDZ3.SMALL.jpg MoTinkerGNome Good afternoon all Makers, Tinkers, and Hackers. This is going to be a quick little tip to help you out with thin gauge solder. I like thin solder as it is easier to work with, but alas I have been given large hands. So I was thinking up a solution to keep solder close to my work piece, with a ...
By: MoTinkerGNome

Continue Reading »]]>
Wed, 21 Jan 2015 15:48:55 PST
Ferret-proof a litter pan with ULPM! http://www.instructables.com/id/Ferret-proof-a-litter-pan-with-ULPM/
Ferret-proof a litter pan with ULPM! - More DIY How To Projects]]> http://cdn.instructables.com/FR3/VKTI/I50XOM6A/FR3VKTII50XOM6A.SQUARE2.jpg http://cdn.instructables.com/FR3/VKTI/I50XOM6A/FR3VKTII50XOM6A.SQUARE.jpg http://cdn.instructables.com/FR3/VKTI/I50XOM6A/FR3VKTII50XOM6A.SMALL.jpg CHaynes2013 How would you like your ferret's litterpan to always look like this? I mean, we can't stop them from digesting food, but no more worrying about: Accidents outside the pan Accumulation of litter surrounding the pan Difficulty cleaning or regularly scooping Ferrets moving the pan and making a messIf y...
By: CHaynes2013

Continue Reading »]]>
Tue, 20 Jan 2015 05:37:13 PST
Enhance your SView/Flip cover with a cheap mod! http://www.instructables.com/id/Enhance-your-SViewFlip-cover-with-a-cheap-mod/
Enhance your SView/Flip cover with a cheap mod! - More DIY How To Projects]]> http://cdn.instructables.com/FJ4/EJEQ/I50X8WQB/FJ4EJEQI50X8WQB.SQUARE2.jpg http://cdn.instructables.com/FJ4/EJEQ/I50X8WQB/FJ4EJEQI50X8WQB.SQUARE.jpg http://cdn.instructables.com/FJ4/EJEQ/I50X8WQB/FJ4EJEQI50X8WQB.SMALL.jpg Foxhead In this instructable, I'll show you how to use your flip cover as a paper holder out of a portfolio. Gather the parts All you'll need is: •a cheap portfolio [I bought mine for €1.50] with the metal holder•some doublesided tape [optional, but you'll get a very strong grip at the end] •and (obvious...
By: Foxhead

Continue Reading »]]>
Sun, 18 Jan 2015 15:59:46 PST
Longshot mod http://www.instructables.com/id/This-mod-will-shorten-the-nose-and-reduce-restrict/
Longshot mod - More DIY How To Projects]]> http://cdn.instructables.com/FHP/CEAW/I4VQI8BG/FHPCEAWI4VQI8BG.SQUARE2.jpg http://cdn.instructables.com/FHP/CEAW/I4VQI8BG/FHPCEAWI4VQI8BG.SQUARE.jpg http://cdn.instructables.com/FHP/CEAW/I4VQI8BG/FHPCEAWI4VQI8BG.SMALL.jpg stubnosec36 This mod will shorten the nose and reduce restriction travel (Long barrel)I shortened the longshot cs-6 by almost 5 inches and it lost a lot of weight in the process.It is repainted grey /purple, black rivets to retrofit girl's standard for a change, in lieu of the Rebelle series, but that's in the ...
By: stubnosec36

Continue Reading »]]>
Thu, 15 Jan 2015 08:51:47 PST
Atary Lynx II - LED Backlight Install http://www.instructables.com/id/Atary-Lynx-II-LED-Backlight-Install/
Atary Lynx II - LED Backlight Install - More DIY How To Projects]]> http://cdn.instructables.com/FM4/46GC/I4PHLZZ0/FM446GCI4PHLZZ0.SQUARE2.jpg http://cdn.instructables.com/FM4/46GC/I4PHLZZ0/FM446GCI4PHLZZ0.SQUARE.jpg http://cdn.instructables.com/FM4/46GC/I4PHLZZ0/FM446GCI4PHLZZ0.SMALL.jpg Anubis The old lightning tube on an Atari Lynx is pretty terrible. Replacing it with a back-light is cost-effective and increases the screen visibility. This is fairly simple to do, but does require some soldering.If you want to increase battery life, you'll probably also need to remove the coil, etc (no...
By: Anubis

