http://www.instructables.com Wed, 19 Jun 2013 14:52:33 PDT BLOX v1.01 http://www.instructables.com/id/Cute-Bead-Pendant-in-a-Jiffy/
Cute Bead Pendant in a Jiffy - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FUQ/IEXJ/HHTE11L1/FUQIEXJHHTE11L1.SQUARE2.jpg http://www.instructables.com/files/deriv/FUQ/IEXJ/HHTE11L1/FUQIEXJHHTE11L1.SQUARE.jpg http://www.instructables.com/files/deriv/FUQ/IEXJ/HHTE11L1/FUQIEXJHHTE11L1.SMALL.jpg andromedablack Hi y'all! I’ll be showing you how to make a cute beaded pendant. It’s pretty easy to make this adorable little pendant in just a few minutes. So here we go. Hope you like it… Things you'll need:  • Five round beads (any color you like) • Plastic thread (I took a 15cm  long thread for this pendan...
By: andromedablack

Continue Reading »]]> Sun, 16 Jun 2013 13:54:35 PDT http://www.instructables.com/id/Shrinky-Dinks-and-Doming-Resin/
Jewellery with Shrinky Dinks and Doming Resin - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FH2/6F2Y/HHMI941G/FH26F2YHHMI941G.SQUARE2.jpg http://www.instructables.com/files/deriv/FH2/6F2Y/HHMI941G/FH26F2YHHMI941G.SQUARE.jpg http://www.instructables.com/files/deriv/FH2/6F2Y/HHMI941G/FH26F2YHHMI941G.SMALL.jpg organgrinder This is a guide to making dhrinky dinks and using doming resin to turning the shrinkies into earrings and brooches.  There are two types of Shrink Film to choose from; the one your print on (with your inkjet) and the one you draw on (with permanent markers and colouring pencils).  I use Shrink Plas...
By: organgrinder

Continue Reading »]]> Thu, 6 Jun 2013 02:28:14 PDT http://www.instructables.com/id/My-Bling-Bling-Copper-Coin-Bracelet/
My Bling Bling Copper Coin Bracelet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FVB/2K7Q/HH11QN3V/FVB2K7QHH11QN3V.SQUARE2.jpg http://www.instructables.com/files/deriv/FVB/2K7Q/HH11QN3V/FVB2K7QHH11QN3V.SQUARE.jpg http://www.instructables.com/files/deriv/FVB/2K7Q/HH11QN3V/FVB2K7QHH11QN3V.SMALL.jpg MeenaChang Hi All. Quick Step by Step:) You Will Need 1. Some old copper coins or anything metal that is smooth and round. I chose a few pennies and one 2pence coin in which I had lying around. Also some stretch elastic cut to the size of the wrist it is intended for. Rhinestones Glue Strong stick gl...
By: MeenaChang

Continue Reading »]]> Thu, 23 May 2013 03:05:11 PDT http://www.instructables.com/id/Making-a-Victorian-inspired-necklace/
Making a Victorian-inspired necklace - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4U/44H7/HFSHFSRE/F4U44H7HFSHFSRE.SQUARE2.jpg http://www.instructables.com/files/deriv/F4U/44H7/HFSHFSRE/F4U44H7HFSHFSRE.SQUARE.jpg http://www.instructables.com/files/deriv/F4U/44H7/HFSHFSRE/F4U44H7HFSHFSRE.SMALL.jpg partemis I’ve always had a soft spot for Victorian jewellery. There’s something about the materials they use and the lines of the jewellery that make me feel like a true Lady while in costume. The unfortunate thing, however, is that jewellery from this era can be both stupidly expensive and hard to come by. ...
By: partemis

Continue Reading »]]> Tue, 30 Apr 2013 21:12:20 PDT http://www.instructables.com/id/Crochet-a-Queensday-ring/
Crochet a Queensday ring - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FJC/C8CB/HFPTI8VX/FJCC8CBHFPTI8VX.SQUARE2.jpg http://www.instructables.com/files/deriv/FJC/C8CB/HFPTI8VX/FJCC8CBHFPTI8VX.SQUARE.jpg http://www.instructables.com/files/deriv/FJC/C8CB/HFPTI8VX/FJCC8CBHFPTI8VX.SMALL.jpg knitbitch What’s more Dutch for Queensday than a king or queen crown? That’s why I (the Knitbitch) decided to crochet a ring with a crown on-top. The ring itself is not too difficult, it’s placing the ring on-top without interruption the work that’s challenging. If you find that too difficult you can crochet ...
By: knitbitch

Continue Reading »]]> Sun, 28 Apr 2013 07:15:00 PDT http://www.instructables.com/id/Reversible-quilling-Jewellery/
Reversible quilling Jewellery - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4V/091H/HFD1FG8T/F4V091HHFD1FG8T.SQUARE2.jpg http://www.instructables.com/files/deriv/F4V/091H/HFD1FG8T/F4V091HHFD1FG8T.SQUARE.jpg http://www.instructables.com/files/deriv/F4V/091H/HFD1FG8T/F4V091HHFD1FG8T.SMALL.jpg artworker My wife wanted to create a jewellery that can have multiple use. So she thought of some thing that can be reused just by flipping and using. She made these jeweleries using quilling papers. The necklace is reversible, but the ear rings are just as they are. Follow the steps to create one of your own...
By: artworker

