Instructables: exploring - - cool - featured http://www.instructables.com Tue, 17 Jan 2017 21:13:00 PST BLOX v1.01 SpectrumLED V2.0 - The ULTIMATE Variable Spectrum Lamp! http://www.instructables.com/id/SpectrumLED-V20-the-ULTIMATE-Variable-Spectrum-Lam/
SpectrumLED V2.0 - The ULTIMATE Variable Spectrum Lamp! - More DIY How To Projects]]> https://cdn.instructables.com/FID/A80G/IY0FWD12/FIDA80GIY0FWD12.SQUARE2.jpg https://cdn.instructables.com/FID/A80G/IY0FWD12/FIDA80GIY0FWD12.SQUARE.jpg https://cdn.instructables.com/FID/A80G/IY0FWD12/FIDA80GIY0FWD12.SMALL.jpg Yonatan24 The story of SpectrumLED V2.0 -Too long? Watch the video, and then skip to the bottom of this step for a list of its features (Do this if you don't want to read everything):Back in 2015, I built SpectrumLED (V1) - An INSANELY Bright, 200 WATT, Variable Spectrum LED Panel. It was extremely useful - t...
By: Yonatan24

Continue Reading »]]>
Tue, 17 Jan 2017 07:45:37 PST
QUATTRO - the Arduino Quadruped Robot http://www.instructables.com/id/QUATTRO-the-Arduino-Quadruped-Robot/
QUATTRO - the Arduino Quadruped Robot - More DIY How To Projects]]> https://cdn.instructables.com/F8S/LJ8H/IXUSC0R8/F8SLJ8HIXUSC0R8.SQUARE2.jpg https://cdn.instructables.com/F8S/LJ8H/IXUSC0R8/F8SLJ8HIXUSC0R8.SQUARE.jpg https://cdn.instructables.com/F8S/LJ8H/IXUSC0R8/F8SLJ8HIXUSC0R8.SMALL.jpg Technovation Hi guys! Here's a spider robot that we had made for the 2016 science fair which was held at our school. Well, you can't technically call it a "spider robot" as spiders have 8 legs, but we atleast tried to make it look like a spider (or maybe spider like) . Our robot has four legs, so the correct ter...
By: Technovation

Continue Reading »]]>
Sun, 15 Jan 2017 09:25:36 PST
Aluminum Can Solar Heater http://www.instructables.com/id/Aluminum-Can-Solar-Heater/
Aluminum Can Solar Heater - More DIY How To Projects]]> https://cdn.instructables.com/F3B/9ABZ/IXUQ6VAZ/F3B9ABZIXUQ6VAZ.SQUARE2.jpg https://cdn.instructables.com/F3B/9ABZ/IXUQ6VAZ/F3B9ABZIXUQ6VAZ.SQUARE.jpg https://cdn.instructables.com/F3B/9ABZ/IXUQ6VAZ/F3B9ABZIXUQ6VAZ.SMALL.jpg Lillyvilleky This is how I made an aluminum can solar heater! Save cans Pop cans, beer cans, sparkling water cans, any aluminum cans you can save, save them! Gather supplies Once you have a bunch of aluminum cans saved, gather these supplies:Black spray paint (high heat) mine was for grills.High heat caulk...
By: Lillyvilleky

Continue Reading »]]>
Fri, 13 Jan 2017 16:46:15 PST
Infinity Mirror http://www.instructables.com/id/Infinity-Mirror/
Infinity Mirror - More DIY How To Projects]]> https://cdn.instructables.com/FEL/T5LP/IXUPZL5U/FELT5LPIXUPZL5U.SQUARE2.jpg https://cdn.instructables.com/FEL/T5LP/IXUPZL5U/FELT5LPIXUPZL5U.SQUARE.jpg https://cdn.instructables.com/FEL/T5LP/IXUPZL5U/FELT5LPIXUPZL5U.SMALL.jpg FrederickM17 After looking around for a fun project to do for my electronics class I soon found the idea of making an infinity mirror so I decided to make one. Materials needed: A lot of cardboard. Black spray paint. Led strip: https://www.amazon.com/gp/product/B00B2F3KDQ/ref=... Mirror film: https://www.a...
By: FrederickM17

Continue Reading »]]>
Thu, 12 Jan 2017 13:23:47 PST
ARDUINO _RFID _LCD (rfid security system) http://www.instructables.com/id/ARDUINO-RFID-LCD-rfid-Security-System/
ARDUINO _RFID _LCD (rfid security system) - More DIY How To Projects]]> https://cdn.instructables.com/FE0/F6YY/IXQG6BQN/FE0F6YYIXQG6BQN.SQUARE2.jpg https://cdn.instructables.com/FE0/F6YY/IXQG6BQN/FE0F6YYIXQG6BQN.SQUARE.jpg https://cdn.instructables.com/FE0/F6YY/IXQG6BQN/FE0F6YYIXQG6BQN.SMALL.jpg KJ ELECTRONICS In the following project we are going to make a rfid card reader by using the arduino uno and a rfid card reader.the following project can do a lot of things such as reading a tag adding of the tag and also the deleting of the tag WATCH THE VIDEO THINGS NEEDED To make the this project you nee...
By: KJ ELECTRONICS

Continue Reading »]]>
Thu, 12 Jan 2017 10:03:07 PST
How to:2 button 2 different led sequences http://www.instructables.com/id/How-To2-Button-2-Different-Led-Sequences/
How to:2 button 2 different led sequences - More DIY How To Projects]]> https://cdn.instructables.com/FPX/37HN/IXLAO7XH/FPX37HNIXLAO7XH.SQUARE2.jpg https://cdn.instructables.com/FPX/37HN/IXLAO7XH/FPX37HNIXLAO7XH.SQUARE.jpg https://cdn.instructables.com/FPX/37HN/IXLAO7XH/FPX37HNIXLAO7XH.SMALL.jpg alexb369 THIS IS A CODE IN WHICH HAS 2 DIFFERENT LED SEQUENCES FOR TWO SEPARTE BUTTONS! ENJOY!!! XD Hardware Required (12) light emitting diodes [leds]- divided into 4 sets of 3 with different colors(2) 10k resistors(2) momentary button switches [4 pins](1) Arduino uno R3(1) solderless bread board(1) usb ...
By: alexb369