Continue Reading »]]>
Sat, 10 Jan 2015 19:01:03 PST
Mini Lego Flashdrive http://www.instructables.com/id/Mini-Lego-Flashdrive/
Mini Lego Flashdrive - More DIY How To Projects]]> http://cdn.instructables.com/FW7/ZAEC/I4MMRXPX/FW7ZAECI4MMRXPX.SQUARE2.jpg http://cdn.instructables.com/FW7/ZAEC/I4MMRXPX/FW7ZAECI4MMRXPX.SQUARE.jpg http://cdn.instructables.com/FW7/ZAEC/I4MMRXPX/FW7ZAECI4MMRXPX.SMALL.jpg n2o1gaming This Instruct-able will teach you how to turn your average flash drive into a new fun LEGO version. I did this project myself about 4 years ago and it was my first mod. I have included a download to the original project power point. Stuff needed:A USB flash drive (PNY brand work great, they are e...
By: n2o1gaming

Continue Reading »]]>
Thu, 8 Jan 2015 11:02:17 PST
How to enter God Mode with Windows 7 http://www.instructables.com/id/How-to-enter-God-Mode-with-Windows-7/
How to enter God Mode with Windows 7 - More DIY How To Projects]]> http://cdn.instructables.com/FCM/7ZLD/I4J78PJC/FCM7ZLDI4J78PJC.SQUARE2.jpg http://cdn.instructables.com/FCM/7ZLD/I4J78PJC/FCM7ZLDI4J78PJC.SQUARE.jpg http://cdn.instructables.com/FCM/7ZLD/I4J78PJC/FCM7ZLDI4J78PJC.SMALL.jpg brummshouse It may sound a bit too much, but Windows 7's God Mode is indeed omnipresent. It puts hundreds of settings from all around the operating system all in one place. Making you God. Of your little computer. Good job. Create a folder To turn on God Mode create a new folder on your desktop, or anywhere ...
By: brummshouse

Continue Reading »]]>
Wed, 7 Jan 2015 04:58:19 PST
Nerfnerfnerf http://www.instructables.com/id/Nerfnerfnerf/
Nerfnerfnerf - More DIY How To Projects]]> http://cdn.instructables.com/FOY/27FV/I4MMTWO8/FOY27FVI4MMTWO8.SQUARE2.jpg http://cdn.instructables.com/FOY/27FV/I4MMTWO8/FOY27FVI4MMTWO8.SQUARE.jpg http://cdn.instructables.com/FOY/27FV/I4MMTWO8/FOY27FVI4MMTWO8.SMALL.jpg GuavChenko This instructable is about my collection, mods and loadouts Reconissance Epique Excuse my French This is my primary. It is a modded Nerf recon with a nitefinder integration. The nitefinder is on a tact rail and has a torch in it. The stock and barrel are unmodified, but I added a sling point to t...
By: GuavChenko

Continue Reading »]]>
Tue, 6 Jan 2015 15:49:31 PST
Borderlands 2: Gaige's Class Mod Lunch Box http://www.instructables.com/id/Gaiges-Class-Mod-Lunch-Box/
Borderlands 2: Gaige's Class Mod Lunch Box - More DIY How To Projects]]> http://cdn.instructables.com/F4F/3ZHV/I4LKMB2Y/F4F3ZHVI4LKMB2Y.SQUARE2.jpg http://cdn.instructables.com/F4F/3ZHV/I4LKMB2Y/F4F3ZHVI4LKMB2Y.SQUARE.jpg http://cdn.instructables.com/F4F/3ZHV/I4LKMB2Y/F4F3ZHVI4LKMB2Y.SMALL.jpg Toffee-Chan My friend and I are going to this years Anime North as Gaige and Kreig. I thought I would share my process on creating her lunchbox. Sand and Prime I started off by sanding each side then priming it with latex primer. Trace around the top lid of the box and make your rough pattern of your ch...
By: Toffee-Chan