Continue Reading »]]> Wed, 17 Apr 2013 00:46:00 PDT http://www.instructables.com/id/Introduction-45/
Lasercut a "lace" perspex bracelet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F11/DKAW/HFBK96IZ/F11DKAWHFBK96IZ.SQUARE2.jpg http://www.instructables.com/files/deriv/F11/DKAW/HFBK96IZ/F11DKAWHFBK96IZ.SQUARE.jpg http://www.instructables.com/files/deriv/F11/DKAW/HFBK96IZ/F11DKAWHFBK96IZ.SMALL.jpg knitbitch About time that I get this one shared properly, not really like anything else that you have seen from the Knitbitch so far, but I also like to experiment with these new crafting techniques. A couple of years ago I joined the hypercraft masterclass in the Fablab (de Waag) in Amsterdam. I used a patte...
By: knitbitch

Continue Reading »]]> Wed, 10 Apr 2013 12:21:01 PDT http://www.instructables.com/id/Easy-jewellery-display-and-organsier/ http://www.instructables.com/files/deriv/FFP/I146/HERLZR61/FFPI146HERLZR61.SQUARE2.jpg http://www.instructables.com/files/deriv/FFP/I146/HERLZR61/FFPI146HERLZR61.SQUARE.jpg http://www.instructables.com/files/deriv/FFP/I146/HERLZR61/FFPI146HERLZR61.SMALL.jpg Nothing Light If like my girlfriend, you have a lot of earrings and Necklaces, then here is an easy way of not losing them and making them look rather organised.  Providing you have no problem with adding some holes to a shelf unit then you'll be ok.  This can easily be done with any type of unit. But the one i...
By: Nothing Light

Continue Reading »]]> Wed, 27 Mar 2013 07:28:49 PDT http://www.instructables.com/id/Duct-Tape-Feather-Bow-Necklaces/ http://www.instructables.com/files/deriv/F2L/VU5B/HD4VOX35/F2LVU5BHD4VOX35.SQUARE2.jpg http://www.instructables.com/files/deriv/F2L/VU5B/HD4VOX35/F2LVU5BHD4VOX35.SQUARE.jpg http://www.instructables.com/files/deriv/F2L/VU5B/HD4VOX35/F2LVU5BHD4VOX35.SMALL.jpg ebrown19 These are a few examples of ways to make necklaces with duct tape! All you need is: -Duct Tape -Scissors / Stanley knife -Necklace -Pliers 1. To make a bow you simply take a strip 2x as long as you want the bow to be and fold it back on itself, placing the sticky sides together. Press them togeth...
By: ebrown19

Continue Reading »]]> Sun, 17 Feb 2013 13:03:26 PST http://www.instructables.com/id/DIY-5-Minute-Chain-Anklet/
DIY 5 Minute Chain Anklet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FI3/XG5V/H9X3IPK0/FI3XG5VH9X3IPK0.SQUARE2.jpg http://www.instructables.com/files/deriv/FI3/XG5V/H9X3IPK0/FI3XG5VH9X3IPK0.SQUARE.jpg http://www.instructables.com/files/deriv/FI3/XG5V/H9X3IPK0/FI3XG5VH9X3IPK0.SMALL.jpg christine_gierer This chain anklet can be made in 5 minutes flat.  (I published this on my website too where you can get more information about variations, supplies and such.) Gather Your Tools and Supplies You'll need  A pair of jeweler's chain nose pliers A pair of flat nose pliers A lobster clasp ...
By: christine_gierer

Continue Reading »]]> Mon, 26 Nov 2012 08:31:14 PST http://www.instructables.com/id/Basic-chain-making-Tutorial-Round/
Basic chain making Tutorial: Round - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAN/NMOC/H9T4F8M4/FANNMOCH9T4F8M4.SQUARE2.jpg http://www.instructables.com/files/deriv/FAN/NMOC/H9T4F8M4/FANNMOCH9T4F8M4.SQUARE.jpg http://www.instructables.com/files/deriv/FAN/NMOC/H9T4F8M4/FANNMOCH9T4F8M4.SMALL.jpg creatinglinus The third project my students make is chain. It's usually the project they look forward to the least. But, making chain is an excellent way to improve soldering skills and gain confidence with the torch. Often students think of chain as boring, I disagree; a well designed chain can greatly enhance a...
By: creatinglinus

Continue Reading »]]> Sat, 24 Nov 2012 20:23:21 PST http://www.instructables.com/id/Solder-Constructed-Framed-Pendant/
Solder Constructed Framed Pendant - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FR5/Z6RZ/H8RVLOBN/FR5Z6RZH8RVLOBN.SQUARE2.jpg http://www.instructables.com/files/deriv/FR5/Z6RZ/H8RVLOBN/FR5Z6RZH8RVLOBN.SQUARE.jpg http://www.instructables.com/files/deriv/FR5/Z6RZ/H8RVLOBN/FR5Z6RZH8RVLOBN.SMALL.jpg creatinglinus In this "in the classroom" tutorial brought to you by Creating Linus Jewellery, learn how to solder construct a Sterling Silver Frame around a Roller Printed image. Tips and Techniques include:  how to score and bend crisp 90 degree corners, File fit an insert, Bail making, how to make emery tools a...
By: creatinglinus

