Instructables: exploring - living - bowl - featured Sun, 5 Jul 2015 16:46:42 PDT BLOX v1.01 Porcelain Roses - Nested Bowls
Porcelain Roses - Nested Bowls - More DIY How To Projects]]> Rhonda Chase Design When stacked together, little bowls form a delicate rose. When separated they make lovely dipping or condiment sets. The rose sets are so beautiful and unique they make wonderful presents and perfect wedding gifts. What You Need One of the great things about this project is how little you need. ...
By: Rhonda Chase Design

Continue Reading »]]>
Tue, 16 Jun 2015 16:47:41 PDT
Fruit Bowl
Fruit Bowl - More DIY How To Projects]]> pensa If you're in need of a way to hold fruit, this is the solution for you. Gather the Necessary Materials and Tools Material: 3 lengths .125" Galvanized Steel Wire, Fruit (optional)Tools: Wire Cutters, Soldering Torch, Solder, Clips or Spring Clamp, Magnets, Spray Paint (optional)Time: 1 - 2 Hours S...
By: pensa

Continue Reading »]]>
Fri, 29 May 2015 07:58:17 PDT
Milk top bowl
Milk top bowl - More DIY How To Projects]]> matt.sims.37266 HiThis insturctable will go through how I turn milk bottle tops (and various odd ones) into blanks for working with, mainly for turning but you can work it just like timber so your imagination is your limit :) To start off with you need LOTS, just to be clear here LOTS of milk bottle/coke/fabricsoft...
By: matt.sims.37266

Continue Reading »]]>
Wed, 27 May 2015 05:35:23 PDT
Make a fruit-bowl out of Instamorph
Make a fruit-bowl out of Instamorph - More DIY How To Projects]]> krummrey Using a similar pattern as in my cellphone case I made a fruit bowl using Instamorph.For those not familiar with Instamorph. It's a reusable plastic that turns soft and mold-able when heated and when it cools down it will turn hard again and retain it's shape. There are quite a few projects made wit...
By: krummrey

Continue Reading »]]>
Thu, 21 May 2015 08:01:50 PDT
Leaf Bowl
Leaf Bowl - More DIY How To Projects]]> Ealbinson5 This is a DIY craft for at home decoration. To create your own decorative DIY leaf bowl all you will need is:1 balloon Your choice of leaves A bowl to hold your balloon in place Paint brush or foam brush Mod Podge (matte finish) Scissors Cut the stems of your leaves The first thing that you nee...
By: Ealbinson5

Continue Reading »]]>
Fri, 15 May 2015 06:16:18 PDT
Geometric Wood & Copper Fruit Bowl
Geometric Wood & Copper Fruit Bowl - More DIY How To Projects]]> Makery This is a quick and easy way to elevate a plain wooden fruit bowl and bring it bang up to date with geometric copper accents You'll need a wooden bowl, masking tape and copper spray paint Mark out your design with masking tape. I went for simplicity with retro looking, nesting triangles. You...
By: Makery

Continue Reading »]]>
Wed, 4 Mar 2015 10:39:57 PST
Sparky: The $3 Micro Fish Tank Filter
Sparky: The $3 Micro Fish Tank Filter - More DIY How To Projects]]> imthemaker Meet Sparky, a micro filter for fish tanks that only costs $3. It is so simple to make and it is the perfect size for a betta tank or another small aquarium. If you want to use it with a larger tank, you can just double up!Why do you need a Filter?A filter is absolutely essential for any fish tank! ...
By: imthemaker

Continue Reading »]]>
Wed, 21 Jan 2015 12:52:24 PST
Sea Glass Mosaic Bowl
Sea Glass Mosaic Bowl - More DIY How To Projects]]> creativesocialworker This is a tutorial for a sea glass mosaic bowl that I made as a Christmas gift.Supplies Bowl (This one was painted at a paint your own pottery studio)Sea glassGlue (hot glue or guerrilla glue)Grout (unsanded works best, but I used sanded for this piece) or plaster of parisSpongeHigh Gloss Stone/Tile...
By: creativesocialworker