Continue Reading »]]>
Tue, 6 Jan 2015 14:57:34 PST
Nerf Mega Magnus Upgrade http://www.instructables.com/id/Nerf-Mega-Magnus-Upgrade/
Nerf Mega Magnus Upgrade - More DIY How To Projects]]> http://cdn.instructables.com/FC6/T32Y/I4IXFNT1/FC6T32YI4IXFNT1.SQUARE2.jpg http://cdn.instructables.com/FC6/T32Y/I4IXFNT1/FC6T32YI4IXFNT1.SQUARE.jpg http://cdn.instructables.com/FC6/T32Y/I4IXFNT1/FC6T32YI4IXFNT1.SMALL.jpg greystoic This Instructable will cover how to upgrade your Nerf Mega Magnus by replacing the spring, and removing the Air Restrictor. Note: If you upgrade to a 15lb/7kg spring, then you won't need to remove the Air Restrictor, as a spring that strong overcomes the Air Restrictor resistance, even without rem...
By: greystoic

Continue Reading »]]>
Tue, 6 Jan 2015 11:45:08 PST
DSi Color Tint http://www.instructables.com/id/DSi-Color-Tint/
DSi Color Tint - More DIY How To Projects]]> http://cdn.instructables.com/FR6/OBS6/I4L76Q2C/FR6OBS6I4L76Q2C.SQUARE2.jpg http://cdn.instructables.com/FR6/OBS6/I4L76Q2C/FR6OBS6I4L76Q2C.SQUARE.jpg http://cdn.instructables.com/FR6/OBS6/I4L76Q2C/FR6OBS6I4L76Q2C.SMALL.jpg fun_ride In this tutorial, I shall be teaching you how to tint the text on a Nintendo DSi.You will need:- Nintendo DSI- Tissues- Pens (any colour) Step 1: Find the area you want to tint. For my area, I used a red pen and coloured in the Nintendo logo. I recommend that you find another place as the back is...
By: fun_ride

Continue Reading »]]>
Tue, 6 Jan 2015 07:49:28 PST
Minecraft How to install a Map http://www.instructables.com/id/Minecraft-How-to-install-a-Map/
Minecraft How to install a Map - More DIY How To Projects]]> http://cdn.instructables.com/FXF/QGGB/I4MMNRE4/FXFQGGBI4MMNRE4.SQUARE2.jpg http://cdn.instructables.com/FXF/QGGB/I4MMNRE4/FXFQGGBI4MMNRE4.SQUARE.jpg http://cdn.instructables.com/FXF/QGGB/I4MMNRE4/FXFQGGBI4MMNRE4.SMALL.jpg zews Have You ever wanted to download that cool Replica of the Yoglabs or that cool castle Map In minecraft. If your answer is no then keep reading, if not you should still keep reading so you don't have a problem in the future. Minecraft Premade maps from people like Podcrash and Hypixel are some of the...
By: zews

Continue Reading »]]>
Mon, 5 Jan 2015 13:45:28 PST
Guitar pick mod(Stop the pick from falling into the guitar) http://www.instructables.com/id/Guitar-pick-modStop-the-pick-from-falling-into-the/
Guitar pick mod(Stop the pick from falling into the guitar) - More DIY How To Projects]]> http://cdn.instructables.com/FF2/SQPS/I4LKIC7C/FF2SQPSI4LKIC7C.SQUARE2.jpg http://cdn.instructables.com/FF2/SQPS/I4LKIC7C/FF2SQPSI4LKIC7C.SQUARE.jpg http://cdn.instructables.com/FF2/SQPS/I4LKIC7C/FF2SQPSI4LKIC7C.SMALL.jpg randomprojectguy what you will needGuitar pickThread or a thin string (about a foot)Paracord or rope for braceletSome item to put a hole in the pick ( I used a screw and block of wood a hammer and nail works too as long as the hole is bigger than the thread) Poke hole in pick Sorry about the bad pictures Use you...
By: randomprojectguy