Continue Reading »]]>
Sun, 8 Jan 2017 11:51:29 PST
How to Fold an Origami Star Wars U-wing From Rogue One http://www.instructables.com/id/How-to-Fold-an-Origami-Star-Wars-U-wing-From-Rogue/
How to Fold an Origami Star Wars U-wing From Rogue One - More DIY How To Projects]]> https://cdn.instructables.com/F2A/KHCU/IXLAEP9C/F2AKHCUIXLAEP9C.SQUARE2.jpg https://cdn.instructables.com/F2A/KHCU/IXLAEP9C/F2AKHCUIXLAEP9C.SQUARE.jpg https://cdn.instructables.com/F2A/KHCU/IXLAEP9C/F2AKHCUIXLAEP9C.SMALL.jpg Joe_Tutorials Welcome to my tutorial on how to fold the Star Wars U-wing from Rogue One! This Origami lesson is relatively simple and lots of fun. You may choose to read this instructable or watch my video to learn, and if you like my content, go ahead and subscribe to my channel. Lets get started! Fold the Dia...
By: Joe_Tutorials

Continue Reading »]]>
Sat, 7 Jan 2017 15:17:02 PST
Amazing Modern Art From Broken Electronics http://www.instructables.com/id/Amazing-Modern-Art-From-Broken-Electronics/
Amazing Modern Art From Broken Electronics - More DIY How To Projects]]> https://cdn.instructables.com/FZG/G6AP/IXLADTPB/FZGG6APIXLADTPB.SQUARE2.jpg https://cdn.instructables.com/FZG/G6AP/IXLADTPB/FZGG6APIXLADTPB.SQUARE.jpg https://cdn.instructables.com/FZG/G6AP/IXLADTPB/FZGG6APIXLADTPB.SMALL.jpg tanner_tech Within the hidden world of junk electronic devices, there are components that have the potential to become great looking pieces of modern art. In this instructable, I will show you how to find and convert thrown away electronic devices into amazing art displays that look like surreal alien forests....
By: tanner_tech

Continue Reading »]]>
Fri, 6 Jan 2017 08:45:06 PST
Bag-cum-Table http://www.instructables.com/id/Bag-cum-Table/
Bag-cum-Table - More DIY How To Projects]]> https://cdn.instructables.com/FBK/1PZG/IXAPYGJF/FBK1PZGIXAPYGJF.SQUARE2.jpg https://cdn.instructables.com/FBK/1PZG/IXAPYGJF/FBK1PZGIXAPYGJF.SQUARE.jpg https://cdn.instructables.com/FBK/1PZG/IXAPYGJF/FBK1PZGIXAPYGJF.SMALL.jpg Maanav. Hi friends,Today I am going to show you how to make a reuseable Bag which serves another purpose as a Table!First Pease VOTE FOR THIS INSTRUCTABLE because it is one of those few things which help us to save our environment. Next time you go shopping this cool bag will sure acompany you!This bag is a...
By: Maanav.

Continue Reading »]]>
Sat, 31 Dec 2016 06:26:01 PST
A Stylish Pattern Clock http://www.instructables.com/id/A-Stylish-Pattern-Clock/
A Stylish Pattern Clock - More DIY How To Projects]]> https://cdn.instructables.com/F2E/MRGU/IXAPZP0B/F2EMRGUIXAPZP0B.SQUARE2.jpg https://cdn.instructables.com/F2E/MRGU/IXAPZP0B/F2EMRGUIXAPZP0B.SQUARE.jpg https://cdn.instructables.com/F2E/MRGU/IXAPZP0B/F2EMRGUIXAPZP0B.SMALL.jpg Maanav. This is a really cool wall clock which will leave your guests amazed!You can also gift this clock to your relatives and friends as it is useful and stylish at the same time!Please VOTE FOR THIS INSTRUCTABLE under the contest "Home-made Gifts". Get the Stuff You dont need much stuff for this cool ...
By: Maanav.

Continue Reading »]]>
Sat, 31 Dec 2016 04:16:39 PST
Rustic Bonsai Tree Shelf/Rack http://www.instructables.com/id/Rustic-Bonsai-Tree-ShelfRack/
Rustic Bonsai Tree Shelf/Rack - More DIY How To Projects]]> https://cdn.instructables.com/FX9/PXSP/IX6FY9ZQ/FX9PXSPIX6FY9ZQ.SQUARE2.jpg https://cdn.instructables.com/FX9/PXSP/IX6FY9ZQ/FX9PXSPIX6FY9ZQ.SQUARE.jpg https://cdn.instructables.com/FX9/PXSP/IX6FY9ZQ/FX9PXSPIX6FY9ZQ.SMALL.jpg Jasmin D When you prune a tree don't just throw out or burn the limbs look for unique ways to use them, We have a lot of fun doing this, and its a great way to recycle and make something useful! Tree Pruning I followed my dad out to the orchard where he was pruning some overgrown autumn olive bushes...
By: Jasmin D

Continue Reading »]]>
Wed, 28 Dec 2016 16:38:33 PST
Start Fires With Electricity: DIY Arc Lighter http://www.instructables.com/id/Start-Fires-With-Electricity-DIY-Arc-Lighter/
Start Fires With Electricity: DIY Arc Lighter - More DIY How To Projects]]> https://cdn.instructables.com/FO0/Y895/IX6FMP3J/FO0Y895IX6FMP3J.SQUARE2.jpg https://cdn.instructables.com/FO0/Y895/IX6FMP3J/FO0Y895IX6FMP3J.SQUARE.jpg https://cdn.instructables.com/FO0/Y895/IX6FMP3J/FO0Y895IX6FMP3J.SMALL.jpg tanner_tech Have you ever wanted a futuristic way to start a fire, or maybe just a cool desk toy that makes plasma? Have you wanted to start a winter fire in a way that does not involve an actual lighter with lighter fluid? Have you ever wanted a lighter that you never have to replace or refill? If so, then ...
By: tanner_tech

