Instructables: exploring - BE428C8A3A071029AC23001143E7E506 - wood http://www.instructables.com Mon, 30 May 2016 06:02:17 PDT BLOX v1.01 Reclaimed pallet wood table http://www.instructables.com/id/Reclaimed-Pallet-Wood-Table/
Reclaimed pallet wood table - More DIY How To Projects]]> http://cdn.instructables.com/FUC/R5HY/IOSP8U35/FUCR5HYIOSP8U35.SQUARE2.jpg http://cdn.instructables.com/FUC/R5HY/IOSP8U35/FUCR5HYIOSP8U35.SQUARE.jpg http://cdn.instructables.com/FUC/R5HY/IOSP8U35/FUCR5HYIOSP8U35.SMALL.jpg Dennis W I made this table to reuse wood that would have otherwise been thrown away. I also wanted to make a table that used old and damaged wood but that looked good because of the quality of the joints and the build. Also i wanted to build something that cost me as little as money as possible. This table ...
By: Dennis W

Continue Reading »]]>
Mon, 30 May 2016 05:44:28 PDT
Homemade Wood Metal Mini Lathe Press Drills DIY Headstock Chuck Spindle Tailstock CNC http://www.instructables.com/id/Homemade-Wood-Metal-Mini-Lathe-Press-Drills-DIY-He/
Homemade Wood Metal Mini Lathe Press Drills DIY Headstock Chuck Spindle Tailstock CNC - More DIY How To Projects]]> http://cdn.instructables.com/FAW/NCJ8/IOSP8DZK/FAWNCJ8IOSP8DZK.SQUARE2.jpg http://cdn.instructables.com/FAW/NCJ8/IOSP8DZK/FAWNCJ8IOSP8DZK.SQUARE.jpg http://cdn.instructables.com/FAW/NCJ8/IOSP8DZK/FAWNCJ8IOSP8DZK.SMALL.jpg joulethief669 Homemade Wood Metal Mini Lathe Press Drills DIY Headstock Chuck Spindle Tailstock CNCMaterials:1 pcs Aluminium 90 mm x 90 mm x 8 mm2 pcs Aluminium 45 mm x 80 mm x 12 mm 2 pcs rod shaft 12 mm x 400mm cnc linear rails CNC rod 7 pcs SK12 12 mm linear rail shaft SH8A for XYZ Table CNC machine1 pcs Alum...
By: joulethief669

Continue Reading »]]>
Mon, 30 May 2016 00:02:58 PDT
Reclaimed Wooden Shipping Crate into Rolling Seat with Storage http://www.instructables.com/id/Reclaimed-Wooden-Shipping-Crate-Into-Rolling-Seat-/
Reclaimed Wooden Shipping Crate into Rolling Seat with Storage - More DIY How To Projects]]> http://cdn.instructables.com/FB2/TCM5/IOSU8J74/FB2TCM5IOSU8J74.SQUARE2.jpg http://cdn.instructables.com/FB2/TCM5/IOSU8J74/FB2TCM5IOSU8J74.SQUARE.jpg http://cdn.instructables.com/FB2/TCM5/IOSU8J74/FB2TCM5IOSU8J74.SMALL.jpg ellason1 If you're like me and would rather not have to stand and put your shoes on at the same time. Lucky for you, I solved the problem. This cushioned roll away storage crate is perfect to go in the corner of your room or right next to the front door. You can hide your shoes away right in the crate and sl...
By: ellason1

Continue Reading »]]>
Sun, 29 May 2016 19:17:19 PDT
Easy Garden Rack From Pallets http://www.instructables.com/id/Easy-Garden-Rack-From-Pallets/
Easy Garden Rack From Pallets - More DIY How To Projects]]> http://cdn.instructables.com/FSX/A4LZ/IOQF9O8E/FSXA4LZIOQF9O8E.SQUARE2.jpg http://cdn.instructables.com/FSX/A4LZ/IOQF9O8E/FSXA4LZIOQF9O8E.SQUARE.jpg http://cdn.instructables.com/FSX/A4LZ/IOQF9O8E/FSXA4LZIOQF9O8E.SMALL.jpg QuentinD8 This idea came from two facts : There are always tools lying around in my garden because there no place dedicated to it.I had one big pallet (almost 5m long) and no use for it.As I already have a sink in my garden, I wanted to make a dimension matching rack next to it so I started by drawing a 3D mo...
By: QuentinD8

Continue Reading »]]>
Sun, 29 May 2016 08:34:35 PDT
How to Make a Podium http://www.instructables.com/id/How-to-Make-a-Podium/
How to Make a Podium - More DIY How To Projects]]> http://cdn.instructables.com/FN2/XHGE/IORPZPV6/FN2XHGEIORPZPV6.SQUARE2.jpg http://cdn.instructables.com/FN2/XHGE/IORPZPV6/FN2XHGEIORPZPV6.SQUARE.jpg http://cdn.instructables.com/FN2/XHGE/IORPZPV6/FN2XHGEIORPZPV6.SMALL.jpg FABLABJubail Hey guys, today we will be designing and making a custom podium using couple of 2D and 3D software. We will use a CNC machine and MDF wood to make and build our podium.This Projects was made by the team of FABLAB Jubail Requirements For this project we will need:MDF or plywood wood (12mm).Wood g...
By: FABLABJubail

Continue Reading »]]>
Sun, 29 May 2016 08:32:31 PDT
A Rustic Table http://www.instructables.com/id/A-Rustic-Table/
A Rustic Table - More DIY How To Projects]]> http://cdn.instructables.com/FIP/VW4Z/IORH5GG2/FIPVW4ZIORH5GG2.SQUARE2.jpg http://cdn.instructables.com/FIP/VW4Z/IORH5GG2/FIPVW4ZIORH5GG2.SQUARE.jpg http://cdn.instructables.com/FIP/VW4Z/IORH5GG2/FIPVW4ZIORH5GG2.SMALL.jpg hboom I made a rustic table from Pallet wood...It is a simple design and collapseble so easy to take with you on a road trip or just in the back jard. What do you need.... 1. Pallet wood or other reclamed wood.2. Hand saw or tablesaw3. Wood glue and clamps.4. Wood srews and a screwdriver or drill5. Som...
By: hboom