Continue Reading »]]>
Sun, 4 Jan 2015 15:55:53 PST
How to Install mods on your Minecraft http://www.instructables.com/id/How-to-Install-mods-on-your-Minecraft/
How to Install mods on your Minecraft - More DIY How To Projects]]> http://cdn.instructables.com/FUU/S6WC/I4IWY68R/FUUS6WCI4IWY68R.SQUARE2.jpg http://cdn.instructables.com/FUU/S6WC/I4IWY68R/FUUS6WCI4IWY68R.SQUARE.jpg http://cdn.instructables.com/FUU/S6WC/I4IWY68R/FUUS6WCI4IWY68R.SMALL.jpg zews Have you ever wanted to play on that modded severs or try out that mod that you see in those you tube videos, but you dont know how they Mod their Games. I'm here to tell you how. Whenever i download things from the internet il run a scan over them to make i didn't download some Malware or Trojans, ...
By: zews

Continue Reading »]]>
Sat, 3 Jan 2015 10:18:10 PST
How to Disassemble A Game Boy (DMG) http://www.instructables.com/id/How-to-Disassemble-A-Game-Boy-DMG/
How to Disassemble A Game Boy (DMG) - More DIY How To Projects]]> http://cdn.instructables.com/FXJ/GW3L/I3TIAOQL/FXJGW3LI3TIAOQL.SQUARE2.jpg http://cdn.instructables.com/FXJ/GW3L/I3TIAOQL/FXJGW3LI3TIAOQL.SQUARE.jpg http://cdn.instructables.com/FXJ/GW3L/I3TIAOQL/FXJGW3LI3TIAOQL.SMALL.jpg asmretro If you like what we do, find our shop at http://asmretro.com or find us on Facebook and Instagram!Required Tools: Triwing Screwdriver For the Main Housing* Philips head screwdriver* Note that older revisions of the Game Boy have Philips head screws.Optional Parts: Magnet, or tin (For screws) Smaller...
By: asmretro

Continue Reading »]]>
Fri, 26 Dec 2014 19:58:38 PST
How to Backlight a Game Boy (DMG) http://www.instructables.com/id/How-to-Backlight-a-Game-Boy-DMG/
How to Backlight a Game Boy (DMG) - More DIY How To Projects]]> http://cdn.instructables.com/FCT/LBAY/I45HNUI8/FCTLBAYI45HNUI8.SQUARE2.jpg http://cdn.instructables.com/FCT/LBAY/I45HNUI8/FCTLBAYI45HNUI8.SQUARE.jpg http://cdn.instructables.com/FCT/LBAY/I45HNUI8/FCTLBAYI45HNUI8.SMALL.jpg asmretro If you like what we do, find our shop at http://asmretro.com or find us on Facebook and Instagram!Required Parts: ASM Retro "Density" Backlight Kit Triwing Screwdriver Philips head Screwdriver Smaller Philips head Screwdriver Soldering Iron SolderOption...
By: asmretro

Continue Reading »]]>
Fri, 26 Dec 2014 16:52:55 PST
Nerf Singled Sledgefire Shell http://www.instructables.com/id/Nerf-Singled-Sledgefire-Shell/
Nerf Singled Sledgefire Shell - More DIY How To Projects]]> http://cdn.instructables.com/FCX/LLEO/I3THJUEV/FCXLLEOI3THJUEV.SQUARE2.jpg http://cdn.instructables.com/FCX/LLEO/I3THJUEV/FCXLLEOI3THJUEV.SQUARE.jpg http://cdn.instructables.com/FCX/LLEO/I3THJUEV/FCXLLEOI3THJUEV.SMALL.jpg JackDC2000 This is a mod for a nerf sledgefire shell that will allow it to fire one dart instead of 3. This increases range because the sledgefire has a lot of power to propel 3 darts, but by doing this, you are putting all that power behind one dart, shooting it much further. This makes the gun more like a sn...
By: JackDC2000

