Instructables: exploring - BC78627429331029BC6B001143E7E506 http://www.instructables.com Sun, 24 May 2015 02:49:12 PDT BLOX v1.01 Headless Electric Violin http://www.instructables.com/id/Headless-Electric-Violin/
Headless Electric Violin - More DIY How To Projects]]> http://cdn.instructables.com/FIS/KVPW/IA1IZHRO/FISKVPWIA1IZHRO.SQUARE2.jpg http://cdn.instructables.com/FIS/KVPW/IA1IZHRO/FISKVPWIA1IZHRO.SQUARE.jpg http://cdn.instructables.com/FIS/KVPW/IA1IZHRO/FISKVPWIA1IZHRO.SMALL.jpg Half-Life I had made an electric violin before, and armed with the lessons learned from that build, this is the 2nd, cooler version of this: http://www.instructables.com/id/Electric-Violin/Materials:approx 2 feet of 2*2 inch hardwood (Mahogany, Maple, Teak)One pre-made violin fingerboard (Ebay)One pre-made vi...
By: Half-Life

Continue Reading »]]>
Sun, 24 May 2015 02:12:42 PDT
http://www.instructables.com/id/My-Saw-Bench/
- More DIY How To Projects]]> http://cdn.instructables.com/FJ2/VVKO/HOUFZY2F/FJ2VVKOHOUFZY2F.SQUARE2.jpg http://cdn.instructables.com/FJ2/VVKO/HOUFZY2F/FJ2VVKOHOUFZY2F.SQUARE.jpg http://cdn.instructables.com/FJ2/VVKO/HOUFZY2F/FJ2VVKOHOUFZY2F.SMALL.jpg wavey davey now i turned my attention to the actual table. the beauty of making the square first was that i could now use it to mark out and indeed machine out the recess for the saw. i had already plunge cut through the plywood with the saw but with a thickness of 20mm it brought the saw blade under 2 inches b...
By: wavey davey

Continue Reading »]]>
Sun, 24 May 2015 01:02:38 PDT
Mary Poppins http://www.instructables.com/id/Mary-Poppins/ http://cdn.instructables.com/F5A/FTWL/IA1IYY2Z/F5AFTWLIA1IYY2Z.SQUARE2.jpg http://cdn.instructables.com/F5A/FTWL/IA1IYY2Z/F5AFTWLIA1IYY2Z.SQUARE.jpg http://cdn.instructables.com/F5A/FTWL/IA1IYY2Z/F5AFTWLIA1IYY2Z.SMALL.jpg KarenW12 FAKE GLASS BOTTLE / SUGAR GLASS How to make a diamond kite The true story of Mary Poppins DIY Paper Kites Chimney Sweeper Prop (Like in Mary Poppins) Mary Poppins Umbrella making props for a production of Mary Poppins
By: KarenW12

Continue Reading »]]>
Sat, 23 May 2015 23:44:03 PDT
Play on PS4 with your PS360+ Arcade Stick/Fight Stick mod http://www.instructables.com/id/Play-on-PS4-with-your-PS360-Arcade-StickFight-Stic/
Play on PS4 with your PS360+ Arcade Stick/Fight Stick mod - More DIY How To Projects]]> http://cdn.instructables.com/F65/U8AA/IA1IYWTL/F65U8AAIA1IYWTL.SQUARE2.jpg http://cdn.instructables.com/F65/U8AA/IA1IYWTL/F65U8AAIA1IYWTL.SQUARE.jpg http://cdn.instructables.com/F65/U8AA/IA1IYWTL/F65U8AAIA1IYWTL.SMALL.jpg anomaly.sticks This tutorial goes over upgrading the firmware on your PS360+ Board so that you can play compatible PS4 games without the 8 minute time out, and still be able to play non compatible games (still maintaining the time out). Please see the FAQ at the end for more information on the PS360+, what it is,...
By: anomaly.sticks

Continue Reading »]]>
Sat, 23 May 2015 23:38:54 PDT
Hats http://www.instructables.com/id/Hats/ http://cdn.instructables.com/FXG/7IBH/IA1IYKCS/FXG7IBHIA1IYKCS.SQUARE2.jpg http://cdn.instructables.com/FXG/7IBH/IA1IYKCS/FXG7IBHIA1IYKCS.SQUARE.jpg http://cdn.instructables.com/FXG/7IBH/IA1IYKCS/FXG7IBHIA1IYKCS.SMALL.jpg KarenW12 Totoro Hat Hex Hats Princess Hat on the Cheap How to make a Cadet-style cap Checkpoint Charlie Hat Make a Newsie Hat How to Make a Top Hat (on the cheap) Leather Steampunk Top Hat
By: KarenW12

Continue Reading »]]>
Sat, 23 May 2015 23:20:01 PDT
Make a simple night table/stand with pallets http://www.instructables.com/id/Make-a-simple-night-tablestand-with-reuse-pallets/
Make a simple night table/stand with pallets - More DIY How To Projects]]> http://cdn.instructables.com/FO6/PA7N/I9UDLUEX/FO6PA7NI9UDLUEX.SQUARE2.jpg http://cdn.instructables.com/FO6/PA7N/I9UDLUEX/FO6PA7NI9UDLUEX.SQUARE.jpg http://cdn.instructables.com/FO6/PA7N/I9UDLUEX/FO6PA7NI9UDLUEX.SMALL.jpg ongth Make a simple night table/stand with little cost by using discarded pallets.I like pallets because you can get them for free and when they are sandpapered down, it reveals a nice wood design. Little cracks and holes makes them look rustic as well. This project can be done in about 2 hours. It is so ...
By: ongth