Continue Reading »]]>
Mon, 26 Dec 2016 21:01:20 PST
Dungeons & Dragons Dice Box http://www.instructables.com/id/Dungeons-Dragons-Dice-Box/
Dungeons & Dragons Dice Box - More DIY How To Projects]]> https://cdn.instructables.com/FS7/Q7BG/IX0PVYRK/FS7Q7BGIX0PVYRK.SQUARE2.jpg https://cdn.instructables.com/FS7/Q7BG/IX0PVYRK/FS7Q7BGIX0PVYRK.SQUARE.jpg https://cdn.instructables.com/FS7/Q7BG/IX0PVYRK/FS7Q7BGIX0PVYRK.SMALL.jpg Sir M I was looking around on the internet for a tutorial to make a box to store my D&D dice sets in, but I only found one good one here on instructables... so I made my own!!! Matirials and Outlining Stuff I used was:Templates (Click on the link provided)Wood ( I used wood that was 1/2 inch thick to ...
By: Sir M

Continue Reading »]]>
Sat, 24 Dec 2016 07:43:45 PST
Light bulb Window sill planter http://www.instructables.com/id/Light-Bulb-Window-Seal-Planter/
Light bulb Window sill planter - More DIY How To Projects]]> https://cdn.instructables.com/FRI/XHDA/IX0PV76C/FRIXHDAIX0PV76C.SQUARE2.jpg https://cdn.instructables.com/FRI/XHDA/IX0PV76C/FRIXHDAIX0PV76C.SQUARE.jpg https://cdn.instructables.com/FRI/XHDA/IX0PV76C/FRIXHDAIX0PV76C.SMALL.jpg yazi33 It's Christmas break and I was itching to make a new project now that I have some free time after exams. Came to Instructables and saw a contest that got the creative juices flowing so if you like my project please take a moment to vote for me :)Here is a really cute quirky way to use old wood and b...
By: yazi33

Continue Reading »]]>
Fri, 23 Dec 2016 16:39:53 PST
ARDUINO BLUETOOTH HOME CONTROL(ANDROID AND GOOGLE APP INVENTOR) http://www.instructables.com/id/ARDUINO-BLUETOOTH-HOME-CONTROLANDROID-AND-GOOGLE-A/
ARDUINO BLUETOOTH HOME CONTROL(ANDROID AND GOOGLE APP INVENTOR) - More DIY How To Projects]]> https://cdn.instructables.com/FHQ/5LCI/IWWFRU1A/FHQ5LCIIWWFRU1A.SQUARE2.jpg https://cdn.instructables.com/FHQ/5LCI/IWWFRU1A/FHQ5LCIIWWFRU1A.SQUARE.jpg https://cdn.instructables.com/FHQ/5LCI/IWWFRU1A/FHQ5LCIIWWFRU1A.SMALL.jpg KJ ELECTRONICS IN THE FOLLOWING PROJECT WE ARE GOING TO MAKE A WIRELESS BASED HOME AUTOMATION SYSTEM FROM WHICH WE CAN CONTROLL THE HOME APPLIANCES THROUGH OUR ANDROID DEVICE WATCH THE VIDEO THINGS NEEDED To make the arduino home automation you need the following things1.ARDUINO UNO OR ANY ARDUINO BOARD2.BL...
By: KJ ELECTRONICS

Continue Reading »]]>
Wed, 21 Dec 2016 23:49:48 PST
CNC Dodecahedron Speaker Build http://www.instructables.com/id/Dodecahedron-Speaker-Build/
CNC Dodecahedron Speaker Build - More DIY How To Projects]]> https://cdn.instructables.com/FGJ/H6LO/IWWFS62T/FGJH6LOIWWFS62T.SQUARE2.jpg https://cdn.instructables.com/FGJ/H6LO/IWWFS62T/FGJH6LOIWWFS62T.SQUARE.jpg https://cdn.instructables.com/FGJ/H6LO/IWWFS62T/FGJH6LOIWWFS62T.SMALL.jpg Nickolae I have wanted to do another speaker project for a while since my last one turned out surprisingly well!This time though I wanted to go big and make something crazy with my Shapeoko and this is the final write up of how the project unfurled into the final product!If you like this project please don't...
By: Nickolae

Continue Reading »]]>
Wed, 21 Dec 2016 14:39:59 PST
A DIY Christmas tree candle with a 3D printed mould! (TfCD) http://www.instructables.com/id/A-DIY-Christmas-Tree-Candle-With-a-3D-Printed-Moul/
A DIY Christmas tree candle with a 3D printed mould! (TfCD) - More DIY How To Projects]]> https://cdn.instructables.com/F8A/DJG3/IWWFK7OW/F8ADJG3IWWFK7OW.SQUARE2.jpg https://cdn.instructables.com/F8A/DJG3/IWWFK7OW/F8ADJG3IWWFK7OW.SQUARE.jpg https://cdn.instructables.com/F8A/DJG3/IWWFK7OW/F8ADJG3IWWFK7OW.SMALL.jpg FunkyCreator Hello fellow Instructionists! Welcome to our first instructable: a DIY Christmas tree candle with a 3D printed mould! We have been thinking much to come up with a fun new application of 3D printing technology to keep you busy during the holidays! You can do so many cool things with 3D printers, but...
By: FunkyCreator

Continue Reading »]]>
Tue, 20 Dec 2016 13:48:33 PST
Reinventing Musical Christmas Lights: How to Easily Engineer a Radio Controlled Light Show http://www.instructables.com/id/Reinventing-Musical-Christmas-Lights-How-to-Easily/
Reinventing Musical Christmas Lights: How to Easily Engineer a Radio Controlled Light Show - More DIY How To Projects]]> https://cdn.instructables.com/FXO/IP0P/IWQV9YX5/FXOIP0PIWQV9YX5.SQUARE2.jpg https://cdn.instructables.com/FXO/IP0P/IWQV9YX5/FXOIP0PIWQV9YX5.SQUARE.jpg https://cdn.instructables.com/FXO/IP0P/IWQV9YX5/FXOIP0PIWQV9YX5.SMALL.jpg tanner_tech Have you ever gotten tired of the dull monotony of solid unblinking Christmas Lights? Have you ever seen the videos of other people's spectacular Christmas Light displays, but were discouraged from having your own because of the high cost and difficulty of setting up your own yard? Well, If you ha...
By: tanner_tech