Continue Reading »]]>
Sun, 21 Dec 2014 11:34:52 PST
Hack Your Bic http://www.instructables.com/id/Hack-Your-Bic/
Hack Your Bic - More DIY How To Projects]]> http://cdn.instructables.com/FMY/EFGO/I3THF36X/FMYEFGOI3THF36X.SQUARE2.jpg http://cdn.instructables.com/FMY/EFGO/I3THF36X/FMYEFGOI3THF36X.SQUARE.jpg http://cdn.instructables.com/FMY/EFGO/I3THF36X/FMYEFGOI3THF36X.SMALL.jpg kdeeny In this instructable I will teach you how to hack your bic lighter to make a bigger flame. There have been lots of rumors and doubts but this is the real how to on how to make your flame as big as you want with your BIC lighter! ! take top off! Take the top metal piece off with a pair of pliers ...
By: kdeeny

Continue Reading »]]>
Thu, 18 Dec 2014 16:26:41 PST
AKG K701/Q701/K702 Headband Mod http://www.instructables.com/id/AKG-K701Q701K702-Headband-Mod/
AKG K701/Q701/K702 Headband Mod - More DIY How To Projects]]> http://cdn.instructables.com/FBQ/L2JQ/I3TH6FHJ/FBQL2JQI3TH6FHJ.SQUARE2.jpg http://cdn.instructables.com/FBQ/L2JQ/I3TH6FHJ/FBQL2JQI3TH6FHJ.SQUARE.jpg http://cdn.instructables.com/FBQ/L2JQ/I3TH6FHJ/FBQL2JQI3TH6FHJ.SMALL.jpg ziyou.zou Hi all! I own this great pair of AKG Q701 headphones and like many other owners of this fantastic pair of cans, I am not fond of the bumps on the original leather headband. Here, I will guide you through the steps of making and installing a genuine leather headband. Here are the required tools:- Sci...
By: ziyou.zou

Continue Reading »]]>
Wed, 17 Dec 2014 23:05:50 PST
Minecraft BuildCraft 1.7.10 How to Build a Quarry http://www.instructables.com/id/Minecraft-BuildCraft-1710-How-to-Build-a-Quarry/
Minecraft BuildCraft 1.7.10 How to Build a Quarry - More DIY How To Projects]]> http://cdn.instructables.com/FC8/1ZIT/I3THDBFK/FC81ZITI3THDBFK.SQUARE2.jpg http://cdn.instructables.com/FC8/1ZIT/I3THDBFK/FC81ZITI3THDBFK.SQUARE.jpg http://cdn.instructables.com/FC8/1ZIT/I3THDBFK/FC81ZITI3THDBFK.SMALL.jpg zews This Instructables Focus is on Build Craft and its very popular Quarry. The Quarry is a very powerful tool in BuildCraft. It Mines for you in Broad area while you go off and do something else. In this instructables I am Going to show you how To assemble the Pieces Of a Quarry In the best way Possib...
By: zews

Continue Reading »]]>
Tue, 16 Dec 2014 11:00:10 PST
Surveillance/Audio and Video RC Car http://www.instructables.com/id/SurveillanceAudio-and-Video-RC-Car/
Surveillance/Audio and Video RC Car - More DIY How To Projects]]> http://cdn.instructables.com/FQ2/O62S/I3H5PPQ1/FQ2O62SI3H5PPQ1.SQUARE2.jpg http://cdn.instructables.com/FQ2/O62S/I3H5PPQ1/FQ2O62SI3H5PPQ1.SQUARE.jpg http://cdn.instructables.com/FQ2/O62S/I3H5PPQ1/FQ2O62SI3H5PPQ1.SMALL.jpg SymbolsNotAllowed First off, welcome to the tutorial on how to build your very own surveillance/audio and video car. By following these simple steps, you will be able to construct a remote control car that sends a live video and audio feed right to your phone. It can even project your voice from the monitor attached ...
By: SymbolsNotAllowed