Continue Reading »]]>
Sat, 20 Dec 2014 16:49:48 PST
Making a Metal Bowl from the Battleship USS Texas BB-35
Making a Metal Bowl from the Battleship USS Texas BB-35 - More DIY How To Projects]]> Das_Wookie I recently was able to get started with a program with the Battleship Texas Foundation for making art from materials removed from the ship as part of preservation of the ship. The steel I was given is reclaimed from the engine super structure and was laid in 1911 (that's when the keel was laid along...
By: Das_Wookie

Continue Reading »]]>
Thu, 18 Dec 2014 16:53:17 PST
DIY Perler Bead Bowl
DIY Perler Bead Bowl - More DIY How To Projects]]> jujubee31 This is a super easy craft to make and it's fun to do with your kids! (Be careful doing this with small children may be a chocking hazard) You can use this for organization or for looks! Gather Your Materials •vegetable oil•perler beads •oven safe bowl you want the final product to look like •ov...
By: jujubee31

Continue Reading »]]>
Fri, 28 Nov 2014 18:20:34 PST
Throwing a Pot 101
Throwing a Pot 101 - More DIY How To Projects]]> SLOMakerSpace These Instructions will show you the step by step process for basic throwing. Most things you make on a pottery wheel start with the same basic instructions no matter what you are trying to make. Once you get the basic steps down you can start experimenting with more complex forms and larger amounts...
By: SLOMakerSpace

Continue Reading »]]>
Wed, 22 Oct 2014 13:42:17 PDT
Project Yolk
Project Yolk - More DIY How To Projects]]> Studio Egg The act of cooking and preparing food brings with it many subtleties and nuances. From finding the perfect way to pepper a salad to the ultimate technique in which to scramble eggs – a long debated issue between many cooks. This mass of personal preferences combined with the countless tools and gadg...
By: Studio Egg

Continue Reading »]]>
Mon, 22 Sep 2014 12:57:54 PDT
Yarn Bowl
Yarn Bowl - More DIY How To Projects]]> VivianHHLin Hi! We're a team of five industrial design students (Vincent James, Margaret Royena, Natalie Tillen, Robin Stethem, Vivian Lin) from Emily Carr University of Art + Design, located in Vancouver, Canada. We were tasked in one of our design classes to research and explore the idea of the role of a desi...
By: VivianHHLin

Continue Reading »]]>
Sun, 21 Sep 2014 19:03:41 PDT
Mini Stone Bowl
Mini Stone Bowl - More DIY How To Projects]]> Dark Bottle A stone bowl carved from orange alabaster. The Tools Tools for hand held carving: 1. Face mask2. Small hammer3. Leather gloves4. Small piece of Alabaster Stone (orange alabaster in picture)5. Needle pick6. Coarse and fine rasps & files (small to medium in size)7. Mini (watch) screw drivers (used ...
By: Dark Bottle

Continue Reading »]]>
Wed, 7 May 2014 17:00:41 PDT
How to Make a Ceramic Mold from a 3-D Printed Object
How to Make a Ceramic Mold from a 3-D Printed Object - More DIY How To Projects]]> bmkenned For a medium like clay getting rigid angles and perfect curves is a nightmare. However 3-D printing and making a mold opens up a whole new world of possible shapes and forms.This mold will be for a bowl, I know it looks like a big hunk of plastic right nowMade at TechShop S...
By: bmkenned

Continue Reading »]]>
Mon, 17 Mar 2014 22:47:27 PDT
EASY & INEXPENSIVE DIY Snowballs & Snow Covered Pine Cones
EASY & INEXPENSIVE DIY Snowballs & Snow Covered Pine Cones - More DIY How To Projects]]> ryeomans1 INEXPENSIVE, SIMPLE, FAST, KID FRIENDLY & AWESOME RESULTS are some of the words that come to mind about THIS project! After all the decorations have been put away for another year, the house seems a little bare and empty.  Here's a project that brings the cold, snowy winter weather inside and helps...
By: ryeomans1