Continue Reading »]]>
Sun, 18 Dec 2016 20:33:01 PST
How to play... MANCALA!!! http://www.instructables.com/id/How-to-play-MANCALA/
How to play... MANCALA!!! - More DIY How To Projects]]> https://cdn.instructables.com/FA2/WIG1/FJ32D465/FA2WIG1FJ32D465.SQUARE2.jpg https://cdn.instructables.com/FA2/WIG1/FJ32D465/FA2WIG1FJ32D465.SQUARE.jpg https://cdn.instructables.com/FA2/WIG1/FJ32D465/FA2WIG1FJ32D465.SMALL.jpg YummyPancakes The first in a series of Instructables (well, I might not make the others... I'll try to remember) known as "How to play...". In this series, I will teach you how to play some popular and fun board games, as well as give you some strategy, which makes it different from the poorly worded, unillustrat...
By: YummyPancakes

Continue Reading »]]>
Fri, 25 Jul 2008 18:05:12 PDT
How to throw a Playing Card like a Pro http://www.instructables.com/id/How-to-Throw-a-Playing-Card-Like-a-Pro/
How to throw a Playing Card like a Pro - More DIY How To Projects]]> https://cdn.instructables.com/F6M/TWN7/IWQV1XL9/F6MTWN7IWQV1XL9.SQUARE2.jpg https://cdn.instructables.com/F6M/TWN7/IWQV1XL9/F6MTWN7IWQV1XL9.SQUARE.jpg https://cdn.instructables.com/F6M/TWN7/IWQV1XL9/F6MTWN7IWQV1XL9.SMALL.jpg NanoBear-E33 Hey, this is an EASY way to do something awesome and impressive;) The Grip Super simple. Grip the end of the card in-between your index, and your middle finger. And have your hand cocked back as far as possible. Kinda like a Frisbee. Da Flick Again... Like a Frisbee, just flick your hand and ...
By: NanoBear-E33

Continue Reading »]]>
Fri, 16 Dec 2016 06:57:36 PST
Rustic cut out of license plate state sign http://www.instructables.com/id/Rustic-Cut-Out-of-License-Plate-State-Sign/
Rustic cut out of license plate state sign - More DIY How To Projects]]> https://cdn.instructables.com/FKC/Q650/IWMR1W39/FKCQ650IWMR1W39.SQUARE2.jpg https://cdn.instructables.com/FKC/Q650/IWMR1W39/FKCQ650IWMR1W39.SQUARE.jpg https://cdn.instructables.com/FKC/Q650/IWMR1W39/FKCQ650IWMR1W39.SMALL.jpg woodbuilder1234 This is a very easy and fun sign to make and you can make it any of the 50 great states we have, this all cost me around 10 dollars (or nothing if you have the materials laying around). So everyone grab your extra license plates and lets get started making this awesome sign!!! Get your stuff toget...
By: woodbuilder1234

Continue Reading »]]>
Wed, 14 Dec 2016 19:00:20 PST
Drill coolant system http://www.instructables.com/id/Drill-Coolant-System/
Drill coolant system - More DIY How To Projects]]> https://cdn.instructables.com/FI1/SCYI/IWI0S8FQ/FI1SCYIIWI0S8FQ.SQUARE2.jpg https://cdn.instructables.com/FI1/SCYI/IWI0S8FQ/FI1SCYIIWI0S8FQ.SQUARE.jpg https://cdn.instructables.com/FI1/SCYI/IWI0S8FQ/FI1SCYIIWI0S8FQ.SMALL.jpg DanielR34 I made this to protect drill against overheating, during drilling thick sheet of metal. What you'll need This Mini pump Hose Wires Jar with cap Cable (USB) Switch First assembly I built it like this: Added hoses to input and output on pump, made hole into cap with screwdriver, put input hose ...
By: DanielR34

Continue Reading »]]>
Sun, 11 Dec 2016 07:03:26 PST
DIY Santa http://www.instructables.com/id/DIY-Santa/
DIY Santa - More DIY How To Projects]]> https://cdn.instructables.com/FNY/1ES8/IWH3EDNN/FNY1ES8IWH3EDNN.SQUARE2.jpg https://cdn.instructables.com/FNY/1ES8/IWH3EDNN/FNY1ES8IWH3EDNN.SQUARE.jpg https://cdn.instructables.com/FNY/1ES8/IWH3EDNN/FNY1ES8IWH3EDNN.SMALL.jpg Ehlers_TV Hohoho! Looking for new ways to make gift-giving more special? Make holiday presents stand out by decorating them with an Origami Santa....Here is the link to my Youtube Tutorial: Origami Santa - How to fold himMerry Christmas.....The song: Jingle Bells von Kevin MacLeod ist unter der Lizenz Creativ...
By: Ehlers_TV

Continue Reading »]]>
Sun, 11 Dec 2016 00:51:57 PST
Lotus Meditation Cube http://www.instructables.com/id/Lotus-Meditation-Cube/
Lotus Meditation Cube - More DIY How To Projects]]> https://cdn.instructables.com/FV8/OX6J/IWI0R77W/FV8OX6JIWI0R77W.SQUARE2.jpg https://cdn.instructables.com/FV8/OX6J/IWI0R77W/FV8OX6JIWI0R77W.SQUARE.jpg https://cdn.instructables.com/FV8/OX6J/IWI0R77W/FV8OX6JIWI0R77W.SMALL.jpg Jeeves Thommy The idea: I have been dealing with a little bit of run away anxiety and stress lately so I started to practice meditation. One thing that I noticed help me stay present while meditating, was if I placed a candle in front of me and mindfully paid attention to the flickering flame. I built the Lotus M...
By: Jeeves Thommy