Continue Reading »]]>
Sun, 29 May 2016 07:54:33 PDT
Homemade Rotary Press Drill Tools Drills DIY Wood Horizontal Vertical Drilling http://www.instructables.com/id/Homemade-Rotary-Press-Drill-Tools-Drills-DIY-Wood--1/
Homemade Rotary Press Drill Tools Drills DIY Wood Horizontal Vertical Drilling - More DIY How To Projects]]> http://cdn.instructables.com/FRW/T5MX/IORH4U57/FRWT5MXIORH4U57.SQUARE2.jpg http://cdn.instructables.com/FRW/T5MX/IORH4U57/FRWT5MXIORH4U57.SQUARE.jpg http://cdn.instructables.com/FRW/T5MX/IORH4U57/FRWT5MXIORH4U57.SMALL.jpg joulethief669 Homemade Rotary Press Drill Frame Stage here:Homemade Rotary Press Drill Tools Drills DIY Wood Horizontal Vertical Drilling1 hand drill tools1 pcs Aluminium 100 mm x 80 mm x 20 mm make hole 42 mm for hand drill toolsMaterials for Z Axis slide 100 mm travel 2 pcs Aluminium 42 mm x 82 mm x 10 mm 2 pc...
By: joulethief669

Continue Reading »]]>
Sun, 29 May 2016 02:20:26 PDT
DIY X Y Z Axis Slide Homemade Wood Mill CNC Metal Milling Router http://www.instructables.com/id/DIY-X-Y-Z-Axis-Slide-Homemade-Wood-Mill-CNC-Metal-/
DIY X Y Z Axis Slide Homemade Wood Mill CNC Metal Milling Router - More DIY How To Projects]]> http://cdn.instructables.com/FR5/R0CI/IORH4U1Q/FR5R0CIIORH4U1Q.SQUARE2.jpg http://cdn.instructables.com/FR5/R0CI/IORH4U1Q/FR5R0CIIORH4U1Q.SQUARE.jpg http://cdn.instructables.com/FR5/R0CI/IORH4U1Q/FR5R0CIIORH4U1Q.SMALL.jpg joulethief669 DIY X Y Z Axis Slide Homemade Wood Mill CNC Metal Milling RouterMaterials for 80 mm travel1 pcsFL08 2 Bolt 8mm Bore Self-aligning Flange Ball Bearing1 pcs Aluminium 200 mm x 90 mm x 12 mm2 pcs Aluminium 90 mm x 40 mm x 12 mm 1 pcs Aluminium 90 mm x 80 mm x 35 mm make 2 hole 28 mm 1pcs 150 mm Lead Sc...
By: joulethief669

Continue Reading »]]>
Sun, 29 May 2016 01:54:04 PDT
Stars and Stripes Patriotic Wood Slice! http://www.instructables.com/id/Stars-and-Stripes-Patriotic-Wood-Slice/
Stars and Stripes Patriotic Wood Slice! - More DIY How To Projects]]> http://cdn.instructables.com/FWZ/UQ37/IORH0WZ2/FWZUQ37IORH0WZ2.SQUARE2.jpg http://cdn.instructables.com/FWZ/UQ37/IORH0WZ2/FWZUQ37IORH0WZ2.SQUARE.jpg http://cdn.instructables.com/FWZ/UQ37/IORH0WZ2/FWZUQ37IORH0WZ2.SMALL.jpg doodlecraft Stars and Stripes Patriotic Wood Slice!We had a huge windstorm in May and ended up with lots of logs!I decided to put all those free materials to good use!I love using reclaimed supplies for fun projects!This technique is great for other things like rocks, pallets or old barn wood. Baking and Supp...
By: doodlecraft

Continue Reading »]]>
Sat, 28 May 2016 18:48:05 PDT
The Claw Bowl http://www.instructables.com/id/The-Claw-Bowl/
The Claw Bowl - More DIY How To Projects]]> http://cdn.instructables.com/FLK/QR14/IORET7LI/FLKQR14IORET7LI.SQUARE2.jpg http://cdn.instructables.com/FLK/QR14/IORET7LI/FLKQR14IORET7LI.SQUARE.jpg http://cdn.instructables.com/FLK/QR14/IORET7LI/FLKQR14IORET7LI.SMALL.jpg yuvallahav I call this bowl "The Clow Bowl" for its general shape, but you could call it a star bowl, since we will be making it out of a star formed wood blank. Looking at this bowl from above will make it look like a perfect five point star, or a pentagram. Preparing your blank So you've decided to make a...
By: yuvallahav

Continue Reading »]]>
Sat, 28 May 2016 14:51:10 PDT
Turning an Ironwood Pen on a Lathe http://www.instructables.com/id/Turning-an-Ironwood-Pen-on-a-Lathe/
Turning an Ironwood Pen on a Lathe - More DIY How To Projects]]> http://cdn.instructables.com/F6H/79IF/IORGXALB/F6H79IFIORGXALB.SQUARE2.jpg http://cdn.instructables.com/F6H/79IF/IORGXALB/F6H79IFIORGXALB.SQUARE.jpg http://cdn.instructables.com/F6H/79IF/IORGXALB/F6H79IFIORGXALB.SMALL.jpg tyberinger So, why would I want to make my own hardwood pen? I'm glad you asked. There's not much interesting about a a skinny ink pen that cost (almost) literally a dime a dozen. Because wood is a natural, organic material, each pen make from wood is truly unique. Another reason is because lathe work is v...
By: tyberinger

Continue Reading »]]>
Sat, 28 May 2016 13:52:49 PDT
Pallet block phone/tablet holder http://www.instructables.com/id/Pallet-Block-Phonetablet-Holder/
Pallet block phone/tablet holder - More DIY How To Projects]]> http://cdn.instructables.com/F6V/CTQC/IORGXI38/F6VCTQCIORGXI38.SQUARE2.jpg http://cdn.instructables.com/F6V/CTQC/IORGXI38/F6VCTQCIORGXI38.SQUARE.jpg http://cdn.instructables.com/F6V/CTQC/IORGXI38/F6VCTQCIORGXI38.SMALL.jpg Howterson I had a lot of pallet blocks left from all of the pallet projects i made in the last week. So i decided to take a few and make phone and tablet holders. This project takes about an hour. And it isn't that difficult. The tools you need are: a woodsaw, all kinds of files, a flathead screwdriver and a ...
By: Howterson