Continue Reading »]]>
Sat, 23 May 2015 23:19:56 PDT
Door step Alert (done by swahili box) http://www.instructables.com/id/Door-step-Alert-done-by-swahili-box/
Door step Alert (done by swahili box) - More DIY How To Projects]]> http://cdn.instructables.com/FS8/4B0O/IA0WNQGH/FS84B0OIA0WNQGH.SQUARE2.jpg http://cdn.instructables.com/FS8/4B0O/IA0WNQGH/FS84B0OIA0WNQGH.SQUARE.jpg http://cdn.instructables.com/FS8/4B0O/IA0WNQGH/FS84B0OIA0WNQGH.SMALL.jpg AlyS4 The above is a door step alert/Alarm that has a light and sound aspect to it thus for those with physical dissabilityof hearing can also see the light go off thus know that there is a person at the door. Involves hooking up the Intel Gallileo board to the led and small chyme through a breadboard as ...
By: AlyS4

Continue Reading »]]>
Sat, 23 May 2015 23:06:30 PDT
IR Periscope http://www.instructables.com/id/IR-Periscope/
IR Periscope - More DIY How To Projects]]> http://cdn.instructables.com/FR5/N433/IA1IY8MY/FR5N433IA1IY8MY.SQUARE2.jpg http://cdn.instructables.com/FR5/N433/IA1IY8MY/FR5N433IA1IY8MY.SQUARE.jpg http://cdn.instructables.com/FR5/N433/IA1IY8MY/FR5N433IA1IY8MY.SMALL.jpg JonBush I hate exposed wires! You buy a beautiful TV that hangs on your wall and then you have wires running to it, up your wall that ruin it all! Well there are plenty of solutions out there for running wires inside of walls and all that. But that's not what I'm here to show you.Once you have all those ...
By: JonBush

Continue Reading »]]>
Sat, 23 May 2015 22:38:18 PDT
How to make a jellyfish plush http://www.instructables.com/id/How-to-make-a-jellyfish-plush/
How to make a jellyfish plush - More DIY How To Projects]]> http://cdn.instructables.com/FPT/4XXU/IA0WNG3G/FPT4XXUIA0WNG3G.SQUARE2.jpg http://cdn.instructables.com/FPT/4XXU/IA0WNG3G/FPT4XXUIA0WNG3G.SQUARE.jpg http://cdn.instructables.com/FPT/4XXU/IA0WNG3G/FPT4XXUIA0WNG3G.SMALL.jpg A_DeJesus This cute project can be made with knitted material, or with normal fabric! This project is good for novice knitters. Materials Needed You will need:1. Yarn or String (Any color is fine)2. 1 Square of fabric ( 8.5 in by 8.5 in)3. 5 Rectangles of fabric (1 in by 7 in), or 4 rectangles of fabric (3...
By: A_DeJesus

Continue Reading »]]>
Sat, 23 May 2015 22:24:24 PDT
Bacon Wrapped Hawaiian Cheese Burger Rolls http://www.instructables.com/id/Bacon-Wrapped-Hawaiian-Cheese-Burger-Rolls/
Bacon Wrapped Hawaiian Cheese Burger Rolls - More DIY How To Projects]]> http://cdn.instructables.com/F30/O24M/IA0WN7IL/F30O24MIA0WN7IL.SQUARE2.jpg http://cdn.instructables.com/F30/O24M/IA0WN7IL/F30O24MIA0WN7IL.SQUARE.jpg http://cdn.instructables.com/F30/O24M/IA0WN7IL/F30O24MIA0WN7IL.SMALL.jpg crapsoup Sweet and cheesy barbequed bacon burger goodness!! Things You Will Need Note: This recipe should make 10 rolls2 pounds Hamburger Meat10 Slices of Bacon1 Pineapple 10 Cheese slices (I used Swiss)1 tsp Salt 1 tsp Pepper 2 tsp Garlic powder2 TBSP Teriyaki sauce Prep Work 1. Season your meat wit...
By: crapsoup

Continue Reading »]]>
Sat, 23 May 2015 22:19:44 PDT
Duct Tape Book Cover http://www.instructables.com/id/Duct-Tape-Book-Cover-1/
Duct Tape Book Cover - More DIY How To Projects]]> http://cdn.instructables.com/FI6/JF6M/IA0WMXI2/FI6JF6MIA0WMXI2.SQUARE2.jpg http://cdn.instructables.com/FI6/JF6M/IA0WMXI2/FI6JF6MIA0WMXI2.SQUARE.jpg http://cdn.instructables.com/FI6/JF6M/IA0WMXI2/FI6JF6MIA0WMXI2.SMALL.jpg bobbi.stromer This book cover is heavy duty!Materials needed for this project:Newspaper or paper bagDuct tapeBook to be coveredSharpie or pen (not pictured). Sizing the Book Cover Start by opening up the newspaper completely. Place the book on the open newspaper. Fold the newspaper around the book to make sure...
By: bobbi.stromer

Continue Reading »]]>
Sat, 23 May 2015 22:02:19 PDT
Minecraft Monster Trap http://www.instructables.com/id/Minecraft-Monster-Trap/
Minecraft Monster Trap - More DIY How To Projects]]> http://cdn.instructables.com/FG7/NNIC/IA0WMTE0/FG7NNICIA0WMTE0.SQUARE2.jpg http://cdn.instructables.com/FG7/NNIC/IA0WMTE0/FG7NNICIA0WMTE0.SQUARE.jpg http://cdn.instructables.com/FG7/NNIC/IA0WMTE0/FG7NNICIA0WMTE0.SMALL.jpg Book Girl In this instructable I will show you how to make a monster trap in minecraft. This will help you get monster drops more easily or you could just watch monsters BURN in the sunlight. (This may seem odd but I like seeing them catch on fire, that's why I made this in the first place) Note: I made this ...
By: Book Girl