Continue Reading »]]>
Sun, 11 Dec 2016 06:23:21 PST
ARDUINO WIRELESS LED DISPLAY BANNER(24X6 LED DISPLAY) http://www.instructables.com/id/ARDUINO-WIRELESS-LED-DISPLAY-BANNER24X6-LED-DISPLA/
ARDUINO WIRELESS LED DISPLAY BANNER(24X6 LED DISPLAY) - More DIY How To Projects]]> https://cdn.instructables.com/FLO/I129/IWI0P6FE/FLOI129IWI0P6FE.SQUARE2.jpg https://cdn.instructables.com/FLO/I129/IWI0P6FE/FLOI129IWI0P6FE.SQUARE.jpg https://cdn.instructables.com/FLO/I129/IWI0P6FE/FLOI129IWI0P6FE.SMALL.jpg KJ ELECTRONICS This is a instructables for creating the wireless led matrix display..Today's life is all about the digital banners about the advertisement .when we a board with its scrolling text we think how difficult it could be to make that display but believe me its not hat hard its just a need of a cheap ...
By: KJ ELECTRONICS

Continue Reading »]]>
Sat, 10 Dec 2016 02:13:10 PST
Concrete table http://www.instructables.com/id/Concrete-Table/
Concrete table - More DIY How To Projects]]> https://cdn.instructables.com/FTI/NOSD/IWH397ZE/FTINOSDIWH397ZE.SQUARE2.jpg https://cdn.instructables.com/FTI/NOSD/IWH397ZE/FTINOSDIWH397ZE.SQUARE.jpg https://cdn.instructables.com/FTI/NOSD/IWH397ZE/FTINOSDIWH397ZE.SMALL.jpg woodbuilder1234 this is a very fast and easy table to make and it looks cool too for outside on your patio The cuts you need to make i wanted to make sure this wasn't going to be top heavy so i measured them out and cut them at these angles to make the table nice and sturdy Step 2 next i used a kreig mini jig...
By: woodbuilder1234

Continue Reading »]]>
Sat, 10 Dec 2016 06:00:51 PST
Bullet Shell Trench Lighter http://www.instructables.com/id/Bullet-Shell-Trench-Lighter/
Bullet Shell Trench Lighter - More DIY How To Projects]]> https://cdn.instructables.com/F0K/VQ5M/IUSLND5L/F0KVQ5MIUSLND5L.SQUARE2.jpg https://cdn.instructables.com/F0K/VQ5M/IUSLND5L/F0KVQ5MIUSLND5L.SQUARE.jpg https://cdn.instructables.com/F0K/VQ5M/IUSLND5L/F0KVQ5MIUSLND5L.SMALL.jpg Pyro_and_projects You will need: four pices of string, one Cotten ball, one bullet casing, one dead lighter, some lighter fluid, bees wax, pewter or lead or tin, sand, a spoon and timeTOOLS blow torch, drill, drill bits and pliers WICK!!!!!!!! It's time to make the wick. You can skip this step by just using a ro...
By: Pyro_and_projects

Continue Reading »]]>
Fri, 9 Dec 2016 09:04:59 PST
Cheap DIY Ambientlight using Arduino http://www.instructables.com/id/Cheap-Ambilight-Tutorial-for-PC-Using-Arduino/
Cheap DIY Ambientlight using Arduino - More DIY How To Projects]]> https://cdn.instructables.com/FLW/AGGV/IW6PDW7O/FLWAGGVIW6PDW7O.SQUARE2.jpg https://cdn.instructables.com/FLW/AGGV/IW6PDW7O/FLWAGGVIW6PDW7O.SQUARE.jpg https://cdn.instructables.com/FLW/AGGV/IW6PDW7O/FLWAGGVIW6PDW7O.SMALL.jpg VladI4 Picture of the product - my 40" 4K Desktop with DIY AmbilightThe Ambilight in this picture is completely DIY and uses some cheap RGB LEDs with integrated controllers and an Arduino. On the Software side, there is Ambibox running on the PC (Windows only) and the FastLED library on the Arduino!The Amb...
By: VladI4

Continue Reading »]]>
Thu, 1 Dec 2016 12:37:29 PST
Funky Hat http://www.instructables.com/id/Funky-Hat/
Funky Hat - More DIY How To Projects]]> https://cdn.instructables.com/FIV/WY50/IVO4HNYR/FIVWY50IVO4HNYR.SQUARE2.jpg https://cdn.instructables.com/FIV/WY50/IVO4HNYR/FIVWY50IVO4HNYR.SQUARE.jpg https://cdn.instructables.com/FIV/WY50/IVO4HNYR/FIVWY50IVO4HNYR.SMALL.jpg pranali19 hat becomes a major part of our accessory when it comes to fashion. it makes our look more trendy and cool. so choosing a good hat becomes very important.i am sure most of us buy hats occasionally, but what do you do when it gets old?? we generally throw it out, right?? so how about instead of throw...
By: pranali19

Continue Reading »]]>
Mon, 28 Nov 2016 01:20:24 PST
The Lightning Machine: How to Build a Tesla Coil http://www.instructables.com/id/The-Lightning-Machine-How-to-Build-a-Tesla-Coil/
The Lightning Machine: How to Build a Tesla Coil - More DIY How To Projects]]> https://cdn.instructables.com/FN5/ZENI/IVMQ63CQ/FN5ZENIIVMQ63CQ.SQUARE2.jpg https://cdn.instructables.com/FN5/ZENI/IVMQ63CQ/FN5ZENIIVMQ63CQ.SQUARE.jpg https://cdn.instructables.com/FN5/ZENI/IVMQ63CQ/FN5ZENIIVMQ63CQ.SMALL.jpg tanner_tech Have you ever wanted the power to create a lightning storm in your house? Have you ever wanted to build the famous machine in the movies that creates giant sparks that jump into the air? If you have, then you are in luck! About 128 years ago, genius inventor Nikola Tesla invented a machine that ...
By: tanner_tech

Continue Reading »]]>
Sat, 26 Nov 2016 18:37:21 PST
Make a stylish portable speaker(from scratch) http://www.instructables.com/id/Make-a-Stylish-Portable-Speakerfrom-Scratch/
Make a stylish portable speaker(from scratch) - More DIY How To Projects]]> https://cdn.instructables.com/F1V/25WH/IVO4ADE6/F1V25WHIVO4ADE6.SQUARE2.jpg https://cdn.instructables.com/F1V/25WH/IVO4ADE6/F1V25WHIVO4ADE6.SQUARE.jpg https://cdn.instructables.com/F1V/25WH/IVO4ADE6/F1V25WHIVO4ADE6.SMALL.jpg diyfuntech In this Instructable, I will show you how to make a Portable Speaker from Scratch, this portable speaker has Built In FM Radio, Aux Support, Sd card reader, Usb reader(can play music from a SD card or a USB thumb drive). Why did I make this?The main reason I built this portable speaker is because I ...
By: diyfuntech