Continue Reading »]]>
Sat, 28 May 2016 13:08:57 PDT
ADL (Awesome Desktop Lamp) http://www.instructables.com/id/ADL-Awesome-Desktop-Lamp/
ADL (Awesome Desktop Lamp) - More DIY How To Projects]]> http://cdn.instructables.com/FNX/VM6J/IOO5GC8T/FNXVM6JIOO5GC8T.SQUARE2.jpg http://cdn.instructables.com/FNX/VM6J/IOO5GC8T/FNXVM6JIOO5GC8T.SQUARE.jpg http://cdn.instructables.com/FNX/VM6J/IOO5GC8T/FNXVM6JIOO5GC8T.SMALL.jpg TheRabbitHole Hi there every one. I've been a great fan of the instructables website for a while now and got a lot of inspiration for several of my projects from this Instructo-world in the past and I thought it’s about time to show you one of my projects.I used Duck210's http://www.instructables.com/id/New-Arc-...
By: TheRabbitHole

Continue Reading »]]>
Sat, 28 May 2016 08:11:43 PDT
Homemade Rotary Press Drill Tools Drills DIY Wood Horizontal Vertical Drilling Collet ER11 Spindle http://www.instructables.com/id/Homemade-Rotary-Press-Drill-Tools-Drills-DIY-Wood-/
Homemade Rotary Press Drill Tools Drills DIY Wood Horizontal Vertical Drilling Collet ER11 Spindle - More DIY How To Projects]]> http://cdn.instructables.com/FZ3/4208/IOQ1ONOV/FZ34208IOQ1ONOV.SQUARE2.jpg http://cdn.instructables.com/FZ3/4208/IOQ1ONOV/FZ34208IOQ1ONOV.SQUARE.jpg http://cdn.instructables.com/FZ3/4208/IOQ1ONOV/FZ34208IOQ1ONOV.SMALL.jpg joulethief669 Homemade Rotary Press Drill Tools Drills DIY Wood Horizontal Vertical Drilling Collet ER11 SpindleHomemade Tools Frame here:1 pcs motor 50 watt take from old hand drill1 pcs Special round steel pipes 35 mm x 32 mm x 60 mm male1 pcs Special round steel pipes 35 mm x 32 mm x 60 mm femaleMaterials for...
By: joulethief669

Continue Reading »]]>
Sat, 28 May 2016 03:51:08 PDT
Grass Clipping Cart From Reclaimed Materials. http://www.instructables.com/id/Grass-Clipping-Cart-From-Reclaimed-Materials/
Grass Clipping Cart From Reclaimed Materials. - More DIY How To Projects]]> http://cdn.instructables.com/FAR/YO40/ION6MRG8/FARYO40ION6MRG8.SQUARE2.jpg http://cdn.instructables.com/FAR/YO40/ION6MRG8/FARYO40ION6MRG8.SQUARE.jpg http://cdn.instructables.com/FAR/YO40/ION6MRG8/FARYO40ION6MRG8.SMALL.jpg tjdux This is a cart I made to collect grass clippings and pulled weeds from the two yards I maintain. This cart is designed to pull behind a riding lawn mower or fourwheeler or possibly a pick up (note this trailer is not road legal. Most cops don't worry too much about a fourwheeler or riding mower but ...
By: tjdux

Continue Reading »]]>
Fri, 27 May 2016 18:25:33 PDT
Big Day Cutting Board http://www.instructables.com/id/Big-Day-Cutting-Board/
Big Day Cutting Board - More DIY How To Projects]]> http://cdn.instructables.com/FP0/4TIP/IOPZDI8S/FP04TIPIOPZDI8S.SQUARE2.jpg http://cdn.instructables.com/FP0/4TIP/IOPZDI8S/FP04TIPIOPZDI8S.SQUARE.jpg http://cdn.instructables.com/FP0/4TIP/IOPZDI8S/FP04TIPIOPZDI8S.SMALL.jpg unusual architect We all want to make sure that the Wedding Day is a special day for our friends and loved ones, but how can we continue the love even after the Bid Day?! A Big Day Cutting Board! This cutting board has the Initial of the newly-weds, their name, and the date AND its SUPER EASY to create especially if ...
By: unusual architect

Continue Reading »]]>
Fri, 27 May 2016 16:10:15 PDT
Spice & Hot Sauce Rack From A Pallet http://www.instructables.com/id/Spice-Hot-Sauce-Rack-From-a-Pallet/
Spice & Hot Sauce Rack From A Pallet - More DIY How To Projects]]> http://cdn.instructables.com/F64/EKVH/IOOXLA6N/F64EKVHIOOXLA6N.SQUARE2.jpg http://cdn.instructables.com/F64/EKVH/IOOXLA6N/F64EKVHIOOXLA6N.SQUARE.jpg http://cdn.instructables.com/F64/EKVH/IOOXLA6N/F64EKVHIOOXLA6N.SMALL.jpg chadmikell My hot sauce collection was getting to large for our current spice rack, so something had to be done.I was thinking about doing something rustic with both wood and metal .I also had a pallet I had been saving that had achieved a perfect patina for the look I was going for. So I went to work.You can ...
By: chadmikell

Continue Reading »]]>
Fri, 27 May 2016 09:05:19 PDT
Large, Homemade High Quality Nightstand http://www.instructables.com/id/Large-Homemade-High-Quality-Nightstand/
Large, Homemade High Quality Nightstand - More DIY How To Projects]]> http://cdn.instructables.com/F5F/LK72/IOOM5ETZ/F5FLK72IOOM5ETZ.SQUARE2.jpg http://cdn.instructables.com/F5F/LK72/IOOM5ETZ/F5FLK72IOOM5ETZ.SQUARE.jpg http://cdn.instructables.com/F5F/LK72/IOOM5ETZ/F5FLK72IOOM5ETZ.SMALL.jpg TheBroSquad This project will make a large, finished nightstand or table with a drawer. The nightstand is about two and a half feet tall (the legs can be shortened or lengthened to your preference), and about two feet wide. It has a working drawer and a light finish.This is a great, fun project. It is relativel...
By: TheBroSquad

Continue Reading »]]>
Fri, 27 May 2016 08:51:41 PDT
Custom Reclaimed Wood Sign http://www.instructables.com/id/Custom-Reclaimed-Wood-Sign/
Custom Reclaimed Wood Sign - More DIY How To Projects]]> http://cdn.instructables.com/FMJ/TEG5/IOOM50OX/FMJTEG5IOOM50OX.SQUARE2.jpg http://cdn.instructables.com/FMJ/TEG5/IOOM50OX/FMJTEG5IOOM50OX.SQUARE.jpg http://cdn.instructables.com/FMJ/TEG5/IOOM50OX/FMJTEG5IOOM50OX.SMALL.jpg John_Malecki In this video i make a reclaimed wood sign for a local business, This build is very easy and simple and can be done in less than a day with the right tools. Using custom signage to make your branding pop is a hugely valuable tool. Check it out! Pick and prep your wood In this step you want to fi...
By: John_Malecki