Continue Reading »]]>
Tue, 28 Jan 2014 09:44:37 PST
Make a Halloween Pumpkin Punch Bowl
Make a Halloween Pumpkin Punch Bowl - More DIY How To Projects]]> PumpkinProject13 A Fun and Easy Jack O’Lantern Punch Bowl for Halloween Festivities Materials Needed: 1 Medium – Large Pumpkin 1 Large Serrated Knife* 1 Pumpkin Scoop** 1 Pumpkin Carving Tool*** 1 Spigot (with washers and nut) Paper Towels Colored Permanent Markers or Craft Paints Newspaper or Plastic Bag     ...
By: PumpkinProject13

Continue Reading »]]>
Tue, 22 Oct 2013 19:27:46 PDT
Dragon Bowl: Inverted Watermelon
Dragon Bowl: Inverted Watermelon - More DIY How To Projects]]> martinbolton For a long long time people have created functional containers from fruit/vegetable skins. I aimed to do the same from the skin of a watermelon instead of being discarded or composted. This is a product made through the experimentation with different materials and processes, which is always interes...
By: martinbolton

Continue Reading »]]>
Wed, 5 Jun 2013 08:16:15 PDT
Rolled Magazine Bowl
Rolled Magazine Bowl - More DIY How To Projects]]> ofm11 1- What did you make? This bowl is built from rolled magazine strips! I used old magazines because it's a cheap, easy, and colorful material. 2- How did you make it?  I decided to build this out of sheer boredom while watching a long movie with my sister. The idea just popped into my mind! I created...
By: ofm11

Continue Reading »]]>
Sat, 13 Apr 2013 13:31:44 PDT
Bamboo Yarn Bowl
Bamboo Yarn Bowl - More DIY How To Projects]]> dtextor So your girlfriend likes knitting things and x-mas is coming soon? Making her a beautiful bamboo yarn bowl that keeps the yarn from getting entangled and unrolls the yarn would be a nice option. -------------------------------------- Materials needed - wooden bowl (I used a bamboo bowl from Ikea)...
By: dtextor

Continue Reading »]]>
Mon, 17 Dec 2012 12:11:37 PST
Decorating with Fall Leaves
Decorating with Fall Leaves - More DIY How To Projects]]> kcli Fall is a beautiful season and while many autumn leaves find their way into my home, their fragile nature makes it difficult to extend that beauty for more than a week.  For years I've wanted to create something permanent that gives the appearance of the colorful, scattered leaves for my Thanksgivin...
By: kcli

Continue Reading »]]>
Fri, 30 Nov 2012 11:21:13 PST
Newspaper Vase- Twist Weave
Newspaper Vase- Twist Weave - More DIY How To Projects]]> shazni Back here in Sri Lanka we encourage young girls with no income or education or orphans to start small business at home while looking after their kids. One of the ways we have found is newspaper's cheap and very versatile. It's the same as basket weaving...only cheaper as we use newspape...
By: shazni

Continue Reading »]]>
Wed, 10 Oct 2012 07:26:31 PDT
Smash and Grab Bowl_Cast Concrete + Glass. martinbolton This is a bowl cast from concrete, utilising glass fragments from one of the infamous ‘smash and grabs’. I am not sure if this is an international term, of if it is mostly understood in my hometown Johannesburg and the rest of South Africa. I have featured this on my website, but I know that Instruc...
By: martinbolton

Continue Reading »]]>
Mon, 4 Jun 2012 12:07:35 PDT
Stacked Laser Cut Bowls
Stacked Laser Cut Bowls - More DIY How To Projects]]> tinkerology This instructable will show you how to design, laser cut, and build a stacked bowl quickly and easily.  These bowls waste very little material during manufacturing. They can be made from a variety of matrials like: plywood, solid wood, and acrylic. The instructions assume that you have CorelDraw ava...
By: tinkerology