Continue Reading »]]>
Sat, 26 Nov 2016 11:23:03 PST
Ultimate survival knife project http://www.instructables.com/id/Ultimate-Survival-Knife-Project/
Ultimate survival knife project - More DIY How To Projects]]> https://cdn.instructables.com/FQJ/EKGW/IXQG3FRK/FQJEKGWIXQG3FRK.SQUARE2.jpg https://cdn.instructables.com/FQJ/EKGW/IXQG3FRK/FQJEKGWIXQG3FRK.SQUARE.jpg https://cdn.instructables.com/FQJ/EKGW/IXQG3FRK/FQJEKGWIXQG3FRK.SMALL.jpg juninhofensky The basic survival gear is a knife, so today I am going to be showing you how to make a knife, but not just any knife, a bush craft knife. lets get started.:Things you’ll need Tools1. Grinder2. Emery3. Clamps4. Vice grip 5. ...
By: juninhofensky

Continue Reading »]]>
Thu, 24 Nov 2016 14:44:21 PST
3D Printed Wendigo Skeleton - Freedownload ^^ http://www.instructables.com/id/3D-Printed-Wendigo-Skeleton-Freedownload-/
3D Printed Wendigo Skeleton - Freedownload ^^ - More DIY How To Projects]]> https://cdn.instructables.com/FIR/TSOW/IVO3YC5S/FIRTSOWIVO3YC5S.SQUARE2.jpg https://cdn.instructables.com/FIR/TSOW/IVO3YC5S/FIRTSOWIVO3YC5S.SQUARE.jpg https://cdn.instructables.com/FIR/TSOW/IVO3YC5S/FIRTSOWIVO3YC5S.SMALL.jpg LordLilaPause I build it!!! xD Download my Files =) Just download it to your computer. Insert in a slicer Add stl`s in a SlicerU can use Cura ( https://ultimaker.com/en/products/cura-software ), i use Simplify3DMirror all parts with an RPrint settings must be:1st Layer 0.3mm, all others With support and m...
By: LordLilaPause

Continue Reading »]]>
Thu, 24 Nov 2016 09:00:01 PST
The Luggage Speaker http://www.instructables.com/id/The-Luggage-Speaker/
The Luggage Speaker - More DIY How To Projects]]> https://cdn.instructables.com/F51/Q4UB/IVO39QON/F51Q4UBIVO39QON.SQUARE2.jpg https://cdn.instructables.com/F51/Q4UB/IVO39QON/F51Q4UBIVO39QON.SQUARE.jpg https://cdn.instructables.com/F51/Q4UB/IVO39QON/F51Q4UBIVO39QON.SMALL.jpg Noahrothberg A faux leather wrapped Speaker system. Build Box design and create wood box, and then wrap with textured paper. Then add box hardware. Solder board Make a circuit board that has 4 amplifiers for 4 speakers. Attach board Attach board to the box. Final box Now the box is complete. The buil...
By: Noahrothberg

Continue Reading »]]>
Fri, 18 Nov 2016 12:58:43 PST
Cool Floating Spinning Disk http://www.instructables.com/id/Cool-Floating-Spinning-Disk/
Cool Floating Spinning Disk - More DIY How To Projects]]> https://cdn.instructables.com/FIV/QOD8/IVA518VU/FIVQOD8IVA518VU.SQUARE2.jpg https://cdn.instructables.com/FIV/QOD8/IVA518VU/FIVQOD8IVA518VU.SQUARE.jpg https://cdn.instructables.com/FIV/QOD8/IVA518VU/FIVQOD8IVA518VU.SMALL.jpg NeverI bored? this will help you pass the time! materials one screw (preferably one that's not pointed at the end)one high power computer fanone high power batterysuper glue a platform thinner than the fan, but not longer!a CD or dvdthat's about it glue it super glue the screw head down to the center...
By: NeverI

Continue Reading »]]>
Sat, 12 Nov 2016 08:45:03 PST
COOL CROCHET SLING BAG http://www.instructables.com/id/COOL-CROCHET-SLING-BAG/
COOL CROCHET SLING BAG - More DIY How To Projects]]> https://cdn.instructables.com/F70/DKUZ/IVA4TFUI/F70DKUZIVA4TFUI.SQUARE2.jpg https://cdn.instructables.com/F70/DKUZ/IVA4TFUI/F70DKUZIVA4TFUI.SQUARE.jpg https://cdn.instructables.com/F70/DKUZ/IVA4TFUI/F70DKUZIVA4TFUI.SMALL.jpg prasi05 In today's life fashion has utmost importance and this makes us to invent or rather create more cool, trendy things. when it comes to fashion, the bags which we choose makes a huge difference. and all have to agree with me that we choose accessories like sling bags with utmost care. so instead of se...
By: prasi05

Continue Reading »]]>
Fri, 11 Nov 2016 07:56:32 PST
Illuminate Lightbulbs Wirelessly: DIY Slayer Exciter http://www.instructables.com/id/Illuminate-Lightbulbs-Wirelessly-DIY-Slayer-Excite/
Illuminate Lightbulbs Wirelessly: DIY Slayer Exciter - More DIY How To Projects]]> https://cdn.instructables.com/FXG/GO41/IVA4P38J/FXGGO41IVA4P38J.SQUARE2.jpg https://cdn.instructables.com/FXG/GO41/IVA4P38J/FXGGO41IVA4P38J.SQUARE.jpg https://cdn.instructables.com/FXG/GO41/IVA4P38J/FXGGO41IVA4P38J.SMALL.jpg tanner_tech Have you ever wanted to be able to control the powers of wireless electricity? Have you ever wanted to build something that can light CFL bulbs from your hand? If so, then this is the perfect instructable for you. In this instructable, I will show you how to build a device called a slayer excite...
By: tanner_tech