Continue Reading »]]>
Fri, 27 May 2016 07:47:26 PDT
Homemade Mini Wood PCB Milling Router Mill Frame DIY Collet ER11 X Y Z Stage Axis Slide CNC Aluminium Alloy http://www.instructables.com/id/Homemade-Mini-Wood-PCB-Milling-Router-Mill-Frame-D/
Homemade Mini Wood PCB Milling Router Mill Frame DIY Collet ER11 X Y Z Stage Axis Slide CNC Aluminium Alloy - More DIY How To Projects]]> http://cdn.instructables.com/FP6/TUA3/IOOXKI5A/FP6TUA3IOOXKI5A.SQUARE2.jpg http://cdn.instructables.com/FP6/TUA3/IOOXKI5A/FP6TUA3IOOXKI5A.SQUARE.jpg http://cdn.instructables.com/FP6/TUA3/IOOXKI5A/FP6TUA3IOOXKI5A.SMALL.jpg joulethief669 Homemade Mini Wood PCB Milling Router Mill Frame DIY Collet ER11 X Y Z Stage Axis Slide CNC Homemade X Axis Slide here:Homemade Y Axis Slide here:Homemade Z Axis Slide and Collet ER 11Materials for Z Axis DIY 100 mm travelCollet ER11 Spinde DIY 1 pcs Aluminium 200 mm x 82 mm x 10 mm 2 pcs Aluminium ...
By: joulethief669

Continue Reading »]]>
Fri, 27 May 2016 01:48:22 PDT
Homemade Mini Wood PCB Milling Router Mill DIY Collet ER11 X Y Z Stage Frame Axis Slide CNC Aluminium Alloy http://www.instructables.com/id/Homemade-Mini-Wood-PCB-Milling-Router-Mill-DIY-Col/
Homemade Mini Wood PCB Milling Router Mill DIY Collet ER11 X Y Z Stage Frame Axis Slide CNC Aluminium Alloy - More DIY How To Projects]]> http://cdn.instructables.com/FJI/XVPT/IOOK19XD/FJIXVPTIOOK19XD.SQUARE2.jpg http://cdn.instructables.com/FJI/XVPT/IOOK19XD/FJIXVPTIOOK19XD.SQUARE.jpg http://cdn.instructables.com/FJI/XVPT/IOOK19XD/FJIXVPTIOOK19XD.SMALL.jpg joulethief669 Homemade Mini Wood PCB Milling Router Mill DIY X Y Z Stage Frame Axis Slide CNC Aluminium AlloyHomemade Chuck Spindle Collet ER11 here:Homemade X Y Axis Slide Milling Router Mill here:Materials:Z Axis travel 90 mm 1 pcs SFU1010 Ball Screw Nut 1005 for RM1010 200 mm travel 90mm1 pcs aluminium alloy...
By: joulethief669

Continue Reading »]]>
Fri, 27 May 2016 01:02:09 PDT
Pipe & Pallet Shelf http://www.instructables.com/id/Pipe-Pallet-Shelf/
Pipe & Pallet Shelf - More DIY How To Projects]]> http://cdn.instructables.com/FPF/U3NA/IOOXK50A/FPFU3NAIOOXK50A.SQUARE2.jpg http://cdn.instructables.com/FPF/U3NA/IOOXK50A/FPFU3NAIOOXK50A.SQUARE.jpg http://cdn.instructables.com/FPF/U3NA/IOOXK50A/FPFU3NAIOOXK50A.SMALL.jpg MotherDaughterProjects Steph has been looking for some shelves in her office to hold supplies. We haven't used pipe or pallet wood before in a project so we thought shelves would be a great way to try both materials and get some cool shelves! Watch the video Gather Materials Pallet (they come in different shapes an...
By: MotherDaughterProjects

Continue Reading »]]>
Thu, 26 May 2016 19:39:16 PDT
SHOOTING STAR MOBILE http://www.instructables.com/id/SHOOTING-STAR-MOBILE/
SHOOTING STAR MOBILE - More DIY How To Projects]]> http://cdn.instructables.com/FQR/H8NR/IOO58E43/FQRH8NRIOO58E43.SQUARE2.jpg http://cdn.instructables.com/FQR/H8NR/IOO58E43/FQRH8NRIOO58E43.SQUARE.jpg http://cdn.instructables.com/FQR/H8NR/IOO58E43/FQRH8NRIOO58E43.SMALL.jpg elainesetareh This project features an artistic take on the classic shooting star. Follow these simple steps to create your own shooting star mobile with a genuine wooden frame, and your personal touches! Frame Set Up -Cut 3 bamboo sticks to create a triangle-Hammer out 6 paper clips, ensuring they are as flat...
By: elainesetareh

Continue Reading »]]>
Thu, 26 May 2016 15:23:16 PDT
How to Use Scrap Wood to Make Cool Table Top or Doll Table http://www.instructables.com/id/How-to-Use-Scrap-Wood-to-Make-Cool-Table-Top-or-Do/
How to Use Scrap Wood to Make Cool Table Top or Doll Table - More DIY How To Projects]]> http://cdn.instructables.com/F17/DB23/IOOJY7X3/F17DB23IOOJY7X3.SQUARE2.jpg http://cdn.instructables.com/F17/DB23/IOOJY7X3/F17DB23IOOJY7X3.SQUARE.jpg http://cdn.instructables.com/F17/DB23/IOOJY7X3/F17DB23IOOJY7X3.SMALL.jpg Cayd13 I had some scrap cedar decking so I made a table top for my mom and doll table for my younger sister. I did not not stain and paint the tables. My mom and sister did. Find Wood We have a huge burn pile in our yard. That is where I got my wood from Start Drawing The Table I put a nail in ...
By: Cayd13