Continue Reading »]]>
Mon, 15 Dec 2014 19:18:36 PST
REPAINT A PC FAN (MOD) http://www.instructables.com/id/REPAINT-A-PC-FAN-MOD/
REPAINT A PC FAN (MOD) - More DIY How To Projects]]> http://cdn.instructables.com/FL3/L7VB/I3PRLSYC/FL3L7VBI3PRLSYC.SQUARE2.jpg http://cdn.instructables.com/FL3/L7VB/I3PRLSYC/FL3L7VBI3PRLSYC.SQUARE.jpg http://cdn.instructables.com/FL3/L7VB/I3PRLSYC/FL3L7VBI3PRLSYC.SMALL.jpg shaman5188 WHY BUY A NEW FAN WHEN YOU CAN, FOR A COUPLE OF POUNDS REPAINT THE ONE YOU HAVE?THIS IS A MUCH OVERLOOKED OPTION FOR MODDERS, IT CAN GIVE A UNIQUE LOOK TO YOUR PC AND BLEND IN WITH ANY THEME YOU HAVE.IT IS A SIMPLE OPERATION WITH A BIT OF TIME AND PATIENCE AND A FEW BASIC TOOLS, YOU CAB ACHIEVE A GR...
By: shaman5188

Continue Reading »]]>
Mon, 15 Dec 2014 12:47:08 PST
Make your Scooter/ Motorcycle Headlight Brighter by 80% http://www.instructables.com/id/Make-your-Scooter-Motorcycle-Headlight-Brighter-by/
Make your Scooter/ Motorcycle Headlight Brighter by 80% - More DIY How To Projects]]> http://cdn.instructables.com/FMW/H2XX/I3KBY9NV/FMWH2XXI3KBY9NV.SQUARE2.jpg http://cdn.instructables.com/FMW/H2XX/I3KBY9NV/FMWH2XXI3KBY9NV.SQUARE.jpg http://cdn.instructables.com/FMW/H2XX/I3KBY9NV/FMWH2XXI3KBY9NV.SMALL.jpg bhvm I have this Lil' Scooter named Honda Activa.And like most other 2 wheelers, It has so called "Headlights" that are dim as candles.Stay with me and you'll learn how its easy to make them very bright and for not much. The culprit Most of the people might be thinking that the weak link for poor illu...
By: bhvm

Continue Reading »]]>
Sat, 13 Dec 2014 20:48:16 PST
DIY Mod Podge Phone Case http://www.instructables.com/id/DIY-Modge-Podge-Phone-Case/
DIY Mod Podge Phone Case - More DIY How To Projects]]> http://cdn.instructables.com/F2D/IEGU/I3H5EQ1V/F2DIEGUI3H5EQ1V.SQUARE2.jpg http://cdn.instructables.com/F2D/IEGU/I3H5EQ1V/F2DIEGUI3H5EQ1V.SQUARE.jpg http://cdn.instructables.com/F2D/IEGU/I3H5EQ1V/F2DIEGUI3H5EQ1V.SMALL.jpg Jamie Christine How to redecorate a cell phone case with paper and mod podge! (glitter optional) I am a big Harry Potter fan, and since my phone (an HTC One) has very limited options for fun cases, I made one myself! The above pictures will show either my HTC case (done with glitter and Harry Potter page with emble...
By: Jamie Christine

Continue Reading »]]>
Sat, 13 Dec 2014 19:03:53 PST
COMPUTER CASE WINDOW MOD http://www.instructables.com/id/COMPUTER-CASE-WINDOW-MOD/
COMPUTER CASE WINDOW MOD - More DIY How To Projects]]> http://cdn.instructables.com/FH2/P6SC/I3KBWMY3/FH2P6SCI3KBWMY3.SQUARE2.jpg http://cdn.instructables.com/FH2/P6SC/I3KBWMY3/FH2P6SCI3KBWMY3.SQUARE.jpg http://cdn.instructables.com/FH2/P6SC/I3KBWMY3/FH2P6SCI3KBWMY3.SMALL.jpg shaman5188 HOW TO MOD AND THEME A COMPUTER CASE WINDOW:IT IS TRUE THAT MOST MODDERS ARE CONSTANTLY LOOKING FOR THAT NEXT GREAT MOD, AS WITH MY PREVIOUS INSTRUCTABLE (TURNING ON A PC BY INSERTING A CARD).WITHOUT EXCEPTION THEY ALSO SEARCH FOR A UNIQUE LOOK OR THEME TO THEIR PC.MY INSPIRATION COMES FROM A WASTEL...
By: shaman5188