Continue Reading »]]> Tue, 30 Oct 2012 15:50:10 PDT http://www.instructables.com/id/DIY-Necklace-Holder-Display-Easy/ http://www.instructables.com/files/deriv/FTD/BKUW/H8RK8ZRJ/FTDBKUWH8RK8ZRJ.SQUARE2.jpg http://www.instructables.com/files/deriv/FTD/BKUW/H8RK8ZRJ/FTDBKUWH8RK8ZRJ.SQUARE.jpg http://www.instructables.com/files/deriv/FTD/BKUW/H8RK8ZRJ/FTDBKUWH8RK8ZRJ.SMALL.jpg AshTalksALot How to make a super cute and super easy necklace display/ holder Materials Needed: -Canvas Board (Can be replaced with wood or sturdy piece of cardboard    -found  mine at dollar stor -Thumbtacks/ push-pin -Thick Cardboard -Scrapbook paper and/or paint to decorate the Canvas -Fabric (I used part of...
By: AshTalksALot

Continue Reading »]]> Mon, 29 Oct 2012 10:17:48 PDT http://www.instructables.com/id/A-simple-Sterling-Silver-Band-Ring/
A simple Sterling Silver Band Ring - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4G/12CI/H8QEWYEZ/F4G12CIH8QEWYEZ.SQUARE2.jpg http://www.instructables.com/files/deriv/F4G/12CI/H8QEWYEZ/F4G12CIH8QEWYEZ.SQUARE.jpg http://www.instructables.com/files/deriv/F4G/12CI/H8QEWYEZ/F4G12CIH8QEWYEZ.SMALL.jpg creatinglinus The first piece of solder constructed jewellery I made was a simple sterling silver band ring in college. It is also the first project I give to my beginner students. It touches on most of the basics of solder constructed jewellery making: shaping, filing, sawing, fitting joints, soldering and finis...
By: creatinglinus

Continue Reading »]]> Fri, 26 Oct 2012 20:41:06 PDT http://www.instructables.com/id/Roller-Printing-Basics/
Roller Printing Basics - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FZQ/ZEVM/H8RK8DK2/FZQZEVMH8RK8DK2.SQUARE2.jpg http://www.instructables.com/files/deriv/FZQ/ZEVM/H8RK8DK2/FZQZEVMH8RK8DK2.SQUARE.jpg http://www.instructables.com/files/deriv/FZQ/ZEVM/H8RK8DK2/FZQZEVMH8RK8DK2.SMALL.jpg creatinglinus Roller Printing is a simple and quick way to add texture to your work. The process is fairly simple: all one needs is  a Rolling Mill, a piece of annealed metal and a Die. Choosing a Die (some samples of my favorite Dies) A "Die" is what makes the imprint. This could be any number of things: Pape...
By: creatinglinus

Continue Reading »]]> Fri, 26 Oct 2012 17:30:37 PDT http://www.instructables.com/id/Beginners-Sawing-and-Piercing-Project/
Beginners Sawing and Piercing Project - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FV7/LY8F/H8QEWVVG/FV7LY8FH8QEWVVG.SQUARE2.jpg http://www.instructables.com/files/deriv/FV7/LY8F/H8QEWVVG/FV7LY8FH8QEWVVG.SQUARE.jpg http://www.instructables.com/files/deriv/FV7/LY8F/H8QEWVVG/FV7LY8FH8QEWVVG.SMALL.jpg creatinglinus This simple Sawing and Piercing project is perfect for the beginner. I've designed a simple leaf pattern but this project can be used with any sawing and piercing design that emphasizes negative space. Although I roller printed the top plate, you could hammer texture or leave yours polished. I used ...
By: creatinglinus

Continue Reading »]]> Fri, 26 Oct 2012 11:51:26 PDT http://www.instructables.com/id/Jewellery-display-roll-made-with-every-day-items/
Jewellery display roll made with every day items. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FEC/RLO2/H673C75N/FECRLO2H673C75N.SQUARE2.jpg http://www.instructables.com/files/deriv/FEC/RLO2/H673C75N/FECRLO2H673C75N.SQUARE.jpg http://www.instructables.com/files/deriv/FEC/RLO2/H673C75N/FECRLO2H673C75N.SMALL.jpg allthedeadears This is a simple and quick way to make a handy and attractive holder for your jewellery, whether it be for displays on a stall or for your own bedroom shelf. It saves space and displays your jewellery beautifully! Plus its so easy to make! You will need... A cardboard roll (any size) Can be from ...
By: allthedeadears

Continue Reading »]]> Thu, 23 Aug 2012 16:49:44 PDT http://www.instructables.com/id/Jewelery-Roll/
Jewellery Roll - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFU/QPH2/H5JVXMOU/FFUQPH2H5JVXMOU.SQUARE2.jpg http://www.instructables.com/files/deriv/FFU/QPH2/H5JVXMOU/FFUQPH2H5JVXMOU.SQUARE.jpg http://www.instructables.com/files/deriv/FFU/QPH2/H5JVXMOU/FFUQPH2H5JVXMOU.SMALL.jpg allisondube I love my jewelery, so of course I want to take it with me when travelling but still keep it nice and safe. I scoured local shops and big-box stores only to come up empty-handed, before heading over to etsy. While there were tons of great options, nothing was a perfect fit for me. So, armed with lim...
By: allisondube

Continue Reading »]]> Thu, 9 Aug 2012 14:25:51 PDT http://www.instructables.com/id/Waveform-Necklace-Bracelet/
Waveform Necklace & Bracelet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FTQ/DZVS/H2ULRBT6/FTQDZVSH2ULRBT6.SQUARE2.jpg http://www.instructables.com/files/deriv/FTQ/DZVS/H2ULRBT6/FTQDZVSH2ULRBT6.SQUARE.jpg http://www.instructables.com/files/deriv/FTQ/DZVS/H2ULRBT6/FTQDZVSH2ULRBT6.SMALL.jpg bzabiz Get an unique necklace or bracelet, by recording your voice! The design of this necklace is generated from any kind of audio sample, its shape represents the audios waveform. Send a love message, record the first words of your child, use the hook of your favourite song - it's up to you. Check my we...
By: bzabiz