Continue Reading »]]>
Thu, 26 May 2016 12:58:22 PDT
CRATES FOR SOUTH PACIFIC http://www.instructables.com/id/CRATES-FOR-SOUTH-PACIFIC/
CRATES FOR SOUTH PACIFIC - More DIY How To Projects]]> http://cdn.instructables.com/F3N/HW0X/IOOD5NGU/F3NHW0XIOOD5NGU.SQUARE2.jpg http://cdn.instructables.com/F3N/HW0X/IOOD5NGU/F3NHW0XIOOD5NGU.SQUARE.jpg http://cdn.instructables.com/F3N/HW0X/IOOD5NGU/F3NHW0XIOOD5NGU.SMALL.jpg DominicC35 South Pacific Wood Take one long piece of 2x4 wood(Not Pictured). Measure them to 4 7' 1/8th inch pieces. your going to take that one long piece with the measurements to the Compound Mitre Saw with Abrasive Blade and that is what you use to cut the pieces needed. glasses on at all times. Top pi...
By: DominicC35

Continue Reading »]]>
Thu, 26 May 2016 11:07:32 PDT
south pacific laundry cart http://www.instructables.com/id/South-Pacific-Laundry-Cart/
south pacific laundry cart - More DIY How To Projects]]> http://cdn.instructables.com/FWD/ITQK/IOOJX57D/FWDITQKIOOJX57D.SQUARE2.jpg http://cdn.instructables.com/FWD/ITQK/IOOJX57D/FWDITQKIOOJX57D.SQUARE.jpg http://cdn.instructables.com/FWD/ITQK/IOOJX57D/FWDITQKIOOJX57D.SMALL.jpg Meme27 How to make a laundry cart prop The first step to making a south pacific laundry cart is to measure out 4 pieces of 2 by 4 that are 4 feet long, four more pieces that should be 3 feet tall, and four more pieces that 2 feet wide. The second step would be to attach the already measured and cut...
By: Meme27

Continue Reading »]]>
Thu, 26 May 2016 10:51:08 PDT
Retro Inspired Phone Dock http://www.instructables.com/id/Retro-Inspired-Phone-Dock/
Retro Inspired Phone Dock - More DIY How To Projects]]> http://cdn.instructables.com/FZH/62RC/IOOD5IT8/FZH62RCIOOD5IT8.SQUARE2.jpg http://cdn.instructables.com/FZH/62RC/IOOD5IT8/FZH62RCIOOD5IT8.SQUARE.jpg http://cdn.instructables.com/FZH/62RC/IOOD5IT8/FZH62RCIOOD5IT8.SMALL.jpg luca8theworld Hello all, and welcome to my first instructable. I have been singing the praises of this site to anyone who ever had a question about anything remotely DIY for a long time, so I though it was time to contribute.I built one of these a little while ago. I had found an alarm clock app for my phone but ...
By: luca8theworld

Continue Reading »]]>
Thu, 26 May 2016 10:07:04 PDT
Homemade Wood Metal Mini Lathe Projects DIY Collet ER11 Headstock Chuck Spindle http://www.instructables.com/id/Homemade-Wood-Metal-Mini-Lathe-Projects-DIY-Collet/
Homemade Wood Metal Mini Lathe Projects DIY Collet ER11 Headstock Chuck Spindle - More DIY How To Projects]]> http://cdn.instructables.com/FRN/PQXX/IOLUBSQX/FRNPQXXIOLUBSQX.SQUARE2.jpg http://cdn.instructables.com/FRN/PQXX/IOLUBSQX/FRNPQXXIOLUBSQX.SQUARE.jpg http://cdn.instructables.com/FRN/PQXX/IOLUBSQX/FRNPQXXIOLUBSQX.SMALL.jpg joulethief669 Homemade Wood Metal Mini Lathe Projects DIY Collet ER11 Headstock Chuck SpindleMaterials:1 pcs motor 50 watt take from old hand drill 1 pcs aluminium alloy 42 mm x 80 mm x 12 mm 2 pcs Aluminium 80 mm x 80 mm x 12 mm1 pcs ER11 Motor Shaft Extension Rod Inner Hole 8 mm Optional Engraving Machine Cla...
By: joulethief669

Continue Reading »]]>
Thu, 26 May 2016 06:09:59 PDT
World Map Tabletop http://www.instructables.com/id/World-Map-Tabletop/
World Map Tabletop - More DIY How To Projects]]> http://cdn.instructables.com/FGG/3JE3/IOMP20EI/FGG3JE3IOMP20EI.SQUARE2.jpg http://cdn.instructables.com/FGG/3JE3/IOMP20EI/FGG3JE3IOMP20EI.SQUARE.jpg http://cdn.instructables.com/FGG/3JE3/IOMP20EI/FGG3JE3IOMP20EI.SMALL.jpg rdepoortere A woodcarving project I started as a gift for my brother. He's a big gaming fan and one of his favorite games is Risk, so I decided to 'make' him a Risk inspired (world map) table. After a good 2 months of drilling, dremeling and sanding, this was the result.Materials:- Table (I found mine in a seco...
By: rdepoortere

Continue Reading »]]>
Wed, 25 May 2016 17:45:03 PDT
Glockenspiel Steel and Wood http://www.instructables.com/id/Glockenspiel-Steel-and-Wood/
Glockenspiel Steel and Wood - More DIY How To Projects]]> http://cdn.instructables.com/FLD/6AMI/IOLR8FT6/FLD6AMIIOLR8FT6.SQUARE2.jpg http://cdn.instructables.com/FLD/6AMI/IOLR8FT6/FLD6AMIIOLR8FT6.SQUARE.jpg http://cdn.instructables.com/FLD/6AMI/IOLR8FT6/FLD6AMIIOLR8FT6.SMALL.jpg ashcof73 Glockenspiel Musical Instrument I built a Glockenspiel and it's main purpose is to use two metal bars and use the vibration and the bounce of the hit to make music. Get the required Materials. -4 small pieces of spike wood -6 steel bars - 12 aluminum studs - 1 aluminum bar - 4 screws - Screw Drive...
By: ashcof73

Continue Reading »]]>
Wed, 25 May 2016 07:18:00 PDT
South Pacific Crate http://www.instructables.com/id/South-Pacific-Crate/
South Pacific Crate - More DIY How To Projects]]> http://cdn.instructables.com/FMN/3VXL/IOOM2BHB/FMN3VXLIOOM2BHB.SQUARE2.jpg http://cdn.instructables.com/FMN/3VXL/IOOM2BHB/FMN3VXLIOOM2BHB.SQUARE.jpg http://cdn.instructables.com/FMN/3VXL/IOOM2BHB/FMN3VXLIOOM2BHB.SMALL.jpg king_zune Today Im going to teach you how to build an ammo crate for a play!!! STARTING OFF To start off you will need a long piece of wood (2x4). Cut the wood into 4 pieces 7 1/8th inches using a Compound Mitre Saw with an Abrasive blade. Make sure you use saftey glasses during all steps. TOP PIECES O...
By: king_zune