Continue Reading »]]>
Sat, 23 May 2015 21:59:55 PDT
Trash Bin to Designer Lamp http://www.instructables.com/id/Trash-Bin-to-Designer-Lamp/
Trash Bin to Designer Lamp - More DIY How To Projects]]> http://cdn.instructables.com/F37/GXJJ/IA0WJHS9/F37GXJJIA0WJHS9.SQUARE2.jpg http://cdn.instructables.com/F37/GXJJ/IA0WJHS9/F37GXJJIA0WJHS9.SQUARE.jpg http://cdn.instructables.com/F37/GXJJ/IA0WJHS9/F37GXJJIA0WJHS9.SMALL.jpg Tarun Upadhyaya Hello Makers,Those were the days when every little office wanted to go paperless, so a lot of wire mesh trash bins were removed to motivate people to use less and less paper for work. I grabbed one such bin from my office for home use. After that, well it was just dumped under super loads of things ...
By: Tarun Upadhyaya

Continue Reading »]]>
Sat, 23 May 2015 21:43:32 PDT
Duct-tape Bracelets http://www.instructables.com/id/Duct-tape-Bracelets-1/
Duct-tape Bracelets - More DIY How To Projects]]> http://cdn.instructables.com/FYW/6PII/IA0WJD9S/FYW6PIIIA0WJD9S.SQUARE2.jpg http://cdn.instructables.com/FYW/6PII/IA0WJD9S/FYW6PIIIA0WJD9S.SQUARE.jpg http://cdn.instructables.com/FYW/6PII/IA0WJD9S/FYW6PIIIA0WJD9S.SMALL.jpg bella_p These bracelets are a great, stylish edition to your jewellery box! They are easy to make and can be customised with many different colours, jewels etc. Gather Your Materials You will require:◘ A pair of Scissors◘ Some String◘ A permanent Marker (Any colour/s you choose)◘ A Ruler◘ Duct-tape (Do ...
By: bella_p

Continue Reading »]]>
Sat, 23 May 2015 21:39:23 PDT
Duct Tape Boat v2.0 http://www.instructables.com/id/Duct-Tape-Boat-v20/
Duct Tape Boat v2.0 - More DIY How To Projects]]> http://cdn.instructables.com/FF6/M78X/IA1IY0XS/FF6M78XIA1IY0XS.SQUARE2.jpg http://cdn.instructables.com/FF6/M78X/IA1IY0XS/FF6M78XIA1IY0XS.SQUARE.jpg http://cdn.instructables.com/FF6/M78X/IA1IY0XS/FF6M78XIA1IY0XS.SMALL.jpg CuriosityMachine Duct tape is a "magical" item because you can build some of the coolest things with it.This is the second boat in our duct tape boat series. We designed and built this in our engineering club, HEAT, to race in a local duct tape boat competition.note: we are a non profit organization dedicated to eng...
By: CuriosityMachine

Continue Reading »]]>
Sat, 23 May 2015 20:57:50 PDT
Upgrading RAM http://www.instructables.com/id/Upgrading-RAM-16/
Upgrading RAM - More DIY How To Projects]]> http://cdn.instructables.com/FBI/YV2M/IA0WMEGO/FBIYV2MIA0WMEGO.SQUARE2.jpg http://cdn.instructables.com/FBI/YV2M/IA0WMEGO/FBIYV2MIA0WMEGO.SQUARE.jpg http://cdn.instructables.com/FBI/YV2M/IA0WMEGO/FBIYV2MIA0WMEGO.SMALL.jpg raziel1629 Here are some simple instructions for upgrading the RAM in your desktop computer or laptop. The tools you will need for this project is a small screw driver(usually Philips). This process takes about 30 minutes as long as you have everything for each step. Check your systems hardware From the de...
By: raziel1629

Continue Reading »]]>
Sat, 23 May 2015 20:46:44 PDT
Wooden Heart Art http://www.instructables.com/id/Wooden-Heart-Art/
Wooden Heart Art - More DIY How To Projects]]> http://cdn.instructables.com/FL4/23IP/IA0WI7EK/FL423IPIA0WI7EK.SQUARE2.jpg http://cdn.instructables.com/FL4/23IP/IA0WI7EK/FL423IPIA0WI7EK.SQUARE.jpg http://cdn.instructables.com/FL4/23IP/IA0WI7EK/FL423IPIA0WI7EK.SMALL.jpg ommatso I'm a crafty person.No, I don't plan diabolical downfalls of my archenemies (can one really have an archenemy?), but I love to make crafts, especially as gifts to my friends, whether or not they really turn out all that great. Like the rest of the crafty people community, I stock up on supplies I pr...
By: ommatso

Continue Reading »]]>
Sat, 23 May 2015 20:39:27 PDT
French Lemonade http://www.instructables.com/id/French-Lemonade/
French Lemonade - More DIY How To Projects]]> http://cdn.instructables.com/F8C/ERJ2/IA0WIX0Q/F8CERJ2IA0WIX0Q.SQUARE2.jpg http://cdn.instructables.com/F8C/ERJ2/IA0WIX0Q/F8CERJ2IA0WIX0Q.SQUARE.jpg http://cdn.instructables.com/F8C/ERJ2/IA0WIX0Q/F8CERJ2IA0WIX0Q.SMALL.jpg 5621201016 ''French Lemonade'' is a healthy , and easy to make energy drink.To make it , you only need four ingredients.so lets get started and make some lemonade! Gather your ingredients To make French Lemonade , you only need four easy ingredients. You will need- ...
By: 5621201016

Continue Reading »]]>
Sat, 23 May 2015 20:33:22 PDT
How NOT to Build an Airplane http://www.instructables.com/id/How-NOT-to-Build-an-Airplane/
How NOT to Build an Airplane - More DIY How To Projects]]> http://cdn.instructables.com/FVQ/STC0/I9XQD25T/FVQSTC0I9XQD25T.SQUARE2.jpg http://cdn.instructables.com/FVQ/STC0/I9XQD25T/FVQSTC0I9XQD25T.SQUARE.jpg http://cdn.instructables.com/FVQ/STC0/I9XQD25T/FVQSTC0I9XQD25T.SMALL.jpg gizmologist So, you've finally decided to build that dream airplane! Not a model this time, one you can actually sit in and fly! Good for you! You are embarking on a Grand Adventure. Since your goal undoubtedly is to spend enormous amounts of money and make a complete fiasco of it, here are some tips to virtual...
By: gizmologist