Continue Reading »]]>
Sat, 13 Dec 2014 11:25:21 PST
Nerf Strongarm scrap stock and attachment system http://www.instructables.com/id/Nerf-Strongarm-scrap-stock-and-attachment-system/
Nerf Strongarm scrap stock and attachment system - More DIY How To Projects]]> http://cdn.instructables.com/FQ1/DOZK/I3KBVGOC/FQ1DOZKI3KBVGOC.SQUARE2.jpg http://cdn.instructables.com/FQ1/DOZK/I3KBVGOC/FQ1DOZKI3KBVGOC.SQUARE.jpg http://cdn.instructables.com/FQ1/DOZK/I3KBVGOC/FQ1DOZKI3KBVGOC.SMALL.jpg peter---peter Hello everyone!This instructable will show you my scrap strongarm mods and how to make them yourself.I added a stock and a K'nex attachment system to the blasterAlso check out my Nerf website link Materials A list of materials:plastic pipe c.a. 5.5cmpvc pipe c.a. 3cmduct tapeknex(see parts in ste...
By: peter---peter

Continue Reading »]]>
Sat, 13 Dec 2014 07:10:44 PST
Xbox One Controller LED Color Mod(NO SOLDERING) http://www.instructables.com/id/Xbox-One-Controller-LED-Color-ModNO-SOLDERING/
Xbox One Controller LED Color Mod(NO SOLDERING) - More DIY How To Projects]]> http://cdn.instructables.com/FW8/GT05/I3BHEM4Y/FW8GT05I3BHEM4Y.SQUARE2.jpg http://cdn.instructables.com/FW8/GT05/I3BHEM4Y/FW8GT05I3BHEM4Y.SQUARE.jpg http://cdn.instructables.com/FW8/GT05/I3BHEM4Y/FW8GT05I3BHEM4Y.SMALL.jpg Frankv89 Change the color of the the Xbox One controller Guide button without soldering. Materials 1.1 Gather the material you will need -Torx Security T8 -Torx T6 -Super Glue -X-Acto Knife -Thin colored plastic (I used a Walmart cereal bag) -Control...
By: Frankv89

Continue Reading »]]>
Sun, 7 Dec 2014 18:10:45 PST
PROTECTION...turn PC on with a card http://www.instructables.com/id/Turn-your-computer-on-with-a-card/
PROTECTION...turn PC on with a card - More DIY How To Projects]]> http://cdn.instructables.com/FQB/4GG4/I3GX571X/FQB4GG4I3GX571X.SQUARE2.jpg http://cdn.instructables.com/FQB/4GG4/I3GX571X/FQB4GG4I3GX571X.SQUARE.jpg http://cdn.instructables.com/FQB/4GG4/I3GX571X/FQB4GG4I3GX571X.SMALL.jpg shaman5188 ARE YOU TIRED OF PUSHING A BUTTON TO TURN ON YOUR COMPUTER?....I AM!ARE YOU FED UP WITH OVER USING YOUR FINGER TO DO THINGS?.....I AM!So I decided to change the way I turn on my computer. I have always modded my computer , Lights, Bells Whistles all of that sort of thing. The one thing that is often...
By: shaman5188

Continue Reading »]]>
Sun, 7 Dec 2014 09:47:36 PST
Pc Steering Wheel Mod Gembird http://www.instructables.com/id/Pc-Steering-Wheel-Mog-Gembird/
Pc Steering Wheel Mod Gembird - More DIY How To Projects]]> http://cdn.instructables.com/F5B/VV9X/I3BHBGUV/F5BVV9XI3BHBGUV.SQUARE2.jpg http://cdn.instructables.com/F5B/VV9X/I3BHBGUV/F5BVV9XI3BHBGUV.SQUARE.jpg http://cdn.instructables.com/F5B/VV9X/I3BHBGUV/F5BVV9XI3BHBGUV.SMALL.jpg Kiko2730 Hi guys, this is my first instructables, its about a pc steering wheel i bought it for 5bucks and the other wheel i got it for free. Lets start. Disassembly Star by unscrewing the screws on the back of the wheel. Next detach the cables for the controls. Next unscrew the wheel from its stand-hub...
By: Kiko2730

Continue Reading »]]>
Sat, 6 Dec 2014 14:03:34 PST