Continue Reading »]]>
Tue, 24 May 2016 13:56:44 PDT
Rustic Coat Rack using Shou-sugi-ban http://www.instructables.com/id/Rustic-Coat-Rack/
Rustic Coat Rack using Shou-sugi-ban - More DIY How To Projects]]> http://cdn.instructables.com/FBE/CBSL/IOLR6YJV/FBECBSLIOLR6YJV.SQUARE2.jpg http://cdn.instructables.com/FBE/CBSL/IOLR6YJV/FBECBSLIOLR6YJV.SQUARE.jpg http://cdn.instructables.com/FBE/CBSL/IOLR6YJV/FBECBSLIOLR6YJV.SMALL.jpg akullerkann Every corridor need a coat rack.For us, a random IKEA one did not fill the bill, so I decided to build my own custom designed reclaimed lumber coat rack.This project had been circling my head for a long time. The trigger was the Reclaimed lumber contest on the Instructables.I decided to use reclaime...
By: akullerkann

Continue Reading »]]>
Tue, 24 May 2016 13:56:04 PDT
Monogrammed Cheeseboard! http://www.instructables.com/id/Monogrammed-Cheeseboard/
Monogrammed Cheeseboard! - More DIY How To Projects]]> http://cdn.instructables.com/FPX/K3DC/IOK9P19G/FPXK3DCIOK9P19G.SQUARE2.jpg http://cdn.instructables.com/FPX/K3DC/IOK9P19G/FPXK3DCIOK9P19G.SQUARE.jpg http://cdn.instructables.com/FPX/K3DC/IOK9P19G/FPXK3DCIOK9P19G.SMALL.jpg ash_doge For a long time I have wanted to work more with inlays. An inlay is a decorative process in which you insert a material of contrasting color into another material to create a design. Chances are you see this decoration all around you in guitar necks, chessboards, artwork, and maybe even the floor o...
By: ash_doge

Continue Reading »]]>
Tue, 24 May 2016 10:52:13 PDT
Build Your Own Instrument (Guitar With a Violin Shape in My Case) ! http://www.instructables.com/id/Build-Your-Own-Instrument-Guitar-With-a-Violin-Sha/
Build Your Own Instrument (Guitar With a Violin Shape in My Case) ! - More DIY How To Projects]]> http://cdn.instructables.com/F4S/S4FD/IOKNA4QA/F4SS4FDIOKNA4QA.SQUARE2.jpg http://cdn.instructables.com/F4S/S4FD/IOKNA4QA/F4SS4FDIOKNA4QA.SQUARE.jpg http://cdn.instructables.com/F4S/S4FD/IOKNA4QA/F4SS4FDIOKNA4QA.SMALL.jpg DivadD1 Hi every one !I always wanted to create my own instrument. My grand father use to play violin, but know only how to play guitare. As i realy love the sound and the shape of a violin i decide do start building a unique instrument : a Guitalon, a Viloard ... call it as you want !During this project i ...
By: DivadD1

Continue Reading »]]>
Tue, 24 May 2016 09:37:12 PDT
Repurpose a Log Into a Geocache Container and How to Hide One http://www.instructables.com/id/Repurpose-a-Log-Into-a-Geocache-Container-and-How-/
Repurpose a Log Into a Geocache Container and How to Hide One - More DIY How To Projects]]> http://cdn.instructables.com/FT6/807H/IOKNA5QR/FT6807HIOKNA5QR.SQUARE2.jpg http://cdn.instructables.com/FT6/807H/IOKNA5QR/FT6807HIOKNA5QR.SQUARE.jpg http://cdn.instructables.com/FT6/807H/IOKNA5QR/FT6807HIOKNA5QR.SMALL.jpg Tracy4dj8 Cut the top off with a saw at the desired length. Drill The Hole Drill a hole in the bottom piece big enough to fit the container you will use in it. I used large drill bits and put several holes in a circle pattern. Drill A Hole In The Top Piece Drill a hole in the top piece big enough to fi...
By: Tracy4dj8

Continue Reading »]]>
Tue, 24 May 2016 09:31:57 PDT
The Hand Saw Box! | Band Saw Box Without a Bandsaw! http://www.instructables.com/id/The-Hand-Saw-Box-Band-Saw-Box-Without-a-Bandsaw/
The Hand Saw Box! | Band Saw Box Without a Bandsaw! - More DIY How To Projects]]> http://cdn.instructables.com/F0Y/L2MT/IOKN9HKB/F0YL2MTIOKN9HKB.SQUARE2.jpg http://cdn.instructables.com/F0Y/L2MT/IOKN9HKB/F0YL2MTIOKN9HKB.SQUARE.jpg http://cdn.instructables.com/F0Y/L2MT/IOKN9HKB/F0YL2MTIOKN9HKB.SMALL.jpg ShaunM11 So, I don’t have a bandsaw, but I really wanted to make a bandsaw box. I have a coping saw, so I decided to try and make one using that! Enjoy!There's a fantastic instructable on making bandsaw boxes already (http://www.instructables.com/id/Bandsaw-Box-Basics/ ) so this instructable is just about my...
By: ShaunM11

Continue Reading »]]>
Tue, 24 May 2016 02:46:24 PDT
How to Make a Box http://www.instructables.com/id/How-to-Make-a-Box/
How to Make a Box - More DIY How To Projects]]> http://cdn.instructables.com/FY4/AXBK/IOKBVBWR/FY4AXBKIOKBVBWR.SQUARE2.jpg http://cdn.instructables.com/FY4/AXBK/IOKBVBWR/FY4AXBKIOKBVBWR.SQUARE.jpg http://cdn.instructables.com/FY4/AXBK/IOKBVBWR/FY4AXBKIOKBVBWR.SMALL.jpg Wood Review Words and photos: Leo SadlekThe challenge to design a piece from a single board of timber is, at first glance, quite different from the usual design brief. It is rare for a client to give me a piece of timber with a request involving nothing more than can I please make something from it. Usually ...
By: Wood Review