Continue Reading »]]> Thu, 31 May 2012 18:26:11 PDT http://www.instructables.com/id/Laser-Cut-Layered-Flower-Necklace/
Laser Cut Layered Flower Necklace - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FAO/NNDR/H2TIFXUB/FAONNDRH2TIFXUB.SQUARE2.jpg http://www.instructables.com/files/deriv/FAO/NNDR/H2TIFXUB/FAONNDRH2TIFXUB.SQUARE.jpg http://www.instructables.com/files/deriv/FAO/NNDR/H2TIFXUB/FAONNDRH2TIFXUB.SMALL.jpg littlebiglaser We love playing with different materials on our laser cutter, and we really wanted to show that you can create a natural beauty with a CNC laser cutter that is so precise. For something so easily produced it has a lovely hand crafted feel and everything we used was recycled from old clothes that we...
By: littlebiglaser

Continue Reading »]]> Wed, 30 May 2012 13:02:02 PDT http://www.instructables.com/id/cluster-ring-earrings-made-from-broken-bulbs/ http://www.instructables.com/files/deriv/FVT/1W69/H1JUHRVT/FVT1W69H1JUHRVT.SQUARE2.jpg http://www.instructables.com/files/deriv/FVT/1W69/H1JUHRVT/FVT1W69H1JUHRVT.SQUARE.jpg http://www.instructables.com/files/deriv/FVT/1W69/H1JUHRVT/FVT1W69H1JUHRVT.SMALL.jpg HarrietW these are really easy and quick to make . ____Ring____ - twist two of the bulbs together by their wires - keep adding and twisting in more bulbs until you've formed a cluster - twist some of the wires at the back around a plain ring ___Earrings____ - you could buy some earing posts but i just to...
By: HarrietW

Continue Reading »]]> Mon, 7 May 2012 11:24:46 PDT http://www.instructables.com/id/How-to-make-a-jig-for-speedy-earwires/
How to make a jig for speedy earwires - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FO2/9RER/H0OJ5UWI/FO29RERH0OJ5UWI.SQUARE2.jpg http://www.instructables.com/files/deriv/FO2/9RER/H0OJ5UWI/FO29RERH0OJ5UWI.SQUARE.jpg http://www.instructables.com/files/deriv/FO2/9RER/H0OJ5UWI/FO29RERH0OJ5UWI.SMALL.jpg Yorkshire Lass This I'ble shows how to make a simple wooden jig that will allow you to turn out earwires in 3 different styles, rapidly and with no trouble making pairs that match.  It suits 0.8mm to 1mm diameter wire.  It can be made out of bits and bobs you probably have lying around in your garage at zero cost....
By: Yorkshire Lass

Continue Reading »]]> Mon, 16 Apr 2012 11:57:37 PDT http://www.instructables.com/id/Laser-cut-acrylic-jewellery-makingselling/
Laser-cut acrylic jewellery (making+selling) - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F5J/0DY1/GZPBMCCU/F5J0DY1GZPBMCCU.SQUARE2.jpg http://www.instructables.com/files/deriv/F5J/0DY1/GZPBMCCU/F5J0DY1GZPBMCCU.SQUARE.jpg http://www.instructables.com/files/deriv/F5J/0DY1/GZPBMCCU/F5J0DY1GZPBMCCU.SMALL.jpg fatboy106 A group of students at our school decided to take part in an extracurricular activity, in which we were to effectively set up and run a business. This activity is run in the UK by Young Enterprise,  the UK's largest business and enterprise education charity. Learning Objective: Observe the practice...
By: fatboy106

Continue Reading »]]> Sun, 18 Mar 2012 06:09:58 PDT http://www.instructables.com/id/Beer-Bangles/
Beer Bangles - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F2B/CUVG/GZPZOE0T/F2BCUVGGZPZOE0T.SQUARE2.jpg http://www.instructables.com/files/deriv/F2B/CUVG/GZPZOE0T/F2BCUVGGZPZOE0T.SQUARE.jpg http://www.instructables.com/files/deriv/F2B/CUVG/GZPZOE0T/F2BCUVGGZPZOE0T.SMALL.jpg killerjackalope Like Beer? Wear bangles, bracelets or bits and bobs?  Time for some booze based beautification of your wrists... Or y'know just being a trashy wee bizzum...  This one was definitely a "lets see if this works" plan... The result fits in well with my weird collection of wrist junk and other adornmen...
By: killerjackalope

Continue Reading »]]> Wed, 14 Mar 2012 09:39:22 PDT http://www.instructables.com/id/2-colour-buttons/
2 colour buttons - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FZ9/NPRF/GYWSZ5I9/FZ9NPRFGYWSZ5I9.SQUARE2.jpg http://www.instructables.com/files/deriv/FZ9/NPRF/GYWSZ5I9/FZ9NPRFGYWSZ5I9.SQUARE.jpg http://www.instructables.com/files/deriv/FZ9/NPRF/GYWSZ5I9/FZ9NPRFGYWSZ5I9.SMALL.jpg lucylollipop Yum, buttons. I do love buttons. Boxes full of them, to run through my fingers. Especially pretty ones, to replace boring ones on clothing, turn into jewellery, decorate accessories with, or just look at! However, sometimes, you just can't find the button you want - thats where these come in! The o...
By: lucylollipop