Continue Reading »]]>
Sat, 23 May 2015 20:15:09 PDT
Space http://www.instructables.com/id/Space-1/ http://cdn.instructables.com/FWZ/CQFN/IA1IXKS4/FWZCQFNIA1IXKS4.SQUARE2.jpg http://cdn.instructables.com/FWZ/CQFN/IA1IXKS4/FWZCQFNIA1IXKS4.SQUARE.jpg http://cdn.instructables.com/FWZ/CQFN/IA1IXKS4/FWZCQFNIA1IXKS4.SMALL.jpg CFL_Browncoat Barebones High-Altitude Balloon Cam How to build a huge water rocket DIY Cool Near Space Project Rockit: 3D-Printed Model Rocket Construction Kit 3d printed model rockets & stand Printed Rocket Rocket Propellant Characterization, C++ Excel Automation, Boost Property Tree a...
By: CFL_Browncoat

Continue Reading »]]>
Sat, 23 May 2015 20:10:58 PDT
How To: Super Bright Buttercream http://www.instructables.com/id/How-To-Super-Bright-Buttercream/
How To: Super Bright Buttercream - More DIY How To Projects]]> http://cdn.instructables.com/FFO/7EGW/IA0WITAV/FFO7EGWIA0WITAV.SQUARE2.jpg http://cdn.instructables.com/FFO/7EGW/IA0WITAV/FFO7EGWIA0WITAV.SQUARE.jpg http://cdn.instructables.com/FFO/7EGW/IA0WITAV/FFO7EGWIA0WITAV.SMALL.jpg punkgirl So lately I've been teaching myself how to decorate cakes and I've come across some really great tips. One in particular is how to get the most vibrant colours out of buttercream frosting. Your Arsenal First step to super bright buttercream is to have a good arsenal of food colour.Liquid food co...
By: punkgirl

Continue Reading »]]>
Sat, 23 May 2015 19:51:03 PDT
How to Soak and Plant ITTY-BITTY Seeds http://www.instructables.com/id/How-to-Soak-and-Plant-ITTY-BITTY-Seeds/
How to Soak and Plant ITTY-BITTY Seeds - More DIY How To Projects]]> http://cdn.instructables.com/F25/K4VB/IA0WINEI/F25K4VBIA0WINEI.SQUARE2.jpg http://cdn.instructables.com/F25/K4VB/IA0WINEI/F25K4VBIA0WINEI.SQUARE.jpg http://cdn.instructables.com/F25/K4VB/IA0WINEI/F25K4VBIA0WINEI.SMALL.jpg beamerpook An old, not-very-secret trick gardeners have is to soak seeds overnight before planting; it softens the seed coat and makes seeds sprout 2 or 3 times faster than normal. I am horribly impatient, so I always soak my seeds. And it's easy enough to do with big honking seeds like peas and pumpkin, but...
By: beamerpook

Continue Reading »]]>
Sat, 23 May 2015 19:13:32 PDT
How to Draw Kirby http://www.instructables.com/id/How-to-Draw-Kirby-1/
How to Draw Kirby - More DIY How To Projects]]> http://cdn.instructables.com/F5O/8SCO/IA0WII2M/F5O8SCOIA0WII2M.SQUARE2.jpg http://cdn.instructables.com/F5O/8SCO/IA0WII2M/F5O8SCOIA0WII2M.SQUARE.jpg http://cdn.instructables.com/F5O/8SCO/IA0WII2M/F5O8SCOIA0WII2M.SMALL.jpg sehunniee I will be showing you step by step on how to draw Kirby with optional simple coloring version of just a sketch.Materials:- Paper.- Pencil (doesn't have to a sketching pencil. it could be just a regular pencil or mechanical pencil.)- Eraser. - Color pencils. (for the option if you want to color it in...
By: sehunniee

Continue Reading »]]>
Sat, 23 May 2015 18:56:22 PDT
Buffing out scuff marks and paint from your vehicle http://www.instructables.com/id/Buffing-out-scuff-marks-and-paint-from-your-vehicl/
Buffing out scuff marks and paint from your vehicle - More DIY How To Projects]]> http://cdn.instructables.com/FGO/86TD/IA1IX674/FGO86TDIA1IX674.SQUARE2.jpg http://cdn.instructables.com/FGO/86TD/IA1IX674/FGO86TDIA1IX674.SQUARE.jpg http://cdn.instructables.com/FGO/86TD/IA1IX674/FGO86TDIA1IX674.SMALL.jpg DevilRidesWith It happens to all of us from time to time, either someone scrapes your car while you've left it in the carpark (parking lot, for my American friends), and you come out to see a lovely bright mark on your paint, red, green, white, or in this case, yellow! I promised my wife that I wouldn't tell you t...
By: DevilRidesWith

Continue Reading »]]>
Sat, 23 May 2015 18:53:15 PDT
Dual TDA2030A 2.0 AC/DC Power Amplifier. http://www.instructables.com/id/Dual-TDA2030A-20-ACDC-Power-Amplifier/
Dual TDA2030A 2.0 AC/DC Power Amplifier. - More DIY How To Projects]]> http://cdn.instructables.com/FKU/J52K/IA0WM27G/FKUJ52KIA0WM27G.SQUARE2.jpg http://cdn.instructables.com/FKU/J52K/IA0WM27G/FKUJ52KIA0WM27G.SQUARE.jpg http://cdn.instructables.com/FKU/J52K/IA0WM27G/FKUJ52KIA0WM27G.SMALL.jpg Volthaus Electronics Laboratory This is the Dual TDA2030A 2.0 AC/DC Power Amplifier DIY kit I Purchased off of eBay. The assembly was quick and easy. The instruction were simple enough and showed plainly the location of the components Dual TDA2030A 2.0 AC/DC Power Amplifier Kit T...
By: Volthaus Electronics Laboratory