Continue Reading »]]>
Mon, 23 May 2016 23:27:31 PDT
How to Handcut Dovetails http://www.instructables.com/id/How-to-Handcut-Dovetails/
How to Handcut Dovetails - More DIY How To Projects]]> http://cdn.instructables.com/FDU/IQNA/IOKBTWQ4/FDUIQNAIOKBTWQ4.SQUARE2.jpg http://cdn.instructables.com/FDU/IQNA/IOKBTWQ4/FDUIQNAIOKBTWQ4.SQUARE.jpg http://cdn.instructables.com/FDU/IQNA/IOKBTWQ4/FDUIQNAIOKBTWQ4.SMALL.jpg Wood Review Recently we uploaded Peter Young's demonstration of his 5-minute dovetail. This was intended to be an exercise for improving handsawing skills. In this video Peter shows you the 'real' process for handcutting dovetails from start to finish.Like many things where woodworking is concerned there are ...
By: Wood Review

Continue Reading »]]>
Mon, 23 May 2016 18:57:36 PDT
Desk Catapult http://www.instructables.com/id/Desk-Catapult/
Desk Catapult - More DIY How To Projects]]> http://cdn.instructables.com/FWN/YCKI/IOIQSCLZ/FWNYCKIIOIQSCLZ.SQUARE2.jpg http://cdn.instructables.com/FWN/YCKI/IOIQSCLZ/FWNYCKIIOIQSCLZ.SQUARE.jpg http://cdn.instructables.com/FWN/YCKI/IOIQSCLZ/FWNYCKIIOIQSCLZ.SMALL.jpg RaguiE If you have access to a laser cutter and want to shoot stuff with a catapult at your co-workers, you will definitely enjoy this project.This little guy is originally known as “The Backyard Ogre”. I would be lying if I said the design was 100% mine because I’ve seen a picture of the catapult on a web...
By: RaguiE

Continue Reading »]]>
Mon, 23 May 2016 14:46:59 PDT
Ferric Chloride Agitator for Circuit Board Etching http://www.instructables.com/id/Ferric-Chloride-Agitator-for-Circuit-Board-Etching/
Ferric Chloride Agitator for Circuit Board Etching - More DIY How To Projects]]> http://cdn.instructables.com/F6D/INRP/IOIQSCA2/F6DINRPIOIQSCA2.SQUARE2.jpg http://cdn.instructables.com/F6D/INRP/IOIQSCA2/F6DINRPIOIQSCA2.SQUARE.jpg http://cdn.instructables.com/F6D/INRP/IOIQSCA2/F6DINRPIOIQSCA2.SMALL.jpg tanner_tech When manufacturing circuit boards, the most popular method of removing the copper around the traces is ferric chloride etching. This process is slow, but can be sped up by agitating and heating the solution during the etching process. This instructable will show you how to build a contraption that...
By: tanner_tech

Continue Reading »]]>
Mon, 23 May 2016 14:38:12 PDT
Rough Wood Outdoor Bench http://www.instructables.com/id/Rough-Wood-Outdoor-Bench/
Rough Wood Outdoor Bench - More DIY How To Projects]]> http://cdn.instructables.com/FRJ/89S7/IOK3MIHN/FRJ89S7IOK3MIHN.SQUARE2.jpg http://cdn.instructables.com/FRJ/89S7/IOK3MIHN/FRJ89S7IOK3MIHN.SQUARE.jpg http://cdn.instructables.com/FRJ/89S7/IOK3MIHN/FRJ89S7IOK3MIHN.SMALL.jpg littlewaffles This Bench is perfect for an outdoor setting. The bench is a little on the heavy side because of the uncut lumber but overall it is nice because it is sturdy and can take a beating if the right materials are used. The bench only took 5 hours to make and can take much less time if you have help from ...
By: littlewaffles

Continue Reading »]]>
Mon, 23 May 2016 11:39:25 PDT
How to Make a Wood Clock http://www.instructables.com/id/How-to-Make-a-Wood-Clock/
How to Make a Wood Clock - More DIY How To Projects]]> http://cdn.instructables.com/FFV/4H0H/IOH8Q4ZV/FFV4H0HIOH8Q4ZV.SQUARE2.jpg http://cdn.instructables.com/FFV/4H0H/IOH8Q4ZV/FFV4H0HIOH8Q4ZV.SQUARE.jpg http://cdn.instructables.com/FFV/4H0H/IOH8Q4ZV/FFV4H0HIOH8Q4ZV.SMALL.jpg bmuether2 This instructable will show you how to make a nice wood clock to hang on the wall. These steps will help you make one too. Let's Get Started! Materials Used Materials: 1. Double A Battery2. Clock Kit from Joann Fabrics (comes with numbers, movement motor, and clock hands)3. A Piece of Wood from ...
By: bmuether2

Continue Reading »]]>
Sun, 22 May 2016 22:10:38 PDT
Router Circle Jig Edge Guide http://www.instructables.com/id/Router-Circle-Jig-Edge-Guide/
Router Circle Jig Edge Guide - More DIY How To Projects]]> http://cdn.instructables.com/FH6/RK8U/IOIQNEZV/FH6RK8UIOIQNEZV.SQUARE2.jpg http://cdn.instructables.com/FH6/RK8U/IOIQNEZV/FH6RK8UIOIQNEZV.SQUARE.jpg http://cdn.instructables.com/FH6/RK8U/IOIQNEZV/FH6RK8UIOIQNEZV.SMALL.jpg djpolymath Build a circle jig that doubles as an edge guide. Measure Measure up a length of 1/4 inch thick wood that will accommodate a router. Cut Edge Guide Measure and cut a piece of wood to use as a guide. Cut Cut the 1/4 inch thick wood to size. Measure and Mark Cut a second piece of wood t...
By: djpolymath

Continue Reading »]]>
Sun, 22 May 2016 18:48:50 PDT
Reclaimed Wood Sign http://www.instructables.com/id/Reclaimed-Wood-Sign-1/
Reclaimed Wood Sign - More DIY How To Projects]]> http://cdn.instructables.com/FC2/M2C9/IOH8P7ED/FC2M2C9IOH8P7ED.SQUARE2.jpg http://cdn.instructables.com/FC2/M2C9/IOH8P7ED/FC2M2C9IOH8P7ED.SQUARE.jpg http://cdn.instructables.com/FC2/M2C9/IOH8P7ED/FC2M2C9IOH8P7ED.SMALL.jpg hainsworth1 Thanks for looking into my first instructable, please vote for one or both contests if you like it! Build Your Sign You could do just about anything with these ideas. Here is how I made my Colorado Flag sign. Find some wood. I used an old fence picket that was tucked behind the shed. I think pall...
By: hainsworth1