Continue Reading »]]>
Thu, 10 Nov 2016 14:51:27 PST
Wonder Woman Costume http://www.instructables.com/id/Wonder-Woman-Costume/
Wonder Woman Costume - More DIY How To Projects]]> https://cdn.instructables.com/FUH/VWDF/IV0BM025/FUHVWDFIV0BM025.SQUARE2.jpg https://cdn.instructables.com/FUH/VWDF/IV0BM025/FUHVWDFIV0BM025.SQUARE.jpg https://cdn.instructables.com/FUH/VWDF/IV0BM025/FUHVWDFIV0BM025.SMALL.jpg Fuzzy Monkey Make your very own Wonder Woman costume, completely from scratch! Impress your friends, family, and strangers with your amazing costume, and empower women while you are at it by representing strong women throughout history! I hope you enjoy this tutorial on how to make a Wonder Woman costume, and go...
By: Fuzzy Monkey

Continue Reading »]]>
Mon, 7 Nov 2016 19:22:17 PST
Make a Shield From the Patterns on Coins http://www.instructables.com/id/Make-a-Shield-From-the-Patterns-on-Coins/
Make a Shield From the Patterns on Coins - More DIY How To Projects]]> https://cdn.instructables.com/FXB/B7MS/IV0AOMKR/FXBB7MSIV0AOMKR.SQUARE2.jpg https://cdn.instructables.com/FXB/B7MS/IV0AOMKR/FXBB7MSIV0AOMKR.SQUARE.jpg https://cdn.instructables.com/FXB/B7MS/IV0AOMKR/FXBB7MSIV0AOMKR.SMALL.jpg super_me Hi again,This instructable is kind of like a puzzle, so I hope you enjoy it. This shield that is made up from different coins looks quite cool - I was thinking of gluing it to some stiff card and displaying it inside a picture frame. Though I haven't got quite round to it yet...you might like to do ...
By: super_me

Continue Reading »]]>
Sun, 6 Nov 2016 10:05:48 PST
Flower Magnets http://www.instructables.com/id/Flower-Magnets/
Flower Magnets - More DIY How To Projects]]> https://cdn.instructables.com/FWK/38I8/IV0B1UN6/FWK38I8IV0B1UN6.SQUARE2.jpg https://cdn.instructables.com/FWK/38I8/IV0B1UN6/FWK38I8IV0B1UN6.SQUARE.jpg https://cdn.instructables.com/FWK/38I8/IV0B1UN6/FWK38I8IV0B1UN6.SMALL.jpg FunInventor11 Want to learn how to make flower magnets? You can learn here! Have fun! Gather all the of the supplies You need: baking cups, one piece of green paper or you can color a piece of paper green, scissors, wet glue, a magnet you can cut ( you can get one from the back of a magnet list pad, get an wo...
By: FunInventor11

Continue Reading »]]>
Sun, 6 Nov 2016 12:41:47 PST
How to paint your fingernails http://www.instructables.com/id/How-to-Paint-You-Finger-nails/
How to paint your fingernails - More DIY How To Projects]]> https://cdn.instructables.com/FOF/IIAH/IV0AP3E6/FOFIIAHIV0AP3E6.SQUARE2.jpg https://cdn.instructables.com/FOF/IIAH/IV0AP3E6/FOFIIAHIV0AP3E6.SQUARE.jpg https://cdn.instructables.com/FOF/IIAH/IV0AP3E6/FOFIIAHIV0AP3E6.SMALL.jpg FunInventor11 Do you want to learn how to paint your nails? Just look at this inscrutable to learn how! Before starting read ALL of the steps! When I was younger I didn't know about some of the steps like putting on a clear coat and how much color and how to put it on. Gather all the materials The most im...
By: FunInventor11

Continue Reading »]]>
Sat, 5 Nov 2016 08:35:26 PDT
Mini Rocket - Mini fusée http://www.instructables.com/id/Mini-Rocket-Mini-Fusée/
Mini Rocket - Mini fusée - More DIY How To Projects]]> https://cdn.instructables.com/FOP/09LM/IV0A8196/FOP09LMIV0A8196.SQUARE2.jpg https://cdn.instructables.com/FOP/09LM/IV0A8196/FOP09LMIV0A8196.SQUARE.jpg https://cdn.instructables.com/FOP/09LM/IV0A8196/FOP09LMIV0A8196.SMALL.jpg rudyexplor This experience allows us to visualized: the differences in density and convection current.Click to subscribe on my Youtube Channel► https://goo.gl/3KKlwU (thank you).The launch of an empty tea bag allows us to observe the power density differences and convection currents. Prepare the launcher ...
By: rudyexplor

Continue Reading »]]>
Wed, 2 Nov 2016 05:31:21 PDT
Emoji Magnets http://www.instructables.com/id/Emoji-Magnets/
Emoji Magnets - More DIY How To Projects]]> https://cdn.instructables.com/FDM/TAGD/IUSM1QXC/FDMTAGDIUSM1QXC.SQUARE2.jpg https://cdn.instructables.com/FDM/TAGD/IUSM1QXC/FDMTAGDIUSM1QXC.SQUARE.jpg https://cdn.instructables.com/FDM/TAGD/IUSM1QXC/FDMTAGDIUSM1QXC.SMALL.jpg FunInventor11 Want something to decorate your locker with? Is your fridge looking plain? Need to make a last minute gift? Here's how to make emoji magnets! Make the head Trace something round with your pencil. (Glue stick, button, anything round really.) This will be the emoji's head. Make the number of circle...
By: FunInventor11

Continue Reading »]]>
Sun, 30 Oct 2016 18:17:30 PDT
Extreme Pumpkin Carving: Frankenstein Style http://www.instructables.com/id/Extreme-Pumpkin-Carving-Frankenstein-Style/
Extreme Pumpkin Carving: Frankenstein Style - More DIY How To Projects]]> https://cdn.instructables.com/FCS/LCDS/IUOI9E0Z/FCSLCDSIUOI9E0Z.SQUARE2.jpg https://cdn.instructables.com/FCS/LCDS/IUOI9E0Z/FCSLCDSIUOI9E0Z.SQUARE.jpg https://cdn.instructables.com/FCS/LCDS/IUOI9E0Z/FCSLCDSIUOI9E0Z.SMALL.jpg tanner_tech Do you feel like your jack-o-lantern missing something? Do you want to carve your Halloween pumpkin in an awesome new way? If so, then this instructable is for you. In this instructable, I will show you how to carve a pumpkin using high voltage. The high voltage creates cool looking marks on the...
By: tanner_tech