Continue Reading »]]>
Sat, 23 May 2015 18:41:09 PDT
How to bunny hop http://www.instructables.com/id/How-to-bunny-hop-1/
How to bunny hop - More DIY How To Projects]]> http://cdn.instructables.com/FLU/FIXX/IA0WI3GY/FLUFIXXIA0WI3GY.SQUARE2.jpg http://cdn.instructables.com/FLU/FIXX/IA0WI3GY/FLUFIXXIA0WI3GY.SQUARE.jpg http://cdn.instructables.com/FLU/FIXX/IA0WI3GY/FLUFIXXIA0WI3GY.SMALL.jpg masteringphysics 1.) You are going to lean back and pull on your handle bars The load push 2.) Then you are going to push down ( its called loading) on the back tire and push off to gain air. Bringing it forward 3.) Finally you are going to push down on the front handle bar to level out.
By: masteringphysics

Continue Reading »]]>
Sat, 23 May 2015 18:40:19 PDT
$5 Slingshot http://www.instructables.com/id/5-Slingshot/
$5 Slingshot - More DIY How To Projects]]> http://cdn.instructables.com/FBV/ET7K/IA0WLRQJ/FBVET7KIA0WLRQJ.SQUARE2.jpg http://cdn.instructables.com/FBV/ET7K/IA0WLRQJ/FBVET7KIA0WLRQJ.SQUARE.jpg http://cdn.instructables.com/FBV/ET7K/IA0WLRQJ/FBVET7KIA0WLRQJ.SMALL.jpg ZachShazzy Stuff You'll Need -T shaped connector-2 threaded hook things (IDK what they are called) -slingshot band-zip ties-duct tape-paracord-hammer-3-4 inches of 3/4 pvc pipe Body This is my first instructable BTW so I hope everything turns out alright.Take the two threaded hook things and slide (or h...
By: ZachShazzy

Continue Reading »]]>
Sat, 23 May 2015 18:10:51 PDT
Custom Packaging http://www.instructables.com/id/Custom-Cardboard-Packaging/
Custom Packaging - More DIY How To Projects]]> http://cdn.instructables.com/FV7/B358/IA0WHWDI/FV7B358IA0WHWDI.SQUARE2.jpg http://cdn.instructables.com/FV7/B358/IA0WHWDI/FV7B358IA0WHWDI.SQUARE.jpg http://cdn.instructables.com/FV7/B358/IA0WHWDI/FV7B358IA0WHWDI.SMALL.jpg cndjian Silkscreen and cardboard packaging. Create the Package form Research and draw. Take a look online at boxes and decide on the right one for your product. I chose a front flap box. Once I was happy with the shape, I sketched several versions of dimensions for the template to make the box using plai...
By: cndjian

Continue Reading »]]>
Sat, 23 May 2015 17:35:35 PDT
Soot Sprites http://www.instructables.com/id/Soot-Sprites/
Soot Sprites - More DIY How To Projects]]> http://cdn.instructables.com/FYL/T7AU/IA0WGMUT/FYLT7AUIA0WGMUT.SQUARE2.jpg http://cdn.instructables.com/FYL/T7AU/IA0WGMUT/FYLT7AUIA0WGMUT.SQUARE.jpg http://cdn.instructables.com/FYL/T7AU/IA0WGMUT/FYLT7AUIA0WGMUT.SMALL.jpg chemicalrevenger From the movie spirited away, one of the best animated films. Really simple and takes about 20-25 minutes. #breadwinners Supplies - Markers - Glue stick or glue- A Rectangular Block of Styrofoam- Small Styrofoam Balls (About an inch and a half in diameter is good)- Black Paint - Paint brush (You ...
By: chemicalrevenger

Continue Reading »]]>
Sat, 23 May 2015 17:19:05 PDT
Home Workshop http://www.instructables.com/id/Machines/ http://cdn.instructables.com/F69/IRCG/IA1IWIU6/F69IRCGIA1IWIU6.SQUARE2.jpg http://cdn.instructables.com/F69/IRCG/IA1IWIU6/F69IRCGIA1IWIU6.SQUARE.jpg http://cdn.instructables.com/F69/IRCG/IA1IWIU6/F69IRCGIA1IWIU6.SMALL.jpg CFL_Browncoat null null null null null null null null DIY PCB lab for under $35.00 Dual Screen Monitor Stand Hanging camera slider with arm extension Arduino Run Accurate Liquid/Powder Dispenser System CNC Plasma Table Homemade Press Drill Mini Milling Mill R...
By: CFL_Browncoat

Continue Reading »]]>
Sat, 23 May 2015 17:13:42 PDT
How to Design, Print, and Use 3D Printed Leather Stamps! http://www.instructables.com/id/How-to-Design-Print-and-Use-3D-Printed-Leather-Sta/
How to Design, Print, and Use 3D Printed Leather Stamps! - More DIY How To Projects]]> http://cdn.instructables.com/F2S/822B/IA1IWEI3/F2S822BIA1IWEI3.SQUARE2.jpg http://cdn.instructables.com/F2S/822B/IA1IWEI3/F2S822BIA1IWEI3.SQUARE.jpg http://cdn.instructables.com/F2S/822B/IA1IWEI3/F2S822BIA1IWEI3.SMALL.jpg Matt2 Silver Tooling leather and producing beautiful and intricate patterns by hand can be very challenging. Having now done several leather projects, I have learned a lot about working with leather, and as such I'm always looking for new and better ways to produce designs that are beautiful, professional, and ...
By: Matt2 Silver