Continue Reading »]]> Tue, 21 Feb 2012 12:39:59 PST http://www.instructables.com/id/Metal-Casting/
Metal Casting - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FRR/T0YO/GYTY1HWL/FRRT0YOGYTY1HWL.SQUARE2.jpg http://www.instructables.com/files/deriv/FRR/T0YO/GYTY1HWL/FRRT0YOGYTY1HWL.SQUARE.jpg http://www.instructables.com/files/deriv/FRR/T0YO/GYTY1HWL/FRRT0YOGYTY1HWL.SMALL.jpg lucylollipop A really simple way to produce metal pendants, keyings, and charms is to cast metal into moulds. The moulds you make can be be produced out of a variety of materials - if you use pewter or another low melt allow, you can cast into anything from Cardboard to MDF to Acrylic, and a whole host of materi...
By: lucylollipop

Continue Reading »]]> Sun, 19 Feb 2012 14:24:01 PST http://www.instructables.com/id/Use-an-empty-fizzy-drink-bottle-to-make-a-bracelet/ http://www.instructables.com/files/deriv/FBI/DX6N/GY4RAOK8/FBIDX6NGY4RAOK8.SQUARE2.jpg http://www.instructables.com/files/deriv/FBI/DX6N/GY4RAOK8/FBIDX6NGY4RAOK8.SQUARE.jpg http://www.instructables.com/files/deriv/FBI/DX6N/GY4RAOK8/FBIDX6NGY4RAOK8.SMALL.jpg acarden To make this bracelet holder I filled the bottle with some leftover beads I had lying around.  These didn't take up much space in the bottle so I filled the rest with a cheapo scarf. I painted the outside of the bottle with a transparent pink nailpolish and then let the scarf hang over the top sligh...
By: acarden

Continue Reading »]]> Sun, 5 Feb 2012 20:55:25 PST http://www.instructables.com/id/DIY-Chain-necklace/
D.I.Y: Chain necklace - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F4N/WN9U/GXFXNI9L/F4NWN9UGXFXNI9L.SQUARE2.jpg http://www.instructables.com/files/deriv/F4N/WN9U/GXFXNI9L/F4NWN9UGXFXNI9L.SQUARE.jpg http://www.instructables.com/files/deriv/F4N/WN9U/GXFXNI9L/F4NWN9UGXFXNI9L.SMALL.jpg arsyparsy Over the past two weeks I began purchasing basic things to create my own jewellery. After receiving my eyepins, jumprings, 5 metres of chain and lobster clasps in the mail I decided to begin :) So this is a tutorial on how to create the necklace I'm wearing in the image above. You will need the fo...
By: arsyparsy

Continue Reading »]]> Sun, 15 Jan 2012 20:09:08 PST http://www.instructables.com/id/Wire-Bracelet/
Wire Bracelet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FT0/DRHJ/GVOX0R65/FT0DRHJGVOX0R65.SQUARE2.jpg http://www.instructables.com/files/deriv/FT0/DRHJ/GVOX0R65/FT0DRHJGVOX0R65.SQUARE.jpg http://www.instructables.com/files/deriv/FT0/DRHJ/GVOX0R65/FT0DRHJGVOX0R65.SMALL.jpg windswept and interesting Hi, welcome to this instructable on making a wire and bead bracelet, the great thing about this is that it is totaly solder free so its safe to do with younger children as well as yourself, please do take care with any sharp ends of wire tho.  Materials 1.5 mm silver plated wire ( you can buy some...
By: windswept and interesting

Continue Reading »]]> Sun, 4 Dec 2011 13:55:42 PST http://www.instructables.com/id/Metal-Pattern-Placement/
Metal Pattern Placement - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FU6/QTXP/GUI0SXTA/FU6QTXPGUI0SXTA.SQUARE2.jpg http://www.instructables.com/files/deriv/FU6/QTXP/GUI0SXTA/FU6QTXPGUI0SXTA.SQUARE.jpg http://www.instructables.com/files/deriv/FU6/QTXP/GUI0SXTA/FU6QTXPGUI0SXTA.SMALL.jpg celtic_smith This instructable will detail one way to transfer a durable pattern onto metal for engraving, piercing etc. To complete this instructable you will need the following materials: A piece of metal sheet brass/copper/silver/whatever Paper Towel Acetone A Photocopy of the design you wish to transfer ...
By: celtic_smith

Continue Reading »]]> Wed, 2 Nov 2011 09:45:36 PDT http://www.instructables.com/id/Easy-beady-earrings/
Easy beady earrings - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FHN/SQUU/GQYG66BP/FHNSQUUGQYG66BP.SQUARE2.jpg http://www.instructables.com/files/deriv/FHN/SQUU/GQYG66BP/FHNSQUUGQYG66BP.SQUARE.jpg http://www.instructables.com/files/deriv/FHN/SQUU/GQYG66BP/FHNSQUUGQYG66BP.SMALL.jpg Nelyan I cleaned out my crafting-goods and sorted them out by use, and I happened to find a pair of old parrot-earrings, which I had decided to turn into something less tacky and useful. I got my jewellery-toolkit and found myself with two pairs of earrings in less than 5 minutes. These pairs go well with...
By: Nelyan