Continue Reading »]]>
Wed, 26 Oct 2016 17:50:09 PDT
How to Make a Relaxing Wine Bottle Aquascape in Just 10 Easy Steps http://www.instructables.com/id/How-to-Make-a-Relaxing-Wine-Bottle-Aquascape-in-Ju/
How to Make a Relaxing Wine Bottle Aquascape in Just 10 Easy Steps - More DIY How To Projects]]> https://cdn.instructables.com/FOU/PFXK/IUOHQ5EA/FOUPFXKIUOHQ5EA.SQUARE2.jpg https://cdn.instructables.com/FOU/PFXK/IUOHQ5EA/FOUPFXKIUOHQ5EA.SQUARE.jpg https://cdn.instructables.com/FOU/PFXK/IUOHQ5EA/FOUPFXKIUOHQ5EA.SMALL.jpg BalVino Productions This is my very first DIY!More details and BalVino balancing wine bottle holders can be found on my website - http://balvinoproductions.com/wood-and-wine-blog/I am planning on a DIY for the BalVino balancing wine holders next! I'm going to show you how to create this cool project that will look grea...
By: BalVino Productions

Continue Reading »]]>
Tue, 25 Oct 2016 10:04:02 PDT
Camping van shower http://www.instructables.com/id/Camping-Van-Shower/
Camping van shower - More DIY How To Projects]]> https://cdn.instructables.com/FQF/KU6O/IUORLOM2/FQFKU6OIUORLOM2.SQUARE2.jpg https://cdn.instructables.com/FQF/KU6O/IUORLOM2/FQFKU6OIUORLOM2.SQUARE.jpg https://cdn.instructables.com/FQF/KU6O/IUORLOM2/FQFKU6OIUORLOM2.SMALL.jpg Lordii I could not find a portable camping shower that would be suitable for my van which requires to contain the water, so I made one.It's not perfect, consider it a prototype.A 210 litre drum was used with a Hozelock portashower. Cutting the drum I cut the top off and a section out for the seat/entran...
By: Lordii

Continue Reading »]]>
Tue, 25 Oct 2016 10:09:46 PDT
IoT PiRadio/Alarm using Cayenne. http://www.instructables.com/id/Internet-PiRadioAlarm-Using-Cayenne/
IoT PiRadio/Alarm using Cayenne. - More DIY How To Projects]]> https://cdn.instructables.com/FRF/C1FO/IUOHMZXK/FRFC1FOIUOHMZXK.SQUARE2.jpg https://cdn.instructables.com/FRF/C1FO/IUOHMZXK/FRFC1FOIUOHMZXK.SQUARE.jpg https://cdn.instructables.com/FRF/C1FO/IUOHMZXK/FRFC1FOIUOHMZXK.SMALL.jpg duartejm Hi again!This time I'm here to present you a very simple project, however a very funny one.Two years ago when I have bought my first raspberry pi, I had done an Internet PiRadio where I could listen to some foreign radios.Today I had done a little more! I had removed my LCD showing what radio statio...
By: duartejm

Continue Reading »]]>
Mon, 24 Oct 2016 15:07:05 PDT
Fading LED http://www.instructables.com/id/Fading-LED-1/
Fading LED - More DIY How To Projects]]> https://cdn.instructables.com/FA4/R89J/IUKEPFZH/FA4R89JIUKEPFZH.SQUARE2.jpg https://cdn.instructables.com/FA4/R89J/IUKEPFZH/FA4R89JIUKEPFZH.SQUARE.jpg https://cdn.instructables.com/FA4/R89J/IUKEPFZH/FA4R89JIUKEPFZH.SMALL.jpg Chris Project Hello I'm Christopher Tjia and today I'm gonna show you how to make a fading LED. Watch the video the the video is in my youtube channel Christopher Tjia, link: Buy all of the components The components for thias project are:1pc 9V power supply, for this i'm using a variable bench power supply...
By: Chris Project

Continue Reading »]]>
Sat, 22 Oct 2016 22:01:48 PDT
LED - Tree of Life http://www.instructables.com/id/LED-Tree-of-Life/
LED - Tree of Life - More DIY How To Projects]]> https://cdn.instructables.com/FFQ/0SMD/IUEU426J/FFQ0SMDIUEU426J.SQUARE2.jpg https://cdn.instructables.com/FFQ/0SMD/IUEU426J/FFQ0SMDIUEU426J.SQUARE.jpg https://cdn.instructables.com/FFQ/0SMD/IUEU426J/FFQ0SMDIUEU426J.SMALL.jpg Kredence I've always had a love for LED lights and specifically - LED light fixtures. I had been working with some electrical wiring around the house and had a spare section of wire left over. I folded up the bare wire and was considering different reasons to keep it for future projects. At the same moment, ...
By: Kredence

Continue Reading »]]>
Mon, 17 Oct 2016 22:44:32 PDT
DJ Mixer Using 4Duino-24 http://www.instructables.com/id/DJ-Mixer-Using-4Duino-24/
DJ Mixer Using 4Duino-24 - More DIY How To Projects]]> https://cdn.instructables.com/FQD/GPFL/IU5NM4MQ/FQDGPFLIU5NM4MQ.SQUARE2.jpg https://cdn.instructables.com/FQD/GPFL/IU5NM4MQ/FQDGPFLIU5NM4MQ.SQUARE.jpg https://cdn.instructables.com/FQD/GPFL/IU5NM4MQ/FQDGPFLIU5NM4MQ.SMALL.jpg 4D Systems The 4Duino DJ Mixer is a fun and interactive project similar to a keyboard MIDI Controller that has the ability to play sample beats and songs.Before, DJ and music artist needs to use computers, recording and playback devices before they can mix and play their own customized music. But using this pr...
By: 4D Systems

Continue Reading »]]>
Thu, 13 Oct 2016 21:10:27 PDT