Continue Reading »]]>
Sat, 23 May 2015 17:11:47 PDT
3D Printers http://www.instructables.com/id/3D-Printers-1/ http://cdn.instructables.com/FCB/7YLX/IA1IVW0C/FCB7YLXIA1IVW0C.SQUARE2.jpg http://cdn.instructables.com/FCB/7YLX/IA1IVW0C/FCB7YLXIA1IVW0C.SQUARE.jpg http://cdn.instructables.com/FCB/7YLX/IA1IVW0C/FCB7YLXIA1IVW0C.SMALL.jpg CFL_Browncoat null null null null null Printable accessories null null null null null 3D Printing Glue 3D Printing Farm Changing 3D RoBo 3D printer filament on the fly Homemade 3D Printer Filament Extruder How to choose, use and improve a 3D printer Vu...
By: CFL_Browncoat

Continue Reading »]]>
Sat, 23 May 2015 15:54:45 PDT
Paper sketch to Prototype: 3D Printed Knob http://www.instructables.com/id/Paper-sketch-to-Prototype-3D-Printed-Knob/
Paper sketch to Prototype: 3D Printed Knob - More DIY How To Projects]]> http://cdn.instructables.com/FV1/JYTA/IA0WL6QW/FV1JYTAIA0WL6QW.SQUARE2.jpg http://cdn.instructables.com/FV1/JYTA/IA0WL6QW/FV1JYTAIA0WL6QW.SQUARE.jpg http://cdn.instructables.com/FV1/JYTA/IA0WL6QW/FV1JYTAIA0WL6QW.SMALL.jpg MuraliSrinivasa Recently I designed a low-cost electronic knob using Texas Instruments inductive sensing IC, LDC1312. For the Mechanical part of it I used ProtoDnD and got help from a 3D designer to convert my idea into a 3D model. Here is how a paper sketch was converted to a 3D model and 3D printed. Visit Prot...
By: MuraliSrinivasa

Continue Reading »]]>
Sat, 23 May 2015 15:51:56 PDT
Home Automation http://www.instructables.com/id/Home-Automation-4-5/ http://cdn.instructables.com/FBX/457X/IA1IVTBC/FBX457XIA1IVTBC.SQUARE2.jpg http://cdn.instructables.com/FBX/457X/IA1IVTBC/FBX457XIA1IVTBC.SQUARE.jpg http://cdn.instructables.com/FBX/457X/IA1IVTBC/FBX457XIA1IVTBC.SMALL.jpg CFL_Browncoat null null null null null null null Raspberry Pi Android App communication A Guide to Raspberry Pi Arduino Communication in Embedded Systems Internet-connected home energy monitor Use RPi, Azure, and Cortana to Automate your Home! Nest Wifi Proximity C#...
By: CFL_Browncoat

Continue Reading »]]>
Sat, 23 May 2015 15:50:37 PDT
LED-matrix on a budget http://www.instructables.com/id/LED-matrix-on-a-budget/
LED-matrix on a budget - More DIY How To Projects]]> http://cdn.instructables.com/FIR/VMR8/IA0WGDLN/FIRVMR8IA0WGDLN.SQUARE2.jpg http://cdn.instructables.com/FIR/VMR8/IA0WGDLN/FIRVMR8IA0WGDLN.SQUARE.jpg http://cdn.instructables.com/FIR/VMR8/IA0WGDLN/FIRVMR8IA0WGDLN.SMALL.jpg lmaywald A unique piece of furniture without spending a whole lot of money?! That is what i wanted to achive in this project. Also i am not completely unfamiliar with programming and electronics and ,like most of us do, i think that LEDs are just awesome. So without further ado, lets get started, shall we? ...
By: lmaywald

Continue Reading »]]>
Sat, 23 May 2015 15:50:24 PDT
Prevent Mobile over charging http://www.instructables.com/id/Prevent-Mobile-over-charging/
Prevent Mobile over charging - More DIY How To Projects]]> http://cdn.instructables.com/F55/H6T2/IA1IVM78/F55H6T2IA1IVM78.SQUARE2.jpg http://cdn.instructables.com/F55/H6T2/IA1IVM78/F55H6T2IA1IVM78.SQUARE.jpg http://cdn.instructables.com/F55/H6T2/IA1IVM78/F55H6T2IA1IVM78.SMALL.jpg Narzan Qarma This is my second time I change my mobile because I forget it all the night on charger.There is no charger in the market that stops charging your mobile when the battery is fully charged, and because I love My Lumia 520 so much, I decided to protect my little hero with a smarter charger.So, I brough...
By: Narzan Qarma

Continue Reading »]]>
Sat, 23 May 2015 15:44:18 PDT
Prep http://www.instructables.com/id/Prep/ http://cdn.instructables.com/FS7/1L7D/IA1IVH5W/FS71L7DIA1IVH5W.SQUARE2.jpg http://cdn.instructables.com/FS7/1L7D/IA1IVH5W/FS71L7DIA1IVH5W.SQUARE.jpg http://cdn.instructables.com/FS7/1L7D/IA1IVH5W/FS71L7DIA1IVH5W.SMALL.jpg CFL_Browncoat null null null null null null null null null null null null null null null null null null null null null null null null null null null null null How to build a Hydraulic Ram Pump ...
By: CFL_Browncoat

Continue Reading »]]>
Sat, 23 May 2015 15:38:45 PDT
Education http://www.instructables.com/id/Education-1/ http://cdn.instructables.com/FXX/BYB5/IA1IV8BV/FXXBYB5IA1IV8BV.SQUARE2.jpg http://cdn.instructables.com/FXX/BYB5/IA1IV8BV/FXXBYB5IA1IV8BV.SQUARE.jpg http://cdn.instructables.com/FXX/BYB5/IA1IV8BV/FXXBYB5IA1IV8BV.SMALL.jpg CFL_Browncoat null null null null null null null For projects Intro To Transformers Sending data from Arduino to Excel (and plotting it) Solder USB-cable to Arduino UNO (clone) CNC it however it lays: adjusting CAM toolpaths for skewed or hard-to-align stock. CNC techni...
By: CFL_Browncoat