Continue Reading »]]> Mon, 8 Aug 2011 10:53:54 PDT http://www.instructables.com/id/Start-New-Thin-Coil-Wire/
Start New Thin Coil Wire - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FCR/5S56/GPVF24MY/FCR5S56GPVF24MY.SQUARE2.jpg http://www.instructables.com/files/deriv/FCR/5S56/GPVF24MY/FCR5S56GPVF24MY.SQUARE.jpg http://www.instructables.com/files/deriv/FCR/5S56/GPVF24MY/FCR5S56GPVF24MY.SMALL.jpg amandajewls How to start a new coiling wire on a project so it is neat. Tools required: Flat Needle Nose Pliers w/o ridges Wire Cutters New coiling wire Existing jewellery project Summary: When coiling often you run out of the current wire before the end of the coiling section.  With this tutorial learn how ...
By: amandajewls

Continue Reading »]]> Fri, 8 Jul 2011 21:02:41 PDT http://www.instructables.com/id/Start-Wire-onto-Jewellery-Project/
Start Wire onto Jewellery Project - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F9R/F7OF/GPBDGSO3/F9RF7OFGPBDGSO3.SQUARE2.jpg http://www.instructables.com/files/deriv/F9R/F7OF/GPBDGSO3/F9RF7OFGPBDGSO3.SQUARE.jpg http://www.instructables.com/files/deriv/F9R/F7OF/GPBDGSO3/F9RF7OFGPBDGSO3.SMALL.jpg amandajewls In wire wrapping, often you need to start a wire onto an existing project.  But how do you do this without having spikey bits and sloppy work? For this tutorial you will need: 1. Two short pieces of practice wire of different gauges, one thicker, one thinner. 2. Flat Needle Nose pliers 3. Wire cu...
By: amandajewls

Continue Reading »]]> Thu, 30 Jun 2011 23:36:40 PDT http://www.instructables.com/id/Open-Loop-or-Attach-New-Wire-to-Project/
Open Loop or Attach New Wire to Project - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FN0/9XOQ/GPBDGSN2/FN09XOQGPBDGSN2.SQUARE2.jpg http://www.instructables.com/files/deriv/FN0/9XOQ/GPBDGSN2/FN09XOQGPBDGSN2.SQUARE.jpg http://www.instructables.com/files/deriv/FN0/9XOQ/GPBDGSN2/FN09XOQGPBDGSN2.SMALL.jpg amandajewls Ever wondered how to attach a basic loop to a project without distorting the original loop? For this tutorial you need: 1. Already formed basic loop 2. Something to attach loop to. 3. Flat needle nose pliers Opening the Loop Start with a basic loop at the end of the wire. Open sideways with ...
By: amandajewls

Continue Reading »]]> Thu, 30 Jun 2011 23:19:51 PDT http://www.instructables.com/id/Using-leftovers-to-make-a-cool-bracelet/
Using leftovers to make a cool bracelet. - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FSY/K90E/GO6V9LTZ/FSYK90EGO6V9LTZ.SQUARE2.jpg http://www.instructables.com/files/deriv/FSY/K90E/GO6V9LTZ/FSYK90EGO6V9LTZ.SQUARE.jpg http://www.instructables.com/files/deriv/FSY/K90E/GO6V9LTZ/FSYK90EGO6V9LTZ.SMALL.jpg darya1ram Things you will need: Leftover pieces of leather or faux leather strips. A chain long enough to go around your wrist. 2 jump rings Large Crimp beads Pliers Cut your leather strips to 1.5-2 cm Attaching the pieces to your chain Simply fold the leather piece in 2 over the chain and place a crim...
By: darya1ram

Continue Reading »]]> Fri, 27 May 2011 15:07:00 PDT http://www.instructables.com/id/Safety-pin-Bracelet-1/
Safety pin Bracelet!!!! - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F1F/MIC4/GNXWYSIU/F1FMIC4GNXWYSIU.SQUARE2.jpg http://www.instructables.com/files/deriv/F1F/MIC4/GNXWYSIU/F1FMIC4GNXWYSIU.SQUARE.jpg http://www.instructables.com/files/deriv/F1F/MIC4/GNXWYSIU/F1FMIC4GNXWYSIU.SMALL.jpg Nicole_David To make this u'll need: large safety pins - 70 (approx) lots of small beads  elastic cords - 2  step 1 Firstly open up a safety pin and just thread lots of beads onto it, almost till the tip, then close it... step 2 Repeat with all the other safety pins.... Then thread the safety pins onto ...
By: Nicole_David

Continue Reading »]]> Sun, 22 May 2011 10:51:58 PDT http://www.instructables.com/id/Brass-Teardrop-Pendant/ http://www.instructables.com/files/deriv/FE2/VBSF/GMIGH47T/FE2VBSFGMIGH47T.SQUARE2.jpg http://www.instructables.com/files/deriv/FE2/VBSF/GMIGH47T/FE2VBSFGMIGH47T.SQUARE.jpg http://www.instructables.com/files/deriv/FE2/VBSF/GMIGH47T/FE2VBSFGMIGH47T.SMALL.jpg mdog93 Here are some picture of a teardrop pendant i made out of a small scrap of brass sheet metal. I based my piece on Mrballeng 's instructable, Teardrop Pendant . I'd been looking at all of his instructables and was really interested in having a go myself, but this was the only one that i had the right...
By: mdog93

Continue Reading »]]> Fri, 22 Apr 2011 11:07:34 PDT http://www.instructables.com/id/How-To-Make-a-Keyboard-Ring/ http://www.instructables.com/files/deriv/FM4/DLB0/GMQ2LNL5/FM4DLB0GMQ2LNL5.SQUARE2.jpg http://www.instructables.com/files/deriv/FM4/DLB0/GMQ2LNL5/FM4DLB0GMQ2LNL5.SQUARE.jpg http://www.instructables.com/files/deriv/FM4/DLB0/GMQ2LNL5/FM4DLB0GMQ2LNL5.SMALL.jpg Crafty Tips How To Make a Keyboard Ring
By: Crafty Tips