Continue Reading »]]>
Mon, 4 Jun 2012 01:16:50 PDT
Recycled Magazine Pages Bowl
Recycled Magazine Pages Bowl - More DIY How To Projects]]> DeandrasCrafts One rainy Saturday, my kids were getting sick of watching TV and my 6-year old son asked me if we could make a craft. I had recently gone through a few of my craft magazines and stumbled on a very brief set of instructions on how to make an “earth day magazine bowl.”  The original design for this w...
By: DeandrasCrafts

Continue Reading »]]>
Thu, 19 Apr 2012 11:42:21 PDT
How to Recycle a Coconut Shell into a Bowl
How to Recycle a Coconut Shell into a Bowl - More DIY How To Projects]]> marzycielka This is my (very similar) take on goldenbacon's coconut bowl tutorial, the main differences being that I used waterproofing lacquer I made myself rather than a spray-on waterproofer, and that I went into far more detail about each of the steps. I also adapted a trick for getting the meat out of the ...
By: marzycielka

Continue Reading »]]>
Thu, 22 Mar 2012 22:59:13 PDT
Decorative Candy Bowl
Decorative Candy Bowl - More DIY How To Projects]]> kaytea27 This will be the end product. A cute Valentine's inspired candy bowl.  You will need: -paper towel -paper -tissue paper -pieces of candy (I used Hershey Kisses) -assorted colors of beads (pink, white, red) [different colors can be used depending on what it is for. (ex. St. Patty's day, Christmas, ec...
By: kaytea27

Continue Reading »]]>
Sat, 18 Feb 2012 17:40:04 PST
Washing Machine Door Salad Bowl. bertus52x11 There are many good parts in old washing machines. One of them is the Door. This I'ble will show you how to turn a Washing Machine Door into a Salad Bowl. Step 1: Determine the type of screws or bolts in the door and disassemble it. Step 2: Rip off the hard plastic cover. Usually a screwdriver and ...
By: bertus52x11

Continue Reading »]]>
Fri, 13 Jan 2012 00:22:56 PST
Dog Cat recycling water bowl
Dog Cat recycling water bowl - More DIY How To Projects]]> jmsdo We have ALOT of indoor dwelling animals.  Filling water bowls all day is time consuming.  We have shopped for the fresh flowing commercial pet water fountains and found them to be expensive, low volume and poor quality.  I came up with a high volume no frills alternative.  Extremely easy to put toge...
By: jmsdo

Continue Reading »]]>
Mon, 19 Dec 2011 09:53:54 PST
Bowl Pet House
Bowl Pet House - More DIY How To Projects]]> danjovic This instructable shows how to quickly make a very comfortable house for your small pets using cheap materials. I don't know who is the original author of the idea but it is a very ingenious and creative way of using common plastic ware, and it is also so easy to do that you can do yours just lookin...
By: danjovic

Continue Reading »]]>
Mon, 14 Nov 2011 12:52:12 PST
Triangular Paper Fruit Bowl
Triangular Paper Fruit Bowl - More DIY How To Projects]]> Albin Goossen DIY fruit bowl made out of old magazines! Step 1. Materials Requirements: -Old magazines -Glue stick -Glue pistol Step 2. Making the strips Step 2: Tear a page from a magazine. Cut off a slip of paper of about 3 centimetres. Fold the slip of paper three times so that you obtain a folded sli...
By: Albin Goossen

Continue Reading »]]>
Thu, 31 Mar 2011 11:22:50 PDT
Recycled Paper Bowl
Recycled Paper Bowl - More DIY How To Projects]]> jnifrwebb I made mine using mostly recycled crayon wrappers, but any paper will work, junk mail, magazines, etc. All you need is: water scrap paper  old blender tape plastic wrap or plastic grocery bag plastic or glass bowl a towel, or felt squares glitter (optional) Soak Paper Everyone is making recycled...
By: jnifrwebb