Continue Reading »]]>
Sat, 23 May 2015 15:23:48 PDT
Using a temperature sensor to control the speed of a motor using arduino http://www.instructables.com/id/Using-a-temperature-sensor-to-control-the-speed-of/
Using a temperature sensor to control the speed of a motor using arduino - More DIY How To Projects]]> http://cdn.instructables.com/FX8/Y2AP/IA1IV2LP/FX8Y2APIA1IV2LP.SQUARE2.jpg http://cdn.instructables.com/FX8/Y2AP/IA1IV2LP/FX8Y2APIA1IV2LP.SQUARE.jpg http://cdn.instructables.com/FX8/Y2AP/IA1IV2LP/FX8Y2APIA1IV2LP.SMALL.jpg Hesham_Gaber This application is simple just by using temperature sensor LM35 with an arduino kit to control a fan and change its speed with respect to the temperature read by the micro-controller which in this case is the arduino kit .The temperature sensor LM35 is connected with the arduino with an analog inpu...
By: Hesham_Gaber

Continue Reading »]]>
Sat, 23 May 2015 15:18:00 PDT
Football Catching Trainers http://www.instructables.com/id/Football-Catching-Trainers/
Football Catching Trainers - More DIY How To Projects]]> http://cdn.instructables.com/FHB/FNGR/IA0WG8BM/FHBFNGRIA0WG8BM.SQUARE2.jpg http://cdn.instructables.com/FHB/FNGR/IA0WG8BM/FHBFNGRIA0WG8BM.SQUARE.jpg http://cdn.instructables.com/FHB/FNGR/IA0WG8BM/FHBFNGRIA0WG8BM.SMALL.jpg Kevin sandoval This is a piece of equipment to help football players learn to catch with their fingers and not their palms #ferociousdoughnuts The materials you will need are •duct tape •tennis ball•knife or scissors Prepare The Tennis Ball Grab the tennis ball and with the knife or scissors cut it in half and...
By: Kevin sandoval

Continue Reading »]]>
Sat, 23 May 2015 15:02:23 PDT
Turn a Signature into Book Art using Photoshop http://www.instructables.com/id/Turn-a-Signature-into-Book-Art-using-Photoshop/
Turn a Signature into Book Art using Photoshop - More DIY How To Projects]]> http://cdn.instructables.com/FXP/U2ED/IA1IUVT8/FXPU2EDIA1IUVT8.SQUARE2.jpg http://cdn.instructables.com/FXP/U2ED/IA1IUVT8/FXPU2EDIA1IUVT8.SQUARE.jpg http://cdn.instructables.com/FXP/U2ED/IA1IUVT8/FXPU2EDIA1IUVT8.SMALL.gif flyingpuppy Folding a signature out of the pages of a book is hard to do, but it is doable, and it's a great gift idea if you can master it!This tutorial will show you what to look for in an ideal signature, what to look for in an ideal book, how to process your design (in this case a signature) in Photoshop in...
By: flyingpuppy

Continue Reading »]]>
Sat, 23 May 2015 14:59:05 PDT
How to make 3D Origami Pieces - Step by step - Instructions http://www.instructables.com/id/How-to-make-3D-Origami-Pieces-Step-by-step-Instruc/
How to make 3D Origami Pieces - Step by step - Instructions - More DIY How To Projects]]> http://cdn.instructables.com/FUN/ZJ6S/IA1IUNP9/FUNZJ6SIA1IUNP9.SQUARE2.jpg http://cdn.instructables.com/FUN/ZJ6S/IA1IUNP9/FUNZJ6SIA1IUNP9.SQUARE.jpg http://cdn.instructables.com/FUN/ZJ6S/IA1IUNP9/FUNZJ6SIA1IUNP9.SMALL.jpg Giulia Art In this project you'll see how to make a 3D Origami Piece. Watch the video!!! How to make an Origami piece Take a piece of paper ( 6 cm x 9 cm ).In the next Steps I will show you how to fold it! First fold First fold Second fold Second fold Unfold only the last folding Unfold only th...
By: Giulia Art

Continue Reading »]]>
Sat, 23 May 2015 14:34:15 PDT
How to connect a Raspberry Pi to a Wi-Fi network http://www.instructables.com/id/How-to-connect-a-Raspberry-Pi-to-a-Wi-Fi-network/
How to connect a Raspberry Pi to a Wi-Fi network - More DIY How To Projects]]> http://cdn.instructables.com/F0J/70CX/IA0WKL68/F0J70CXIA0WKL68.SQUARE2.jpg http://cdn.instructables.com/F0J/70CX/IA0WKL68/F0J70CXIA0WKL68.SQUARE.jpg http://cdn.instructables.com/F0J/70CX/IA0WKL68/F0J70CXIA0WKL68.SMALL.jpg KieraM So you want to connect a Raspberry Pi to the internet, but your computer lacks an ethernet connection, or you lack an ethernet cable. What to do?What you need:Raspberry PimicroSD cardHDMI cableUSB power adapter (that can provide at least 600mA at 5V), include a micro USB cableUSB Wi-Fi adapterUSB ke...
By: KieraM

Continue Reading »]]>
Sat, 23 May 2015 14:09:29 PDT
101 useful, practical, functional 3d prints! http://www.instructables.com/id/101-useful-practical-functional-3d-prints/
101 useful, practical, functional 3d prints! - More DIY How To Projects]]> http://cdn.instructables.com/F44/T2CY/I9YBO55A/F44T2CYI9YBO55A.SQUARE2.jpg http://cdn.instructables.com/F44/T2CY/I9YBO55A/F44T2CYI9YBO55A.SQUARE.jpg http://cdn.instructables.com/F44/T2CY/I9YBO55A/F44T2CYI9YBO55A.SMALL.jpg JavaProgrammer This is a compilation of 101 useful things that can be 3D printed!If you like this instructable please vote for it in the "Mind for Design"(Theme:Digital Design) and/or the "3D printing"(Theme: Anything to do with 3D printing) contest(s). If you don't have an account, please take the time to make on...
By: JavaProgrammer