Continue Reading »]]> Thu, 21 Apr 2011 01:09:52 PDT http://www.instructables.com/id/Macrame-bead-bracelets/ http://www.instructables.com/files/deriv/FY8/8KT7/GLWQWB07/FY88KT7GLWQWB07.SQUARE2.jpg http://www.instructables.com/files/deriv/FY8/8KT7/GLWQWB07/FY88KT7GLWQWB07.SQUARE.jpg http://www.instructables.com/files/deriv/FY8/8KT7/GLWQWB07/FY88KT7GLWQWB07.SMALL.jpg BlueberryCrazy I made these bracelets with twine and beads. The twine was originally a light brown color. To dye it I soaked it in a jar of hot water with some ground coffee and  tea bags. I let the twine soak for a few days then had to rinse it all out several times to get the coffee/tea smell. Finally after dr...
By: BlueberryCrazy

Continue Reading »]]> Sun, 3 Apr 2011 23:12:19 PDT http://www.instructables.com/id/Spiral-Dangles-and-Spiral-Head-Pins/
Spiral Dangles and Spiral Head Pins - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FFH/LHKU/GJQEJ9BY/FFHLHKUGJQEJ9BY.SQUARE2.jpg http://www.instructables.com/files/deriv/FFH/LHKU/GJQEJ9BY/FFHLHKUGJQEJ9BY.SQUARE.jpg http://www.instructables.com/files/deriv/FFH/LHKU/GJQEJ9BY/FFHLHKUGJQEJ9BY.SMALL.jpg amandajewls Head pins are an essential part of making your own beaded jewellery, but who likes to use the same flat top head pin all the time?  Those "special" head pins from the bead shop are cost prohibitive.  What do you do? I make my own out of continuous wire so that I can have a bit of glitz and glamour ...
By: amandajewls

Continue Reading »]]> Fri, 4 Feb 2011 23:17:57 PST http://www.instructables.com/id/Head-Pin/
Basic Head Pin - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FRP/1W2J/GJQE8RFV/FRP1W2JGJQE8RFV.SQUARE2.jpg http://www.instructables.com/files/deriv/FRP/1W2J/GJQE8RFV/FRP1W2JGJQE8RFV.SQUARE.jpg http://www.instructables.com/files/deriv/FRP/1W2J/GJQE8RFV/FRP1W2JGJQE8RFV.SMALL.jpg amandajewls Have you ever been working on a jewellery project only to find that you have run out of that particular head pin required for the job?  It's too late to head for the bead shop and online won't deliver for 3 business days.  What do you do? By keeping a continuous roll of craft wire around the house ...
By: amandajewls

Continue Reading »]]> Fri, 4 Feb 2011 22:35:44 PST http://www.instructables.com/id/Hammered-Wire-Spiral-Clasp/
Hammered Wire Spiral Clasp - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FBC/VJUR/GJQE8R48/FBCVJURGJQE8R48.SQUARE2.jpg http://www.instructables.com/files/deriv/FBC/VJUR/GJQE8R48/FBCVJURGJQE8R48.SQUARE.jpg http://www.instructables.com/files/deriv/FBC/VJUR/GJQE8R48/FBCVJURGJQE8R48.SMALL.jpg amandajewls Learn to create a sturdy, unique wire clasp finding to use on your homemade jewellery.  The clasp can be made in petite sizes or large, bold sizes depending on the wire gauge used.  Smaller clasps can be made on 1 mm (18 gauge) round wire and larger clasps made on 1.5 mm (14 gauge) round wire.  I w...
By: amandajewls

Continue Reading »]]> Fri, 4 Feb 2011 20:13:55 PST http://www.instructables.com/id/Prescious-Metal-Clay-PMC-Mould-Making/
Prescious Metal Clay (PMC) Mould Making - More DIY How To Projects]]> http://www.instructables.com/files/deriv/F0N/2G1U/GINP5506/F0N2G1UGINP5506.SQUARE2.jpg http://www.instructables.com/files/deriv/F0N/2G1U/GINP5506/F0N2G1UGINP5506.SQUARE.jpg http://www.instructables.com/files/deriv/F0N/2G1U/GINP5506/F0N2G1UGINP5506.SMALL.jpg amandajewls This instructable is how to create a precious metal clay (PMC), metal clay (copper and bronze) or polymer clay mould from which to cast an organic odd-shaped item. This Instructable will not cover how to use or fire Precious Metal Clay, rather how to create and test your moulds to ensure the desire...
By: amandajewls

Continue Reading »]]> Sat, 8 Jan 2011 19:58:38 PST http://www.instructables.com/id/Portable-cardboard-earring-holder/
Portable cardboard earring holder - More DIY How To Projects]]> http://cdn.instructables.com/FI9/MH3L/GCPZMAM1/FI9MH3LGCPZMAM1.SQUARE2.jpg http://cdn.instructables.com/FI9/MH3L/GCPZMAM1/FI9MH3LGCPZMAM1.SQUARE.jpg http://cdn.instructables.com/FI9/MH3L/GCPZMAM1/FI9MH3LGCPZMAM1.SMALL.jpg Halligator I wanted a way to carry and protect some of my dangly earrings when away from home, and because I'm a bit obsessive, I wanted to keep them all organised and pretty :D The project takes a box and makes an inner panel for it, which will hold your earrings. I'm afraid the design only accommodates earri...
By: Halligator