Continue Reading »]]>
Tue, 21 Dec 2010 12:46:33 PST
Screw Bowl - A Bowl Made From Screws
Screw Bowl - A Bowl Made From Screws - More DIY How To Projects]]> Toglefritz Do you have extra screws laying around your shop? Would you like to have a very stylish bowl to impress your friends/family at parties or other social gatherings? Are you bored? If you answered yes to any of the above questions, this Instructable is for you.  Watch the video on Step 2 or read the...
By: Toglefritz

Continue Reading »]]>
Thu, 7 Oct 2010 10:01:44 PDT
How To: Coconut Bowl
How To: Coconut Bowl - More DIY How To Projects]]> goldenbacon  In this Instructable, I will show you how to make a coconut bowl 1: Things you will need Coconut $2 Nail  Hammer Bowl Slightly Smaller Than Coconut Sharpie A saw of some-sort, I used a hacksaw Chisel  Good Knife 2: Draining Coconut  *Be Careful Not To Spill Coconut Then, After You Have Made...
By: goldenbacon

Continue Reading »]]>
Tue, 23 Feb 2010 17:16:38 PST
Cupcake in a Teacup Pincushion (recycled/upcycled/repurposed!)
Cupcake in a Teacup Pincushion (recycled/upcycled/repurposed!) - More DIY How To Projects]]> antelucandaisy This instructable provides directions to use recycled wool felt with a neat vintage container (soup bowl or teacup) to create a nice weighty pincushion. Just in time for mother's day, a tutorial that uses recycled, upcycled, and repurposed materials!I made the teacup pincushion below for a swap, and...
By: antelucandaisy

Continue Reading »]]>
Mon, 20 Apr 2009 19:12:48 PDT
Bamboo Fruit Bowl
Bamboo Fruit Bowl - More DIY How To Projects]]> rsablosky This beautiful bowl is made of 20 layers of laser-cut bamboo tied together with copper wire.I am posting it as an entry for the "Epilog Challenge". It is a "green" product in that the design makes minimal use of materials. Laser cutting I had the bowl laser-cut by Ponoko out of a single sheet of ...
By: rsablosky

Continue Reading »]]>
Sat, 4 Apr 2009 18:03:42 PDT
How to Turn Junk Mail and Paper into Very Nice Bowls
How to Turn Junk Mail and Paper into Very Nice Bowls - More DIY How To Projects]]> laminterious I get alot of old paper, from magazines to junk mail to old telephone directories. I also work at a job where I throw out (or am supposed to, but instead I make bowls!) alot of paper. I mean ALOT. In the summer, I easily can print 2k pages of paper and throw away about that many. Each Night.Yea, tha...
By: laminterious

Continue Reading »]]>
Tue, 6 May 2008 16:22:49 PDT
Etched Minty Valentines Candy Box
Etched Minty Valentines Candy Box - More DIY How To Projects]]> photozz Or.. a good demonstration of why throwing a radio into the bathtub will kill you. I'll explain later. Speaking of killing you, as we are using water and electricity here, please be supper-duper cautious. I can't be held responsible for burned fingers, house fires, dead cats or any combination thereo...
By: photozz

Continue Reading »]]>
Mon, 29 Jan 2007 13:28:04 PST
Record Bowls
Record Bowls - More DIY How To Projects]]> fungus amungus A record bowl is a classic project where you can reuse an outdated item: a vinyl record. With CDs even on their way out it's safe to say that many records can be safely molded into something new without the world losing any of its music.In this Instructable, I will be showing off two versions of thi...
By: fungus amungus

Continue Reading »]]>
Tue, 12 Dec 2006 23:08:05 PST
How to make a RFID pet food access control system
How to make a RFID pet food access control system - More DIY How To Projects]]> mlarsen In this instructable I will explain how to make a simple RFID pet food access control system. This system uses a stand-alone RFID system that can be purchased either pre-assembled or in kit form if you desire to do the soldering yourself, and also wish to save a few dollars in the process.The reason...
By: mlarsen

Continue Reading »]]>
Sun, 2 Sep 2007 14:35:05 PDT