Continue Reading »]]>
Sat, 23 May 2015 13:21:54 PDT
RF shield out of duct tape http://www.instructables.com/id/RF-shield-out-of-duct-tape/
RF shield out of duct tape - More DIY How To Projects]]> http://cdn.instructables.com/F9G/LIME/I9YRUFDD/F9GLIMEI9YRUFDD.SQUARE2.jpg http://cdn.instructables.com/F9G/LIME/I9YRUFDD/F9GLIMEI9YRUFDD.SQUARE.jpg http://cdn.instructables.com/F9G/LIME/I9YRUFDD/F9GLIMEI9YRUFDD.SMALL.jpg Engineer_Allen Like most people, I'm not too thrilled about everyone and their brother spying on me, attempting to hack into my electronics, etc. I'm also smart enough to realize that I really can't stop the all the different governments and their organizations from doing this, but it really torques me off when Go...
By: Engineer_Allen

Continue Reading »]]>
Sat, 23 May 2015 13:12:14 PDT
Hindsight Camera Design http://www.instructables.com/id/Hindsight-Camera/
Hindsight Camera Design - More DIY How To Projects]]> http://cdn.instructables.com/FRW/X5RG/IA0WJN9W/FRWX5RGIA0WJN9W.SQUARE2.jpg http://cdn.instructables.com/FRW/X5RG/IA0WJN9W/FRWX5RGIA0WJN9W.SQUARE.jpg http://cdn.instructables.com/FRW/X5RG/IA0WJN9W/FRWX5RGIA0WJN9W.SMALL.jpg english tea It sucks when you miss that incredible moment because you weren't recording! Until now, the only way to catch that amazing moment was to be very lucky or to record everything, all the time. This need lots of SD cards and a video editing pixie to spend hours trawling through your footage to find that...
By: english tea

Continue Reading »]]>
Sat, 23 May 2015 13:09:43 PDT
Display live Arduino sensor readings on a Nokia 5110 LCD http://www.instructables.com/id/Arduinonokia-lcd-data-display-EASY-VERSION/
Display live Arduino sensor readings on a Nokia 5110 LCD - More DIY How To Projects]]> http://cdn.instructables.com/F62/D6II/IA0WLE4Q/F62D6IIIA0WLE4Q.SQUARE2.jpg http://cdn.instructables.com/F62/D6II/IA0WLE4Q/F62D6IIIA0WLE4Q.SQUARE.jpg http://cdn.instructables.com/F62/D6II/IA0WLE4Q/F62D6IIIA0WLE4Q.SMALL.jpg Crtek If you've ever worked with arduino, you've probably wanted it to display sensor readings.Using the serial monitor is perfectly fine, but being the arduino badass you are quickly becoming, you probably want it to display the readings on something more sciency looking.Also, having your arduino connect...
By: Crtek

Continue Reading »]]>
Sat, 23 May 2015 13:06:30 PDT
Homemade (drinkable) room spray http://www.instructables.com/id/Homemade-drinkable-room-spray/
Homemade (drinkable) room spray - More DIY How To Projects]]> http://cdn.instructables.com/FC9/4YBK/IA0WFOGA/FC94YBKIA0WFOGA.SQUARE2.jpg http://cdn.instructables.com/FC9/4YBK/IA0WFOGA/FC94YBKIA0WFOGA.SQUARE.jpg http://cdn.instructables.com/FC9/4YBK/IA0WFOGA/FC94YBKIA0WFOGA.SMALL.jpg chelseabun Homemade drinkable room spray isn't stay too far from your kitchen. I love tea. It has good smell, cheap, nature, and delicious. If you are tea lover, it also means you love its smell. Its smell is so sweet. When I'm making thirsty-wrap, I accidentally found tea can be used as room spray Things ...
By: chelseabun

Continue Reading »]]>
Sat, 23 May 2015 12:30:00 PDT
Save your phone with thirsty-wrap http://www.instructables.com/id/Save-your-phone-with-thirsty-wrap/
Save your phone with thirsty-wrap - More DIY How To Projects]]> http://cdn.instructables.com/F89/R68U/I9YBYG2A/F89R68UI9YBYG2A.SQUARE2.jpg http://cdn.instructables.com/F89/R68U/I9YBYG2A/F89R68UI9YBYG2A.SQUARE.jpg http://cdn.instructables.com/F89/R68U/I9YBYG2A/F89R68UI9YBYG2A.SMALL.jpg chelseabun Your phone dropped into water? Your phone might damaged, you will lose your important contacts, pictures, files or even your phone. It's a nightmare. I know it's a bad thing can happen to anyone, but have you ready for the worst? I guess not. So this time let's prepare for it. How to save your pho...
By: chelseabun

Continue Reading »]]>
Sat, 23 May 2015 12:29:56 PDT
PinBrick http://www.instructables.com/id/PinBrick/
PinBrick - More DIY How To Projects]]> http://cdn.instructables.com/FH4/XQQ3/IA0WFL1B/FH4XQQ3IA0WFL1B.SQUARE2.jpg http://cdn.instructables.com/FH4/XQQ3/IA0WFL1B/FH4XQQ3IA0WFL1B.SQUARE.jpg http://cdn.instructables.com/FH4/XQQ3/IA0WFL1B/FH4XQQ3IA0WFL1B.SMALL.jpg TiborR Hello everyone, can you imagine bricks without any limit for create incredible sculptures? I hope you can, and here is solution for that.And, idea is to make this project open-source, to print this bricks around the world. Modeling tutorial - SpaceClaim 2014 Here is short tutorial, how to model s...
By: TiborR

Continue Reading »]]>
Sat, 23 May 2015 12:27:02 PDT