Continue Reading »]]> Fri, 13 Aug 2010 07:47:12 PDT http://www.instructables.com/id/key-ring-necklace/
key ring necklace - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FY1/8DLD/G51GRK4H/FY18DLDG51GRK4H.SQUARE2.jpg http://www.instructables.com/files/deriv/FY1/8DLD/G51GRK4H/FY18DLDG51GRK4H.SQUARE.jpg http://www.instructables.com/files/deriv/FY1/8DLD/G51GRK4H/FY18DLDG51GRK4H.SMALL.jpg shkare i ljepilo cool necklace made of keyrings.this is my idea i didnt stole it from anybody Materials you need 1x LITTLE CHAIN you can find it on your old wallet 11x KEYRING you can find them on some keychains you never use 1x the thing what holds your necklace connect connect 2 keyrings like this somewhere...
By: shkare i ljepilo

Continue Reading »]]> Sun, 31 Jan 2010 06:23:47 PST http://www.instructables.com/id/How-to-make-a-toothbrush-bracelet/
How to make a toothbrush bracelet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FI3/18GM/G4UH96ZA/FI318GMG4UH96ZA.SQUARE2.jpg http://www.instructables.com/files/deriv/FI3/18GM/G4UH96ZA/FI318GMG4UH96ZA.SQUARE.jpg http://www.instructables.com/files/deriv/FI3/18GM/G4UH96ZA/FI318GMG4UH96ZA.SMALL.jpg caraban1 Hello, and welcome to the illustrated step-by-step process for making a toothbrush bracelet. This is a great way to reuse an item that you may have otherwise thrown out. In six simple steps you will turn your toothbrush into a one-of-a-kind fashion accessory! You will need... Pull out bristle...
By: caraban1

Continue Reading »]]> Thu, 28 Jan 2010 15:41:59 PST http://www.instructables.com/id/Handmade-wire-necklace/
Handmade wire necklace - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FNI/JKWF/G2HE06O3/FNIJKWFG2HE06O3.SQUARE2.jpg http://www.instructables.com/files/deriv/FNI/JKWF/G2HE06O3/FNIJKWFG2HE06O3.SQUARE.jpg http://www.instructables.com/files/deriv/FNI/JKWF/G2HE06O3/FNIJKWFG2HE06O3.SMALL.jpg beadydani Make a long beaded necklace with a difference. This tutorial will show you how to make your own links rather than a manufactured chain, beware it is addictive. Don't be put off by the number of steps, it is very easy, it is only a guide once you get the hang of this technique you will never want to ...
By: beadydani

Continue Reading »]]> Thu, 3 Dec 2009 12:40:31 PST http://www.instructables.com/id/Bike-chain-bracelet-1/
Bike chain bracelet - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FOV/60RW/G1QWAASE/FOV60RWG1QWAASE.SQUARE2.jpg http://www.instructables.com/files/deriv/FOV/60RW/G1QWAASE/FOV60RWG1QWAASE.SQUARE.jpg http://www.instructables.com/files/deriv/FOV/60RW/G1QWAASE/FOV60RWG1QWAASE.SMALL.jpg MrLouque  This is a very easy thing to make. It is a old bike chain turned into a awesome bracelet. My friend actually threw it at me and I picked it up and turned it into a bracelet. Materials  You will need:-A bike chain-Some teflon tape-A screw-Possibly a hacksaw Fitting the screw  You need the scre...
By: MrLouque

Continue Reading »]]> Sun, 8 Nov 2009 17:10:44 PST http://www.instructables.com/id/How-To-Make-Soldered-Jewellery/
How To Make Soldered Jewellery - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FE0/UZQQ/FZQ1FD11/FE0UZQQFZQ1FD11.SQUARE2.jpg http://www.instructables.com/files/deriv/FE0/UZQQ/FZQ1FD11/FE0UZQQFZQ1FD11.SQUARE.jpg http://www.instructables.com/files/deriv/FE0/UZQQ/FZQ1FD11/FE0UZQQFZQ1FD11.SMALL.jpg Prosthetics01 I just had this idea one day in a workshop, so i did it. turned out awesomely. thought to myself, i should put this on instructables. so i have. It took me a few goes to get this right, but then again, i believe i was the first to do this. Pretty much the title says it all. Make a peice of shiny s...
By: Prosthetics01

Continue Reading »]]> Thu, 17 Sep 2009 21:20:25 PDT http://www.instructables.com/id/How-to-make-a-button-cuff/
How to make a button cuff - More DIY How To Projects]]> http://www.instructables.com/files/deriv/FGH/K05G/FYNTAJAY/FGHK05GFYNTAJAY.SQUARE2.jpg http://www.instructables.com/files/deriv/FGH/K05G/FYNTAJAY/FGHK05GFYNTAJAY.SQUARE.jpg http://www.instructables.com/files/deriv/FGH/K05G/FYNTAJAY/FGHK05GFYNTAJAY.SMALL.jpg elvenroi I was inspired by this book. http://www.amazon.com/Craftivity-40-Projects-DIY-Lifestyle/dp/0060841303However the design in the book wasn't really masculine enough for me, so I made some adjustments.You will need:1.Buttons ( I used the green buttons off my Army uniform [fellow Singaporeans will recog...
By: elvenroi

Continue Reading »]]> Tue, 25 Aug 2009 02:53:54 PDT