Continue Reading »]]>
Sun, 22 May 2016 14:53:36 PDT
Accomplishment Frame **WEEKEND PROJECT** http://www.instructables.com/id/Accomplishment-Frame-WEEKEND-PROJECT/
Accomplishment Frame **WEEKEND PROJECT** - More DIY How To Projects]]> http://cdn.instructables.com/F8I/6BE4/IOIQLJT3/F8I6BE4IOIQLJT3.SQUARE2.jpg http://cdn.instructables.com/F8I/6BE4/IOIQLJT3/F8I6BE4IOIQLJT3.SQUARE.jpg http://cdn.instructables.com/F8I/6BE4/IOIQLJT3/F8I6BE4IOIQLJT3.SMALL.jpg Dravenumbra Welcome to yet another Instructable brought to you by Salad Mixer! (NOTE: Not actually brought to you by Salad Mixer)Over the course of the last year, I was a part of my city government advising the city council on environmental issues, eco-friendly cost saving actions, and alternative energy advanc...
By: Dravenumbra

Continue Reading »]]>
Sun, 22 May 2016 11:10:14 PDT
Receipt / Memo Holder http://www.instructables.com/id/Receipt-Memo-Holder/
Receipt / Memo Holder - More DIY How To Projects]]> http://cdn.instructables.com/FCG/SB7T/IOEKLGAH/FCGSB7TIOEKLGAH.SQUARE2.jpg http://cdn.instructables.com/FCG/SB7T/IOEKLGAH/FCGSB7TIOEKLGAH.SQUARE.jpg http://cdn.instructables.com/FCG/SB7T/IOEKLGAH/FCGSB7TIOEKLGAH.SMALL.jpg doppiej First of all, hi to all! This is my first Instructable and I would like to show you the process of making this really easy receipt / memo holder.I keep having all my receipts and memo in every room and on every corner of the table. They are everywhere until you need one and, of course, you can't fin...
By: doppiej

Continue Reading »]]>
Sat, 21 May 2016 20:32:07 PDT
Portable workbench http://www.instructables.com/id/Portable-Workbench-1/
Portable workbench - More DIY How To Projects]]> http://cdn.instructables.com/F2A/YI26/IOEKMLV1/F2AYI26IOEKMLV1.SQUARE2.jpg http://cdn.instructables.com/F2A/YI26/IOEKMLV1/F2AYI26IOEKMLV1.SQUARE.jpg http://cdn.instructables.com/F2A/YI26/IOEKMLV1/F2AYI26IOEKMLV1.SMALL.jpg Howterson I allways have all my stuff laying on the floor. So i decided to make a Workbench. But because i couldn't put it in the garage i thought i would just make it movabable. It is quite a difficult project. It takes about two days to make. And it is a big and heavy thing so don't expect to drag it around...
By: Howterson

Continue Reading »]]>
Sat, 21 May 2016 13:47:16 PDT
DIY X Y Z Axis Tailstock Lathe Homemade Router Wood Slide CNC Metal Milling Press Drill Mill http://www.instructables.com/id/DIY-X-Y-Z-Axis-Tailstock-Lathe-Homemade-Router-Woo/
DIY X Y Z Axis Tailstock Lathe Homemade Router Wood Slide CNC Metal Milling Press Drill Mill - More DIY How To Projects]]> http://cdn.instructables.com/F9O/FSQ0/IOIWCJYK/F9OFSQ0IOIWCJYK.SQUARE2.jpg http://cdn.instructables.com/F9O/FSQ0/IOIWCJYK/F9OFSQ0IOIWCJYK.SQUARE.jpg http://cdn.instructables.com/F9O/FSQ0/IOIWCJYK/F9OFSQ0IOIWCJYK.SMALL.jpg joulethief669 DIY X Y Z Axis Tailstock Lathe Homemade Router Wood Slide CNC Metal Milling Press Drill MillMaterials:1 pcs Aluminium 155 mm x 400 mm x 16 mm for bed1 pcs Aluminium 120 mm x 400 mm x 16 mm for top1 pcs SFU1605 Ball Screw Nut 1605 for RM1605 300 mm for ball screw 1605 cnc parts2 pcs SC20UU SCS16UU 20...
By: joulethief669

Continue Reading »]]>
Sat, 21 May 2016 09:05:30 PDT
Homemade Mini Press Drill Wood PCB Drilling DIY Collet ER11 Spindle Motor Drill Extension http://www.instructables.com/id/Homemade-Mini-Press-Drill-Wood-PCB-Drilling-DIY-Co/
Homemade Mini Press Drill Wood PCB Drilling DIY Collet ER11 Spindle Motor Drill Extension - More DIY How To Projects]]> http://cdn.instructables.com/FWY/ZPBZ/IOIWCIPG/FWYZPBZIOIWCIPG.SQUARE2.jpg http://cdn.instructables.com/FWY/ZPBZ/IOIWCIPG/FWYZPBZIOIWCIPG.SQUARE.jpg http://cdn.instructables.com/FWY/ZPBZ/IOIWCIPG/FWYZPBZIOIWCIPG.SMALL.jpg joulethief669 Homemade Mini Press Drill Wood PCB Drilling DIY Collet ER11 Spindle Motor Drill ExtensionHomemade Chuck Spindle Collet ER11 DIY here:Materials:1 pcs LMK25UU 25mm flange bearing CNC Flange Linear Bearings Flange Linear Bush1 pcs Aluminium 280 mm x 110 mm x 16 mm for bed1 pcs Aluminium 220 mm x 45 mm...
By: joulethief669

Continue Reading »]]>
Sat, 21 May 2016 09:05:29 PDT
Lighted Box http://www.instructables.com/id/Lighted-Box/
Lighted Box - More DIY How To Projects]]> http://cdn.instructables.com/FWO/3AMH/IOG1FVL0/FWO3AMHIOG1FVL0.SQUARE2.jpg http://cdn.instructables.com/FWO/3AMH/IOG1FVL0/FWO3AMHIOG1FVL0.SQUARE.jpg http://cdn.instructables.com/FWO/3AMH/IOG1FVL0/FWO3AMHIOG1FVL0.SMALL.jpg 73PowerStroke In this instructable you will learn how to make a small wooden box with a drawer that lights up when you open it. Building The Box 1 Find a few feet of scrap 2x4 wood planks and cut out two 8inch pieces and two 6inch pieces. Picture depicts only one 8inch and one 6inch piece. Building The Box...
By: 73PowerStroke

Continue Reading »]]>
Sat, 21 May 2016 08:10:24 PDT